* [ecovacs] Allow loading device descriptions from a user file
If a new device is released within our release cycle, getting the
description for that device into the binding was impossible for users
before. With this change, they can create an override file in their
installation (with contents we'll need to supply to them), which serves
as a stop-gap solution until the next OH release.
Signed-off-by: Danny Baumann <dannybaumann@web.de>
* [knx] Fix decoding of DPT 242.600 and add tests
Correct handling of parameter Y for DPT 242.600.
Add back to back tests of DPT 232.600 and 242.600,
testing color conversion from raw bytes to HSB and
back to Calimero color representation as String.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
the min/max from the config are specifically only for the set point.
i.e. for a heater in winter when the heater is off, it may have
a set point range of 65-104°F, but if it's off for an unoccopied room
the ambient temperature might drop far below 65
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [ipcamera] Fix servlet exceptions due to non unique names
[IP camera] on OH4 has the same servlet issue that was fixed by PR #14554. This PR uses that PR as a template to fix the issue in the IPcamera binding. (That issue being that only one camera was able to stream.) This was tested locally on OH4M2 and it works.
Signed-off-by: Bob Eckhoff <katmandodo@yahoo.com>
* Add device properties
* Add vendor and model properties
* Use model as label in discovery
Resolves#14828
---------
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Add allowed pattern to description
* Increase allowed duration to 12h - thats what the web gui allows
Signed-off-by: Christian Jonak-Möchel <christian@jonak.org>
* [deconz] update the roller shutter status (14826)
- if the REST interface from deconz provides a 'lift' value to show
the current position of the roller shutter, it will be used.
Signed-off-by: Daniel Zainzinger <dza1@mailbox.org>
Carryover from smarthomej/addons#107.
Update to match current implementation in KNX binding
and Calimero 2.5.1.
Also-by: Jan N. Klug <github@klug.nrw>
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
The wrong key was used in the `cachedTransformations` map. Instead of the correctyl localized UID from the registry the provided transformation function was used.
Signed-off-by: Jan N. Klug <github@klug.nrw>
* [windcentrale] Adapt binding to new API
Reworks the binding so it can be used with the new API that also requires authentication.
Also adds the following:
* Account things to provide authentication details
* Implementation for getting and refreshing tokens using AWS Cognito
* Windmill discovery based on the participations in projects
* Properties with additional data for windmills like turbine type, build year, location coordinates
* Adds support for "Het Vliegend Hert" windmill
* Unit tests for JSON (de)serialization
Fixes#13625
Signed-off-by: Wouter Born <github@maindrain.net>
* Declare connection on few bindings
* Corrected format of gce addons.xml.
* Removed myself from VolvoOnCall binding codeowners.
* Adding countries where fr makes sense.
Signed-off-by: Gael L'hopital <gael@lhopital.org>
- Add new channel definition for silent mode
- Implement silent mode service
- Add unit tests
- Add documentation
- Fix some minor documentation issues
Closes#14779
Signed-off-by: David Pace <dev@davidpace.de>
- fix door/window contact device model (SWD instead of WRC2)
- fix in-wall light switch device model (BSM instead of PSM)
- fix thing type of BWTH (should be a wall thermostat, not a thermostat)
- add association for PSM (smart plug)
- add association for LEDVANCE_LIGHT (smart light bulb)
- add association for TRV (thermostat)
Closes#14672
Signed-off-by: David Pace <dev@davidpace.de>
* Apply markdown fixes for bindings with letter _t_
* Apply markdown fixes for bindings with letter _u_
* Apply markdown fixes for bindings with letter _v_
* Apply markdown fixes for bindings with letter _w_
* Apply markdown fixes for bindings with letter _x_
* Apply markdown fixes for bindings with letter _y_
* Apply markdown fixes for bindings with letter _z_
Signed-off-by: Jerome Luckenbach <github@luckenba.ch>
* Solve duplicate id on single home
* Solving "Handler DeviceHandler of thing netatmo:welcome:compte:maison:camera tried accessing its bridge although the handler was already disposed."
Signed-off-by: clinique <gael@lhopital.org>
* New translations fineoffsetweatherstation.properties (German)
* New translations tr064.properties (German)
* New translations rollershutter.properties (German)
* New translations vat.properties (German)
* New translations mielecloud.properties (German)
* New translations speedtest.properties (Italian)
* [knx] Improve config description for GAs
Carryover from smarthomej/addons#257.
Also-by: Jan N. Klug <github@klug.nrw>
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
If an exception occurs during httpClient.start(), webSocketClient
remained null, which led to another (then unhandled) exception being thrown
by dispose(), called in the exception handler.
With the new initialization order it's ensured webSocketClient is not
null at dispose() time, thus allowing proper propagation of the
exception thrown at HTTP startup.
Signed-off-by: Danny Baumann <dannybaumann@web.de>
* Send int values to API, not decimal
* Added missing channels in README for L920 + minor thing file config
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* [boschshc] Code Enhancements
This commit fixes several compiler warnings as well as several
Checkstyle, FindBugs, PMD and Sonar issues.
* instantiate loggers consistently
* add missing logger calls
* add chained exceptions to logger calls
* provide central Gson instance that does not serialize or deserialize
loggers
* avoid catching NullPointerExceptions
* extract methods where cyclomatic complexity was too high
* remove unnecessary null check in combination with instanceof
* rename local variables that shadow fields
* add missing @NonNull and @Nullable annotations
Signed-off-by: David Pace <dev@davidpace.de>
* [enocean] Support for gas sensors from A5_09 group
Implementing support for gas sensors with EEP A5_09_02, 04, 05, 08, 09,
0C, 0D, adding new changels - CO, CO2, VOC, VOCId, TVOC and regenerate
I18N properties file
Fixes#13785, #13472
Signed-off-by: Zhivka Dimova <zhivka.dimova@myforest.net>
https://github.com/openhab/openhab-addons/pull/12238 was merged after
JSON Schema Light was implemented, and changed some assumptions.
this commit adjusts to the changed interface
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* New translations deconz.properties (German)
* New translations netatmo.properties (Italian)
* New translations avmfritz.properties (German)
* New translations openwebnet.properties (Italian)
* [veSync] Device Identification Updates
* [veSync] Alignment to device setups in pyvesync.
* [veSync] Addition of new device code for C302S
Signed-off-by: David Goodyear <david.goodyear@gmail.com>
* [mqtt.homeassistant] implement JSON schema lights
* [mqtt.homeassistant] use enum for current state of color mode
* [mqtt.homeassistant] use implicit lambdas
* [mqtt.homeassistant] remove string constants in favor of an enum
* [mqtt.homeassistant] allow sending ON and brightness commands through bare
* [mqtt.homeassistant] turn down debug logging
---------
Signed-off-by: Cody Cutrer <cody@cutrer.us>
Remove binding (replaced by livisismarthome)
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
Signed-off-by: Sven Strohschein <novanic@gmx.de>
* [netatmo] Web hook extension for camera events
- Unused camera-event trigger channel removed
- README updated to the real supported channels (compared with channels.xml and code)
- Camera capabilities are now triggering the home-event trigger channel
- New home-event trigger channel introduced at camera level
- New sub-event channels introduced for the presence camera which is updated by web hook events.
- Language file updated
- README updated
- typos fixed
- security-event trigger channel added for the Welcome camera
- Handling of sub-event groups fixed to work with doorbell and presence cameras.
---------
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
Signed-off-by: Sven Strohschein <novanic@gmx.de>
* [openwebnet] reset zones alarm channel when system is armed and added NONE state
* [openwebnet] added Technical reset alarm. Changes after 1st review
---------
Signed-off-by: Massimo Valla <mvcode00@gmail.com>
* #14195 Bridge and Device Discovery
Bridge discovery is implemented via mDNS, local IP addresses are checked.
If a GET returns the public SHC information,
then this shcIpAddress is reported as a discovered bridge.
Devices are always discovered after successful pairing, but a manual scan is also possible.
Added unit tests for Bridge and Device Discovery.
Signed-off-by: Gerd Zanker <gerd.zanker@web.de>
* Add POJOs for ecoFeedback from Miele REST API
* DeviceState offers water and energy consumption
* Convert Quantity to State for channel population
* Add eco feedback channels to devices
* Fix item types and categories
* Add update instructions for eco feedback channels
Signed-off-by: Björn Lange <bjoern.lange@itemis.de>
* [tapocontrol] support display light effects for L530
color change is now possible if effect was already enabled by app
Signed-off-by: Christian Wild <christian@wildclan.de>
* [homekit] unify all enum handling
regardless of if it's a required or optional characteristic,
or even "boolean" enums
then allow number or switch items to be linked with enums
then update the docs listing the numeric value for enums
as part of this, global configuration of thermostat enum values
is no longer supported; you must use metadata.
in particular, for GarageDoorOpener, the global settings didn't
even actually work, so they should work now.
Fixes#13595
* [homekit] default-invert boolean items for garage door states
this was previously handled explicitly by the switch statement.
so need to set the inverted flag now that we're building a
mapping instead
* [homekit] document that CurrentDoorState can be linked to a Contact item
* [homekit] improve docs on invert param to createMapping
also fix a new helper method not properly passing through the inverted
param
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [ecovacs] Initial contribution
Add initial version of a binding for vacuum cleaners made by Ecovacs.
Signed-off-by: Danny Baumann <dannybaumann@web.de>
* port changes
* update instructions
* Incorporate review comments from #14134
* new improvements (mostly Java 17 changes)
* further improvements
Signed-off-by: Jan N. Klug <github@klug.nrw>
* [knx] Refactoring, add basic support for UOM
Preparation for refactoring KnxCoreTypeMapper.
Carryover from smarthomej/addons#107.
Merge UOM implementations.
* [knx] Adapt tests
DPT strings for QuantityType now strip off a tailing .0 when decimals
are converted.
* [knx] Refactoring
Use pattern matching with instanceof operator (new Java17 feature).
* [knx] Refactoring, performance improvements
Introduce KNXChannel class.
Carryover from smarthomej/addons#114.
* [knx] Add warning for incompatible DPT type
Configuring incompatible DPT/channel combinations (e.g. DPT 1.005 (alarm) on Contact channels
or DPT 1.019 (windows/door) on Switch channels) is not allowed but was silently ignored.
This PR adds a warning in case incompatible configurations are detected.
Carryover from smarthomej/addons#203.
* [knx] Add full support for UoM
Replace UoM handling with the implementation from smarthome/j.
Carryover from smarthomej/addons#206.
* [knx] Refactor KNXCoreTypeMapper, add RGBW and xyY
Carryover from smarthomej/addons#208.
* [knx] Fix RGB conversion
Carryover from smarthomej/addons#219.
* [knx] Remove workarounds obsoleted by Calimero 2.5
Carryover from smarthomej/addons#226.
* [knx] Add parameter for disabling incoming UoM
Carryover from smarthomej/addons#230.
* [knx] Fix fallback to DecimalType in number conversion
Carryover from smarthomej/addons#279.
* [knx] Fix DPT 251.600 decoding
Carryover from smarthomej/addons#349.
* [knx] Fix UoM handling for special types
* [knx] Add test for KNXChannelFactory
* [knx] Update CODEOWNERS for knx
* [knx] Default conversion for DPT 5.001 and 6.001
* [knx] Fix write blocked forever after read from bus
Carryover from smarthomej/addons#299 and smarthomej/addons#330.
* [knx] Use new class ColorUtil from core for HSB conversion
Also-by: Jan N. Klug <github@klug.nrw>
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* New translations openweathermap.properties (Italian)
* New translations netatmo.properties (Italian)
* New translations qolsysiq.properties (Italian)
* New translations astro.properties (German)
* New translations astro.properties (Italian)
* New translations danfossairunit.properties (Danish)
Remove the unused headings for generation 2. There is probably a manual missing for gen 2, but while this is the case the headlines can be removed
Signed-off-by: Felix Schneider <fs@felix-schneider.org>
* Use code fence for intents
* Fix Item type of awake-state
* Pretty print JSON and add Netflix
Signed-off-by: mueller-ma <mueller-ma@users.noreply.github.com>
This is a major version upgrade from 9.3.x, raising the compatibility level up from Ruby 2.6 to Ruby 3.1
Signed-off-by: Jimmy Tanagra <jcode@tanagra.id.au>
* Add thing type update instructions
* Move thingTypeVersion to correct thing type
* Add groupIds to update instructions
Signed-off-by: Mark Hilbush <mark@hilbush.com>
* [mqtt.generic] separate command parsing from cached value updating
fixes#12150
Previously, Value.update would parse the command, _and_ update the cached
value with that command. Which means that when sending a command towards
MQTT (instead of processing an update from MQTT), the cached value was
unintentionally updated. This prevented the REFRESH command from returning
the most recent value received from the device.
Separating the two concerns also makes the test more obvious what they are
testing, and vastly simplified a kludgy workaround that RollershutterValue
was using to be able to process Commands that aren't States.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [mqtt.generic] split Value::parseCommand into parseMessage
so that a particular value type subclass can have varying implementations
if it desires
---------
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* New translations iCloud.properties (German)
* New translations miele.properties (German)
* New translations jruby.properties (German)
* New translations mqtt.properties (German)
* New translations influxdb.properties (German)
* New translations homekit.properties (German)
* New translations amazonechocontrol.properties (German)
* New translations amazonechocontrol.properties (German)
* New translations systeminfo.properties (German)
* New translations tado.properties (German)
* New translations bluetooth.properties (German)
* New translations bluetooth.properties (German)
* New translations mybmw.properties (German)
* New translations gardena.properties (German)
* New translations astro.properties (German)
* New translations avmfritz.properties (German)
* New translations chromecast.properties (German)
* New translations hue.properties (German)
* New translations logreader.properties (German)
* New translations icalendar.properties (German)
* New translations max.properties (German)
* New translations comfoair.properties (German)
* New translations denonmarantz.properties (German)
* New translations deutschebahn.properties (German)
* New translations dwdpollenflug.properties (German)
* New translations ecotouch.properties (German)
* New translations epsonprojector.properties (German)
* New translations exec.properties (German)
* New translations homematic.properties (German)
* New translations hpprinter.properties (German)
* New translations http.properties (German)
* New translations magentatv.properties (German)
* New translations awattar.properties (German)
* Update EcobeeUtils.java
Correcting rounding of setHold values so we have 0.1°F tolerance instead of 1°F. Makes it easier to use in °C
Signed-off-by: darthbevis <darthbevis@gmail.com>
* Rework Servlets to use Http Whiteboard annotations in favor of proprietary `org.openhab.core.io.http.servlet` classes
* Resolve itest runbundles
* Fix dependency issues
* Catch proper exception when starting hueemulation UpnpServer
Also-by: Jan N. Klug <github@klug.nrw>
Signed-off-by: Wouter Born <github@maindrain.net>
* [dsmr] Improved error handling to better handle corrupt messages.
- Fix incorrect additional key in bridge discovery service.
- When corrupted P1 telegram is received don't set directly to offline, but let the watchdog do this if to many times this happens.
This makes it a bit more lenient for receiving a bad telegram once in a while. Because some connections are not that stable.
- Simplified error handling, and listeners to one enum/interface to make it more cleaner.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* Solving issue #14458
Signed-off-by: clinique <gael@lhopital.org>
* Removes the usage of "app.netatmo.net" since api now holds these entry points.
I think it was the origin of malfunction of floodlight (to be controlled by somebody who has one).
--------
Signed-off-by: clinique <gael@lhopital.org>
* New translations airquality.properties (Italian)
* New translations adorne.properties (Italian)
* New translations airq.properties (Italian)
* New translations airvisualnode.properties (Italian)
* New translations allplay.properties (Italian)
* New translations amazonechocontrol.properties (Italian)
* New translations amplipi.properties (Italian)
* New translations androiddebugbridge.properties (Italian)
This fix ensures, that the `ReentrantLock::unlock` method is only called, when the Thread is owning the lock.
resolves: #14322
Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>
* [snmp] Upgrades and enhancements
- bug: improve test stability
- enhancement: add support for UoM
- bug: fix misleading error message
- bug: fix initialization exceptions
- enhancement: Add support for SNMPv3
- enhancement: add opaque value handling
Signed-off-by: Jan N. Klug <github@klug.nrw>
* [mail] Make actions names for DSL rules consistent with documentation
Keep old names for backward compatibility.
Actions names are now consistent over all rule engines.
* Review comment: use htmlContent as parameter name
* Review comment: make consistent url and urlList parameters
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* [omnikinverter] Added temperature sensor
* [Omnikinverter] Bugfix for wrong channeltype item-type
Prevents 'Received HTTP PUT request with an invalid item name' when adding items
* [Omnik] Added AC Voltage, Currrent and Frequency and total running hours
Signed-off-by: Dave <leansoft@users.noreply.github.com>
* [jrubyscripting] allow disabling dependency tracking
in case your helper library doesn't support it. or you just don't like
the behavior.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [unifi] Added channels name and hostname to client things.
Also some changes related to the guestVoucher changes.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
HomematicIP added humidity and HVAC control mode under new channel
HEATING_CLIMATECONTROL_TRANSCEIVER|HUMIDITY. Those channels won't
show in PaperUI unless "Advanced" is selected. This pull request
adds those channels as standard.
Impacted HomematicIP devices: HmIP-BWTH, HmIP-BWTH24,
HmIPW-STHD, HmIPW-STH, HmIPW-WTH, HmIP-STHD, HmIP-STH, HMIP-WTH,
HmIP-WTH-2, HmIP-WTH-B
The devices HmIP-eTRV* and HmIP-WT only support CONTROL_MODE not
Humidity.
resolves: #11829
Signed-off-by: Dirk Benecke <dirkbe@web.de>
Signed-off-by: Dirk Benecke <dirkbenecke@Dirks-MBP.fritz.box>
* [openhabcloud] Possible connection leak
* Creates thread safe reconnection, reduces unnecessary polling on setup, removes unused variables.
* adds the reconnect settings to the internal socket.io options.
* Up the min reconnect time
* Use @ssalonen sugestion for backoff mins and randomness
* Reconnect after server initiated disconnect
* Remove unhelpful comments
Signed-off-by: Dan Cunningham <dan@digitaldan.com>
* MyBMW command "horn-blow" not "horn-low"
The command is "horn-blow" not "horn-low".
Tested with my car: "horn-blow" works, "horn-low" does not.
* (MyBMW] command "light-flash" not "flash-lights"
The command is "light-flash" not "flash-lights".
Tested with my car: "light-flash" works, "flash-lights" does not.
* [mqtt.homeassistant] support command_template for fan components
* [mqtt.homeassistant] fix field declaration for consistency
Signed-off-by: Cody Cutrer <cody@cutrer.us>
openHAB doesn't have the concept of "enabled by default", since _everything_
is technically "disabled" until you link it to an item. It seems devices
use disabled by default on less common entities, such as zigbee2mqtt
marking a binary_sensor as a "backup" method to an update entity for
when an update is available, or a sensor as a "backup" method to a
select entity. So in that case, just hiding these channels unless the user
clicks "Show Advanced" seems to map best.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
Previous code was not working in Java 17.
A thread should not be started after being interrupted.
Fix#14264
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
Updated section on shutter position with info on the automatic calibration's reliance on the actuator's automatic stop message, and that for older actuator's manual setting of shutterRun is required.
* [evcc] Adjust to breaking API changes
Fixes#14231.
See https://github.com/evcc-io/evcc/discussions/5522.
* [evcc] Add battery capacity channel
* [evcc] Version & openHABian note
* [evcc] Use already defined constants in ChannelTypeUIDs
* [evcc] Correct header in evcc.properties
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* [unifi] Various stability improvements
- Fixed bug, causing nullpointer, in devices not reporting voltage/ampere values on PoE ports.
- Added some null checks to avoid having null pointer exceptions.
- Handled timeout exception that is in ExecutionException.
- Improved handling case where server returns data, but it's not from the api, and therefor can't be parsed.
- Improved adding additional text to the error messages by adding the reported exception message too.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* [mimictts] Fix ssml and playing from an audiosink using the audio servlet
Fix :
- ssml not working
- add an option to store the audio on a file before sending it to openhab. It enables audiosink based on the audio servlet to play the sound (the servlet requires the getClonedStream method, unavailable with a pure streaming approach). The files are stored in the user data directory and deleted as soon as possible (stream close detection).
- fix error with voice name not encoded
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [homekit] Implement IrrigationSystem
Fairly trivial now, except that a ServiceLabelService has to be added
to the accessory.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
When changing an enum value in the configuration, we used the wrong data
type: while the value in the OH config is a string (the 'option value' -
see HomematicThingHandler::getValueForConfiguration), internally we use
an integer (the 'option index'), so we have to do the option value ->
option index conversion when applying the new value.
This especially was a problem for HM-MOD-EM-8 devices, which check the
CHANNEL_FUNCTION enum value as part of their initialization routine.
When disabling/enabling them after changing the CHANNEL_FUNCTION enum
value, they went offline, because their initialization failed due to a
NumberFormatException (via
HomematicThingHandler::doInitializeInBackground ->
HmChannel::checkForChannelFunctionChange ->
HmChannel::getCurrentFunction)
Signed-off-by: Danny Baumann <dannybaumann@web.de>
* [homekit] TV accessory
Now possible since we support multiple secondary services. Just need to explicitly
declare that InputSource is a linked service to a Television, not just a secondary
service.
Note also that since TV and related services have so many mandatary characteristics
that are often static, I introduced a new way to declare characteristics -
via metadata on the service's item. Honestly, I feel like it's a lot cleaner to
have a factory create the mandatory characteristics the same way as the optional
characteristics, and then construct the service ourselves instead of basing the
service on the specific accessory interface. But this commit is already big enough,
I didn't want to go refactoring _all_ of the accessories to do it that way just
yet. This is why I have "unused" metadata characteristic factory methods for
AirQuality, HeaterCooler, and Thermostat - I started to make those configurable
via metadata, then realized they were mandatory characteristics that couldn't
be found from metadata via the current infrastructure.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
On server timeouts, it's possible for multiple minutes to elapse
between receiving the last pong on the old connection and attempting to
send the next ping on the new connection. If that time span exceeded 5
minutes, the binding went into a minutely reconnection loop, because it
never attempted to send a ping anymore, which led to lastPong not being
updated anymore.
To fix this, replace the timing dependent timestamp handling by a simple
counter which counts how many consecutive ping attempts didn't receive
an answer, and closing the connection after 5 unsuccessful ping
attempts. That new counter is now also reset whenever the connection is
restarted.
Fixes#14188
Signed-off-by: Danny Baumann <dannybaumann@web.de>
* [miio] add support Xiaomi Smart Air Purifier 4 Pro zhimi.airp.vb4
Adding support for the following models:
* Xiaomi Smart Air Purifier 4 Pro (modelId: zhimi.airp.vb4)
close
Signed-off-by: Marcel Verpaalen <marcel@verpaalen.com>
* [homekit] improve instance management
* allow addressing individual instances for most console commands
* don't restart all instances if simply adding/removing instances on
config change
* clear stored info when removing instances
* [homekit] reset instance identity when clearing pairings
* [homekit] log the actual interface we looked up
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [jsscripting] Fix bundling of global script & regression from #14135
Fixes the regression from https://github.com/openhab/openhab-addons/pull/14135#issuecomment-1369231126.
While working on this, I also noticed that the cache openhab-js does not work because of wrong webpack commandline args in the pom (wrong entrypoint).
* [jsscripting] Enable stack logging for IllegalArgumentExceptions
* [jsscripting] Upgrade openhab-js to 3.2.4
* [jsscripting] Update README for recent PR
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* [jsscripting] Extend comments for wraprequire
* [jsscripting] Enable openhab-js caching to improve performance
On my dev system (which I guess is much more powerful than most openHAB servers), cached openhab-js injection takes 100-200 ms.
openhab-js injection from file system takes about 1000 ms.
* [jsscripting] Update configuration language
* [jsscripting] Upgrade openhab-js version to 3.2.1 for required webpack changes
Documentation updates will follow in another PR to keep this one clean.
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* [velbus] Add new functionality PRESSED and LONG PRESSED and fix bug
New functionnality :
Add the the possibility to simulate the PRESSED and LONG PRESSED message of an input.
Module supported with button simulation :
VMB1RYS (button : CH6)
VMB6IN (buttons : CH1 ... CH6)
VMB2PBN, VMB6PBN, VMB7IN, VMB8IR, VMB8PB, VMB8PBU, VMBEL1, VMBEL2, VMBEL4, VMBGP1, VMBGP1-2, VMBGP2, VMBGP2-2, VMBGP4, VMBGP4-2, VMBGP4PIR, VMBGP4PIR-2 (buttons : CH1 ... CH8)
VMBELO, VMBGPOD, VMBGPOD-2 (buttons : CH1 ... CH32)
Fix bug :
The channels names were not correctly assigned to the thing properties. The last channel had the default name, not the one retrieved from the module.
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* Update bundles/org.openhab.binding.velbus/README.md
Co-authored-by: cedricboon <cedric.boon@hotmail.com>
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* Update bundles/org.openhab.binding.velbus/README.md
Co-authored-by: cedricboon <cedric.boon@hotmail.com>
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* Update bundles/org.openhab.binding.velbus/README.md
Co-authored-by: cedricboon <cedric.boon@hotmail.com>
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* Add trigger on channel when using button simulation
Remove uneeded Thread.sleep in code.
Trigger the events PRESSED, LONG_PRESSED, RELEASED on the linked trigger channel when using the button simulation.
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* Fix redundant superinterface DiscoveryService
Redundant superinterface DiscoveryService for the type VelbusThingDiscoveryService, already defined by AbstractDiscoveryService.
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* Fix bug #11521
Typo in the Counter Channel name for VMB7IN.
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* [velbus] Add VMBELPIR module
Add the module VMBELPIR
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* [velbus] VMBELPIR added to discovery service
Forgot to add the module VMBELPIR in the discovery service.
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* [velbus] Updates clock alarms management
Changes the clocks alarm management :
- Global alarms are now set from the bridge thing.
- Local alarms are still set from the module thing, but the alarm type channels on modules are now readonly.
Reduces the flooding of the bus by adding a delay of 10 seconds before sending the update on the bus :
- Removes the send on the bus after each update of a clock alarm value.
- Sends only the values of the last update after 10 seconds.
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* [velbus] PR modifications
Modifications asked in PR review.
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* [velbus] PR modifications 2
Modifications asked in PR review 2.
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* [velbus] Add modules VMBKP, VMBIN, VMB4PB
New functionnality : Add the support of the modules VMBKP, VMBIN, VMB4PB
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
* [velbus] Fix code style error
Fix code style error in VelbusSensorWithAlarmClockHandler.java
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
Co-authored-by: cedricboon <cedric.boon@hotmail.com>
* Add tests and fix very minor bug
* Correct wrong test
* Update tests and fix sorting
* Some checkstyle improvements
Signed-off-by: lsiepel <leosiepel@gmail.com>
- It seems to throw an exception when updating internal cache. It can happen if you have a switch that has both PoE ports and other PoE ports or data in the port override.
- Fixed logout, should be POST instead of GET.
- Fixed typo in channel-type.config.unifi.poeEnable.mode.option.pasv24 should be without appending v.
- Removed compiler warnings.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* [jsscripting] Share org.graalvm.polyglot.Engine across all OpenhabGraalJSScriptEngine instances
See https://github.com/oracle/graaljs/issues/121#issuecomment-880056648, it is not required to have one engine per GraalJSScriptEngine.
This might improve performance a bit on less powerful systems (Raspberry Pi) and decreases heap usage:
With 5 GraalJS UI scripts, heap usage is now below 100 MB. Before this change, it was over 100 MB.
* [jsscripting] Extend debug logging
* [jsscripting] Cache `@jsscripting-globals.js` across all engines
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* [jsscripting] Remove asm from dependencies in pom
GraalJS >= 20.3.0 doesn't require org.ow2.asm as compile dependency anymore, see https://mvnrepository.com/artifact/org.graalvm.js/js/20.3.0.
* [jsscripting] Remove dependency org.graalvm.js/js-launcher as it is not required
js-launcher is GraalVM's JavaScript command line interpreter and not required in the addon.
See https://www.graalvm.org/22.1/reference-manual/js/RunOnJDK/.
* [jsscripting] Add missing com.ibm.icu dependency
GraalJS changelog says that it is not required for GraalJS >= 22.0.0 (see 685e5873af/CHANGELOG.md (version-2200)).
But GraalJS 22.3.0 attempts to load classes from it during runtime.
* [jsscripting] Update GraalJS engine options
Compat, as its additional functionality is not used by openhab-js and user code is not expected to use it.
* [jsscripting] Remove com.ibm.icu/icu4j dependency
* [jsscripting] Don't disable Nashorn compat mode as openhab-js requires it for accessors
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
When ipv6 is configured on the network, Chromecast devices will randomly
return ipv4 and/or multiple ipv6 addresses during mdns discovery.
This would trigger a thingUpdated call which will call dispose/initialize,
causing the thing to go offline/online.
Signed-off-by: Jimmy Tanagra <jcode@tanagra.id.au>
* Updated Discovery instructions for scenes and actuators
Updated Discovery instructions as after KLF200 is auto discovered and configured discovery of scenes and actuators need to be manually triggered.
* @jirikraus Updated Discovery instructions for scenes and actuators
Formatting update to address comment from @andrewfg.
* [homekit] support Rollershutter items for HoldPosition
just send STOP to them
* [homekit] log a warning for incompatible HoldPosition items
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [jsscriptingnashorn] JavaScript Scripting Nashorn Automation
This add-on allows you to use your older JavaScript (ECMAScript 5.1) rules on newer Java versions until they are migrated to JavaScript (ECMAScript 2021+).
The add-on uses a standalone [Nashorn Engine](https://github.com/openjdk/nashorn) which was part of Java until it was removed in Java 15.
* Update parent to 3.4.0-SNAPSHOT and nashorn-core to 15.4
For the Nashorn changelog, see:
https://github.com/openjdk/nashorn/blob/main/CHANGELOG.md
* Update parent to 4.0.0-SNAPSHOT
* Remove removeUnsupportedNashornArgs
* Update scriptTypes
* Add CODEOWNERS entry
* Recycle ScriptScopeOSGiTest.java
It got removed in openhab/openhab-core#2994
* Remove redundant new line from pom.xml
Signed-off-by: Wouter Born <github@maindrain.net>
* [nanoleaf] More robust caching of layout
This is a bugfix/enhancement to make sure the caching of the layout
(to save it from being recalculated) works better:
- Only save previous layout if indeed painted
- Only save layout from the layout update, not the display state
- Recalculate anyway if current state is null
* Bugfix: Update colors
When Stefan runs, the getBridge() returns null, when Jørgen runs, is doesn't. But it isn't needed, because we
are already in the handler, so just call own methods.
Improvement: Less draws when updating colors
Instead of drawing the picture for each panel (which gave a cool effect), draw only once when we have parsed all color data.
Signed-off-by: Jørgen Austvik <jaustvik@acm.org>
* [homekit] allow configuring secondary services as members of a group
Required introduction of AccessoryGroup to represent the base
AccessoryInformationService for ease of configuring multiple of the
same service.
This is also "breaking" in that someone who previously had HomeKit
accessories nested directly inside of a group that was itself a
HomeKit accessory will now have those items grouped within the Home
app.
* [homekit] combine multiple readme sections on complex accessories
Signed-off-by: Cody Cutrer <cody@cutrer.us>
A community member realized, that the used unit for rain-rate was wrong (https://community.openhab.org/t/fine-offset-weather-station-binding-discussion/134167/153)
Rain rate is measured in mm/h and so it is not a `VolumetricFlowRate` but a `Speed`.
Additionally, I added some details to the doc.
Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>
The documentation states incorrectly that "Hello, World!" is printed when instead "Hello world!" is printed.
Signed-off-by: Wouter Born <github@maindrain.net>
* Allow handling of QuantityType for color temperature channel
* Fixed log messages and reduce log level.
Signed-off-by: Christoph Weitkamp <github@christophweitkamp.de>
* [jdbc] Update org.xerial/sqlite-jdbc to 3.40.0.0
Co-authored-by: Jacob Laursen <jacob-github@vindvejr.dk>
Signed-off-by: Kai Takac <kai.takac@gmail.com>
Using these Markdown tweaks a small intro will show in Main UI instead of emptyness and a "more" button.
Signed-off-by: Wouter Born <github@maindrain.net>
* New translations knx.properties (German)
* New translations yamahamusiccast.properties (German)
* New translations hdpowerview.properties (Danish)
* New translations jsscripting.properties (Danish)
* New translations chromecast.properties (Italian)
* New translations sonos.properties (Italian)
* New translations exec.properties (Italian)
* New translations knx.properties (German)
* New translations jsscripting.properties (German)
* New translations yamahamusiccast.properties (German)
Slightly change wording of docs related to localSourceAddress to avoid
address conflicts during initial setup.
Add remark about knxd.
Fixes#13602.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Some add-ons use `---` separators which causes issues when rendering the documentation in Main UI.
Fixes#13953
Signed-off-by: Wouter Born <github@maindrain.net>
* [rrd4j] Error handling for broken rrd4j files
Catch exceptions thrown by getDB(..) and print the name of the affected
database file. This allows to identify a broken rrd4j file.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* Implement Authentication (WIP)
* Validation Code accepted
* Refactor session state
* RefreshClient working
* Implement session persistence in openhab store
* Integration in binding
* Remove persistent cookies, which break authentication
* Bugfixing
* Add code configuration to UI
* Improve documentation, error-handling and cleanup
* Rework auth order
* Rework auth process
* Add 2-FA-auth to documentation
* Set bridge to online if data refresh works
* Case-sensitive rename ICloudAPIResponseException
* Include authentication in refresh flow
* Fix regression for data not being updated
* Fix typo in i18n props
* Fix review and checkstyle.
* More javadoc, new RetryException
* Introduce @NonNullByDefault
* Introduce server for RetryException, add NonNullbyDefault, fix warnings
* Rework for contribution, e.g. null checks, ...
* Fix checkstyle
* Move JsonUtils to utilities package
* Async initialize bridge handler.
* Report Device OFFLINE if Bridge is OFFLINE
* Set bridge thing status to UNKOWN in init
* Move refresh init into async init
* Cancel init task in dispose
Also-by: Leo Siepel <leosiepel@gmail.com>
Signed-off-by: Simon Spielmann <simon.spielmann@gmx.de>
* [jsscripting] Extend synchronization to common ScriptEngine methods
This extends the multi-thread synchronization to "eval" and "invokeMethod" and moves synchronization for "invokeFunction" to the DelegatingScriptEngineWithInvocableAndAutocloseableAndSynchronization class. Fixes the multi-thread access requested warnings described in the community (https://community.openhab.org/t/openhab-3-4-milestone-discussion/138093/130) and related to https://github.com/openhab/openhab-core/pull/3180.
* Revert "[jsscripting] Extend synchronization to common ScriptEngine methods"
This reverts commit aadd21e45879c10aad29bf279ddbb0afd789b0aa.
* [jsscripting] Extend synchronization to common ScriptEngine methods & Switch to ReentrantLock
This extends the multi-thread synchronization to "eval" and "invokeMethod" and moves synchronization for "invokeFunction" to the InvocationInterceptingScriptEngineWithInvocableAndAutoCloseable class.
The synchronization mechanism changed from using synchronized to using a ReentrantLock together with catch_finally to avoid having deadlocks when an exception is thrown.
Fixes the multi-thread access requested warnings described in the community (https://community.openhab.org/t/openhab-3-4-milestone-discussion/138093/130) and related to https://github.com/openhab/openhab-core/pull/3180.
* [jsscripting] Reduce compiler warnings
* [jsscripting] Replace finally blocks & Wrap returns in afterInvocation
* [jsscripting] Fix deadlock caused by NoSuchMethodException in Invocable interface methods
During testing my latest changes, I noticed that there is a deadlock when invokeFunction or invokeMethod are called on a non-existing method.
This happens because the NoSuchMethodException keeps afterInvocation from running and therefore the lock never gets released.
* [jsscripting] Also rethrow NPE & Fix PMD warnings/errors
* [jsscripting] Wrap and rethrow other exceptions instead of returning them
* [jsscripting] Address review comment from @jpg0
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* New translations boschshc.properties (Italian)
* New translations ecowatt.properties (French)
* New translations nikohomecontrol.properties (Dutch)
* New translations systeminfo.properties (Dutch)
* New translations upnpcontrol.properties (Dutch)
* [nanoleaf] More color for less network calls
This is a refactoring that moves the "get panel color" out of the
panel handler and into a separate class, with callbacks.
This makes us do only one REST call to get colors instead of one per
panel that is a thing. It also lets us retrieve colors for all panels -
also those that doesn't have a thing in OpenHAB,
While testing this out, I found a bug where solid colors set in the app
wasn't reflected in neither the controller nor panel channels, and that
should also be fixed now.
Signed-off-by: Jørgen Austvik <jaustvik@acm.org>
* [homekit] delay starting until a particular StartLevel
instead of a blind "delay by seconds", the new default won't even
attempt to start until items are loaded (both file-based and UI-based),
with an additional config to let the user delay it any further (in
case they have items coming from JSR223 scripts that can't run until
at least SL20 anyway).
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [knx] Improve handling of serial gateways
Take over initialization logic from KNX IP gateway for serial gateway.
Properly re-initialize serial gateway after configuration changes done in UI.
Fixes#13892.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* State descriptions cleanup
* Converted channels to QuantityType, adjusted default translations
* Channel definitions and percent to QuanityType
* Changed default state descriptions from MB to MiB
Signed-off-by: Mark Herwege <mark.herwege@telenet.be>
* Add smoke detector service and add it to twinguard handler
* Add handler for smoke detector
* Support for smoke detector
added smoke detector device with SmokeDetectorCheckService
added SmokeDetectorCheckService to TwinguardHandler
added tests for smoke detector code
updated smoke detector code to latest boschshc version after cherry-picks of initial code from Christian Oeing
* re-generate i18n file, refactoring of smoke detector code to use abstract base classes
* Fix typos
* Add unit test for PlayPauseType commands
* Add unit test for SmokeDetectorCheckState
* Re-add null annotation
* Fix warning
Signed-off-by: Christian Oeing <christian.oeing@slashgames.org>
Signed-off-by: Gerd Zanker <gerd.zanker@web.de>
Signed-off-by: David Pace <dev@davidpace.de>
* [homekit] add BasicFan accessory
This is Fan v1. It's a subset of FanV2, except that Home allows you
to customize the icon to show a ceiling fan.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
just the sub-commands.
since the show command is already a "search", I didn't feel it's super
important to implement on that
Signed-off-by: Cody Cutrer <cody@cutrer.us>
Lines is a Nanoleaf shape we haven't been able to test earlier.
Now we have tested them, and added support for painting them as well.
They do unfortunately not support touch gestures.
Signed-off-by: Jørgen Austvik <jaustvik@acm.org>
* Update I/O Linc Documentation
The I/O Linc has a feature to match or invert the status of the contact with its control messages. The binding was written expecting the messages to be inverted. This is the opposite of how insteon recommends setting up the garage kit, and not described well by the original "Note" at the bottom of the section. Updated the instructions to specify the input is OFF when linking, and changed the note to better describe what happens if you don't. All based off of my own experience with the sensor: https://community.openhab.org/t/insteon-io-linc-garage-door-contact-slow-update/141469
* Nanoleaf Visual State fix
Fix the visual state channel name.
Also:
- Better name (from state to visual state) of the (new) channel
- Better logs which has helped us debug the problem
- Some more information on when it will work in the README
Signed-off-by: Jørgen Austvik <jaustvik@acm.org>
* [homekit] persist all known accessories, to prevent loss of homekit information
See the readme for more details, but basically this keeps track of every
accessory we've ever created, and if it no longer exists, presents a dummy
accessory instead. If the accessory comes back, nothing is lost in the Home
app; if you meant to prune it permanently, you have to run a console command.
there are also several fixes to prevent presenting the device with missing data -
such as when the bundle stops, _don't_ explicitly remove the accessories until
the server has stopped.
we also don't increment the configuration version unless the configuration
has _actually_ changed (so removing and re-adding the exact same thing
won't trigger the device to reconnect). this even works across restarts
of the bundle, because we're persisting all the accessory information
for dummy information anyway.
* [homekit] Address review comments for accessory persistence
* update hap-java to 2.0.4
* remove unused local variable
* [homekit] ensure accessories are replaced in a batch
so that HAP-Java can maintain subscriptions with the new objects
* [homekit] log individual dummy accessories up to 5
* [homekit] Tweak readme for dummy accessories slightly.
* Be consistent with proper usage of useDummyAccessories.
* Make the sentence more clear about the effects of having dummy accessories.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* Added Constructor parameter to pass custom ScheduledExecutorService, that allows deterministic execution in test cases.
* Fixed some codestyles.
Signed-off-by: Sönke Küper <soenkekueper@gmx.de>
In recent PR #13824, I added closing the context when the engine is closed, but core seems to have problems with that.
It logs: "[ERROR] [ipt.internal.ScriptEngineManagerImpl] - Error removing ScriptEngine
java.lang.IllegalStateException: The Context is already closed."
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
To mitigate issue https://github.com/openhab/openhab-core/issues/3125
(common thread pool exhaustion when combining parallel streams with
synchronization or locks)
Signed-off-by: Sami Salonen <ssalonen@gmail.com>
The alternative MIME type text/javascript is also used by Nashorn, therefore we add the same extension as for the main MIME type.
The alias is introduced to simplify the usage in SCRIPT transformation profiles.
* Fix syntax problems in the bndtools file
* Add null check to avoid potential NPE
In some cases during testing, a NPE occured, this should solve it.
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* First commit on newly created branch, taking code from c8b8e210dfd23f98526763782eadbca49509baf9
* [bondhome] update snapshot version, and some typos
* [bondhome] Address (most) comments from prior review from #7260
* [bondhome] simplify channels
* lastUpdate is unnecessary; turn on persistence or add a rule on update if
you care to keep track of it
* use a single string command channel for all shoot-and-forget commands, instead
of multiple switch channels
* use a rollershutter channel for shades (accepting UP, DOWN, STOP, 0%, and 100%)
* on all dimmer channels, accept ON and OFF, as well as 0% to imply OFF, instead
of having to write rules to control ON/OFF state separately.
* if the dimmer channel exists, prune the corresponding power channel, since
the dimmer channel is now a pure superset of its functionality
* overload fan#speed to be ceiling fan or a fireplace's fan, depending on the
device type
* [bondhome] add bundle to the BOM pom
* [bondhome] clean up BondDeviceHandler a bit
* there's no need to delay initialization; ThingManager won't
even attempt to initialize a child thing until its bridge is online
* Remove some extra initialization checks that can never be false
* slightly refactor some methods to return early, rather than
nest a giant `else`
* remove some info logging that will get triggered in normal usage
* [bondhome] fix bridge discovery
* Bridge property and config serial number need to be the same name
* Don't arbitrarily delay the BPUPListener
* Automatically update the IP if the BPUPListener finds it
* Provide the new bridge with its discovered IP to avoid an additional
DNS query
* Don't get the bridge version after every keep-alive response
* [bondhome] trigger end-device discovery as soon as the bridge comes online
* [bondhome] remove internal binding version
* [bondhome] change addr property to string
Certain values seen in the wild when interpreted as a long are too big for that
storage. Also, the Bond API documentation describes the addr property on a
device to be a string.
OpenHAB already has infrastructure to have things update their
channel definitions when a binding is updated.
* [bondhome] ignore any device that starts with _
In v3 of their API, Bond added a new special entry of __. Because no valid
device id would start with an underscore, ignore everything that starts with an
underscore to fix v3 and maybe futureproof.
* address review comments
mostly adding i18n to error states, and cleaning up error handling of
HTTP requests.
* use builtin translation services
instead of plumbing our own provider through
* use System.nanoTime instead of currentTimeMillis
so that it will be a monotonic clock, not (as) susceptible to the clock
changing
* [bondhome] ignore BPUP messasges that aren't state
In recent firmware, bond is now sending action messages via BPUP as well as state.
This change ignores all messages that aren't state.
* [bondhome] Improve error handling, and remove dummy constants
Just use a single BondException class to communicate any sort of
error from within bond, and avoid throwing, catching, and re-throwing
the same (or slightly modified) exception.
Also remove dummy constants that might give the wrong impression
of the details of your Bond device. Then implement proper null checks,
especially setting a configuration error if key config properties
aren't set on the thing.
* [bondhome] avoid setting device status when bridge just went offline
* address static analysis tool problems
Also-by: Sara Damiano <sdamiano@stroudcenter.org>
Also-by: Keith T. Garner <kgarner@kgarner.com>
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* New translations miele.properties (Danish)
* New translations jruby.properties (Italian)
* New translations ecowatt.properties (Italian)
* New translations webexteams.properties (Italian)
* [openwebnet] first changes for Alarm support
* [openwebnet] added first version Alarm handler
* [openwebnet] added ownIdTest for Alarm
* [openwebnet] added things def for Alarm and discovery for alarm zone
* [openwebnet] refreshDevice
* [openwebnet] fix text formatting
* [openwebnet] fixes
* [openwebnet] added other alarm channels
* [openwebnet] Alarm: codestyle and null checks
* [openwebnet] updated Alarm examples in README and some cleanup
* [openwebnet] changed zone channel from armed to state, cleaned README
Signed-off-by: Massimo Valla <mvcode00@gmail.com>
* Added #13493 Plus 1/1PM addon support; Fixed#13515 pos for roller in
open/close state; various null warnings removed; README updated
Signed-off-by: Markus Michels <markus7017@gmail.com>
* digitalInput, analogInput and voltage added for Add-On; README updated
Signed-off-by: Markus Michels <markus7017@gmail.com>
* shelly2-roller re-added (wrong assumption that Shelly 2 doesn't support
roller mode, because it has no power meter)
Signed-off-by: markus7017 <markus7017@gmail.com>
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Initialization for Californium 2.7.3 fixed (no multicast packets where
received)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Analogous input support for Plus Addon changed; Allterco made a format
change in the beta firmware
Signed-off-by: Markus Michels <markus7017@gmail.com>
* changes applied
Signed-off-by: Markus Michels <markus7017@gmail.com>
* README updated; Shelly Plus addon handling adjusted to latest firmware
(before was beta)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Update bundles/org.openhab.binding.shelly/README.md
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
* fix JSON for Shelly1 - ext_switch_enable is a boolean, not an int
Signed-off-by: Markus Michels <markus7017@gmail.com>
Signed-off-by: Markus Michels <markus7017@gmail.com>
Signed-off-by: markus7017 <markus7017@gmail.com>
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
Co-authored-by: Fabian Wolter <github@fabian-wolter.de>
* [jrubyscripting] implement dependency tracking
watchers had to be refactored similar to jsscripting.
it supports watching any directory referenced from RUBYLIB,
as well as the gem home. it properly excludes lib and gem home
(as well as other gem homes if you have multiple jruby versions
installed) from loading as regular scripts.
this is a breaking change if you don't have RUBYLIB explicitly
configured, and you are using the old default directory.
it's expected that the detection of what files and gems any
given script uses will be self-identified by the script, presumably
by the helper library.
JRubyScriptEngineConfiguration was largely refactored as part of this.
* CONFIGURATION_PARAMETERS was renamed, and is no longer static, since
it's modified every time the configuration is changed
* OptionalConfigurationElement was simplified since default values
are always provided now. this also simplified lots of other code
that accesses the current settings.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [smsmodem] Initial contribution
This binding connects to a USB serial GSM modem (or a network exposed one, a.k.a ser2net) and allows openHAB to send and receive SMS through it.
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] README fix
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] build/spotless fix
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] compliance with 3rd party license
And long running thread naming convention
And treated some code warning
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] i18n
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] Small fixes
update channel
rename action to avoid colision with other binding and a too generic name
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] Use of standard Thing properties
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] Fix sender identifier error with special character
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] Add encoding parameter
For non latin character in SMS
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] Apply review
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] Split local and remote modem in two thing-types
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] Apply review
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] Apply review
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [smsmodem] Apply code review (removing unnecessary method)
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
Co-authored-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [homematic] Fix min/max values for rollershutters
For dimmers, the 1.0 max value sent by CCU was already converted to
percent values in the item state description. Do the same thing also for
roller shutters.
Signed-off-by: Danny Baumann <dannybaumann@web.de>
* [jsscripting] Fix memory-leak caused by com.oracle.truffle.host.HostObject
Fixes this memory leak by making the HostAccess for the GraalJSScriptEngine available in a static final variable instead of creating it for each new engine.
Solution proposed in https://github.com/oracle/graaljs/issues/121#issuecomment-690179954.
Sharing a single engine across all Contexts (as proposed in https://github.com/oracle/graaljs/issues/121#issuecomment-880056648) is not possible, because core expects a ScriptEngine.
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* [jsscripting] Update JavaDoc
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* [jsscripting] Close `GraalJSScriptEngine` when `OpenhabGraalJSScriptEngine` is closed
My breakpoint inside the close method of GraalJSScriptEngine did not trigger until this change was made.
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* [miio] add support zhimi.airp.cpa4 WIP
* [miio] add support Xiaomi Smart Air Purifier 4 Compact
Adding support for the following models:
* Xiaomi Smart Air Purifier 4 Compact (modelId: zhimi.airp.cpa4)
Minor typo fixing (note: no breaking channel changes)
close: #13763
Signed-off-by: Marcel Verpaalen <marcel@verpaalen.com>
* [Nanoleaf] New Channel: State
Shows an image of the state of the panels with color.
Also makes the layout slightly prettier. This is less functional than the layout, and more eyecandy.
Signed-off-by: Jørgen Austvik <jaustvik@acm.org>
* [wundergroundupdatereceiver] LAST_QUERY parameter should not be mapped automatically
* [wundergroundupdatereceiver] All channeltype props need to be applied
Especially the channel kind
* [wundergroundupdatereceiver] Remove illegal characters from channel name
Additionally expand the channel naming test to assert the generated channelUID and test that _ in names isn't inadvertently replaced
* [wundergroundupdatereceiver] Don't default AutoUpdatePolicy on creation
* [wundergroundupdatereceiver] Migrate changed channel to trigger type
Signed-off-by: Daniel Demus <daniel-github@demus.dk>
Setting senderId for MSC RORG and set rorg to Unknown when there is no
mach with the supported(handled) RORG types.
Fixes#13786
Signed-off-by: Zhivka Dimova <zhivka.dimova@myforest.net>
* [miio] cloud login issues improvement
* Small change in debug loggin is login issues are expected
* Additional trouble shooting steps in readme
* Fix duplicate name in device list preventing readme maker running
* Catch a json exception in readme maker
close#13611close#7459
* [miio] fix strange/foreign characters in readme
Signed-off-by: Marcel Verpaalen <marcel@verpaalen.com>
* [mqtt.espmilight] Automatically convert color values to color temp for RGB+CCT bulbs
Yes, it's lots of math, but references are provided. This supplants
whiteThreshold for RGB+CCT bulbs since it is far more flexible and
accurate.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* Abort migration from real names when most tables have table name prefix
* Add missing checks for database connection from console commands
* Add additional documentation for check/fix schema
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
otherwise if your step is 1.0 in fahrenheit, then your
values will get rounded to 1.0 celsius, and you might not
even notice you've lost precision in the Home app.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [evcc] Extend accepted command types
* [evcc] Convert QuantityType commands to required units
* [evcc] Allow evcc URL to end with a slash
Should fix an issue on the forum, where a user sent a command of DecimalType, but the binding expected a QuantityType.
See https://community.openhab.org/t/evcc-binding-electric-vehicle-charging-control/135209/15.
The accepted command types are extended for all channels if possible.
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* Add console command for checking schema integrity
* Remove unneeded logging
* Add console command for fixing schema integrity
* Provide documentation
* Try to add support for Derby and PostgreSQL
* Sort alphabetically by item name
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
Since JUnit Jupiter test classes and methods do not need to be `public`.
It is recommended to omit the `public` modifier.
See https://junit.org/junit5/docs/current/user-guide/#writing-tests-classes-and-methods
"Class and method visibility
Test classes, test methods, and lifecycle methods are not required to be
`public`, but they must not be `private`.
It is generally recommended to omit the `public` modifier for test
classes, test methods, and lifecycle methods unless there is a technical
reason for doing so (...)"
Signed-off-by: Thomas Traude <t-riggs@gmx.net>
* Fix never ending WARN when HIK camera does not support alarm inputs.
* Streamline code.
* Update Instar support for 2k+ Generation.
* Fix alarm codes.
* Add CHANNEL_LAST_EVENT_DATA
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* [miio] add support Xiaomi Smart Air Purifier 4 (modelId: zhimi.airp.mb5)
Adding support for the following models:
* Xiaomi Smart Air Purifier 4 (modelId: zhimi.airp.mb5)
Signed-off-by: Marcel Verpaalen <marcel@verpaalen.com>
* [boschshc] Support smart light bulbs (#13707)
* add thing type definition for smart bulbs using system channels
* add constants for thing type and channels
* implement and register handler
* implement binary switch service (to switch on/off)
* implement multi-level switch service (allows to get/set brightness
from 0-100%)
* implement service to get and set colors
* add unit tests for handler and state classes
- update documentation
Signed-off-by: David Pace <dev@davidpace.de>
* [jsscripting] Refactor ThreadsafeTimers to create futures inline instead of in an extra methods
* [jsscripting] Introduce utility class for providing easy access to script services
* [jsscripting] Reimplement timer creation methods from ScriptExecution for thread-safety
* [jsscripting] Add missing JavaDoc for reimplement timer creation methods
* [jsscripting] Remove the future from the map when setTimeout expires
* [jsscripting] Rename `GraalJSScriptServiceUtil` to `JSScriptServiceUtil`
* [jsscripting] Remove the `createTimerWithArgument` method
* [jsscripting] Replace the OSGi workaround of `JSScriptServiceUtil` with an injection mechanism
* [jsscripting] Use constructor to inject `JSScriptServiceUtil` into `GraalJSScriptEngineFactory`
* [jsscripting] Minor improvements by @J-N-K (#1)
* [jsscripting] Minor changes related to last commit to keep flexibility of `JSRuntimeFeatures`
* [jsscripting] Upgrade openhab-js to v2.1.1
* [jsscripting] Remove unused code
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
Co-authored-by: Jan N. Klug <github@klug.nrw>
This fixed the maven build, that fails because webpack-cli version 5.0.0 doesn’t properly process the given entrypoint.
Instead, webpack tries to use the entrypoint from openhab-js‘ webpack config file.
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* Fix compiler info
Unsafe interpretation of method return type as '@NonNull' based on the receiver type 'java.util.Enumeration<java.net.@NonNull NetworkInterface>'. Type 'java.util.Enumeration<E>' doesn't seem to be designed with null type annotations in mind
* Improve robustness of job rescheduling and handler disposal
Handler tried updating thing although the handler was already disposed
Fixes#13701
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Add warning about using tableCaseSensitiveItemNames without dedicated schema
* Move warning to extended description
* Rephrase explanation
* Fix commands
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
The majority of brightness channels were already converted to dimmer.
This PR applies same to the 'other'brightness channels like nightlight
and/or ambient
close: #9936
Signed-off-by: Marcel Verpaalen <marcel@verpaalen.com>
* Enable wrapped exceptions being thrown by Yank
Fixes#13718
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Fix SAT warning about hashCode implementation
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [jsscripting] Downgrade GraalVM to fix issue with armv7l & OpenJDK 11.0.16
The community reported several cases where JS Scripting was not working due to some issue with the injection of the global script.
This issue seems to only occur on armv7l (e.g. Raspberry Pi 32bit) and OpenJDK 11.0.16.
Investigation showed that the occurrence of the problem depends on the GraalJS version.
See https://community.openhab.org/t/js-scripting-all-scripts-stop-working-when-upgrading-to-3-4-0-m4/140837.
* [jsscripting] Add logging for injection of JSRuntimeFeatures
* [jsscripting] Lint `@jsscripting-globals.js` with semistandard
* [jsscripting] Remove ICU4J as it moved to `org.graalvm.truffle`
Reference f5661d4655/CHANGELOG.md (version-2200).
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* [evcc] Change DTO from double to float as the higher precision is not required
* [evcc] Change DTO from int/long to float
* [evcc] Update JavaDoc & small improvements
* [evcc] `EvccHandler`: Add exception message to the debug log
Fixes https://github.com/openhab/openhab-addons/issues/13646.
Avoids problems with changed data types in the future by generally using float instead of int.
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* Visualize Nanoleaf layout
* Only calculate image if channel is linked
* White background image
* Render more shapes
Signed-off-by: Jørgen Austvik <jaustvik@acm.org>
* Add zone actions for rules
* Don't scan for NuvoNet source messages if openHAB NuvoNet sources are not being used
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Add console command for listing tables
* Query row counts only when needed and while generating output
* Add cleanup command
* Add documentation
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
This change adds support for obtaining the battery state for the
following devices:
* Motion Detector
* Thermostat
* Twinguard
* Wall Thermostat
* Window/Door Contact
The following changes were made:
* Add system.battery-level and system.low-battery channels to Motion
Detector, Thermostat, Twinguard, Wall Thermostat and Window/Door Contact
* Add constant for battery-level and low-battery channels in
BoschSHCBindingConstants
* Implement abstract handler and service for battery-powered devices
* Let appropriate devices inherit the abstract implementation
* Add missing super calls in initializeServices() methods
* Rename existing getServiceURL() to getServiceStateURL() in HTTP client
* Add methods to retrieve service states without the suffix "/state" in
the URL
* Rename DeviceStatusUpdate to DeviceServiceData
* Let DeviceServiceData extend BoschSHCServiceState
* Extend DeviceServiceData DTO with model for faults
* Enhance bridge handler: handle updates without state sub-objects,
extract methods to enhance readability
* Add unit tests for all affected devices
* Minor code enhancements
* Update documentation
Signed-off-by: David Pace <dev@davidpace.de>
* Upgrade commons-text to 1.10.0 (prevents CVE-2022-42889)
* Upgrade commons-lang3 to 3.12.0
* Remove commons-text, wrap from feature because it is embedded into the bundle
Signed-off-by: Wouter Born <github@maindrain.net>
* [mqtt.homeassistant] support non-RGB lights
dynamically decide which type of channel to expose. also send "down-typed"
commands to the proper topic. this also sets the groundwork for supporting
template and JSON schemas
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [tellstick] Avoid updates duplication after communication errors
Fix#13453
Do not register the same device handler many times as listener in the bridge handler
Unregister the device handler from the bridge handler when disposing device handler
HTTP timeout set to 15s
Remove the retry mechanism related to the timeout
Check HTTP status code
Fix discovery service unregistration
Log statistics about request/refresh durations and number of timeouts/errors
Change logging in case of exception
Also change few logs level (remove usage of logger.error)
Execute one refresh at bridge initialization and not 2
Small enhancement of the bridge/things status management
implement discovery service unregistration
Fix few code analysis findings
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* Use a set for deviceStatusListeners to avoid duplications
Review comment: @NonNullByDefault for TellstickHandlerFactory
Review comment: use ThingStatusDetail.CONFIGURATION_ERROR if no bridge
is defined
Review comment: use 1_000_000 instead of 1000000
Review comment: use Instant instead of LocalDateTime
Review comment: Thread.currentThread().interrupt()
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* [jsscripting] Reimplement timers to conform standard JS
* [jsscripting] Name scheduled jobs by loggerName + id
* [jsscripting] Update timer identifiers
* [jsscripting] Update identifiers for scheduled jobs
* [jsscripting] Synchronize method that is called when the script is reloaded
* [jsscripting] Cancel all scheduled jobs when the engine is closed
* [jsscripting] Ensure that a timerId is never reused by a subsequent call & Use long primitive type instead of Integer
* [jsscripting] Use an abstraction class to inject features into the JS runtime
* [jsscripting] Make ThreadsafeTimers threadsafe for concurrent access to the class itself
* [jsscripting] Move the locking for `invokeFunction` to `OpenhabGraalJSScriptEngine`
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
Avoid registering several times the same device status listener.
It is called by the thing handler each time the bridge status changed to ONLINE.
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* [kostalinverter] Fix for the Kostal inverter binding to work with
different firmware releases regarded to PIKO 10-20 Version 221004
This is the next version regarded to Closed PR #13464
* [kostalinverter] Changes done 20221019
Regarded to Thread.....
* Proper handling of InterruptedException
Also removbe a useless call to return
Signed-off-by: Örjan Backsell <orjan.backsell@gmail.com>
Co-authored-by: Laurent Garnier <lg.hc@free.fr>
* Do not append number when using real item names
* Extract getTableName to separate class
* Add initial test coverage
* Extract migration logic to separate class
* Support migration from real names back to numbered
* Simplify zero-padding
* Fix NullPointerException
* Fix MySQL compatibility when CLIENT_MULTI_STATEMENTS option is not set
* Add option for case sensitive table names
* Add real name with suffix mode for backwards compatibility
* Remove real name in lower case without suffix mode
* Map directly from item name to table name
* Fix ambiguous table name scenario
* Add additional testcase
* Add migration path for changed table prefix
* Drop items table when using direct mapping
* Add configuration note
* Fix table alignment
* Extend description as more migration paths are now supported
* Do not stop halfway through a migration
* For clarity, do not use abbreviation for operating system
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Fixes#13640
Working with multiple Paradox panels
Tested with:
- rename things files;
- thing disable / enable on same instance of OpenHab;
- disable on one OpenHab instance > enable on other;
Everything works as espected.
All test passed even if no Login/Logout commands were sent to IP module
Signed-off-by: Silviu Chingaru <silviuchingaru@yahoo.com>
* Extract nested DTO's to separate classes
* Rename api to dto
* Move test classes into internal
* Finish moving of files and fix namespaces
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [linuxinput] handle keys not known by libevdev
Previously if libevdev could not resolve a numeric event code to a
symbolic name the name "null" was used.
This is useless for the user and may lead to duplicate-channel errors if
multiple unknown keys are encountered.
Instead use the numeric code itself as channel name if no symbolic code
could be determined.
Reported-in: https://community.openhab.org/t/linuxinput-binding-and-mouse-capture/122612/8
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
* [linuxinput] add channel description
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
* add thing definition with ID "smart-plug-compact"
* add constant for thing type UID
* extract abstract implementation for devices with power switch and
energy monitoring
* let in-wall switch handler and smart plug handler extend the abstract
implementation
* register new handler
* add method with boolean parameter to fetch initial state actively
* make BoschSHCDeviceHandler abstract
* add documentation
* add unit tests
closes#13528
Signed-off-by: David Pace <dev@davidpace.de>
* Fix scheduling of thing and token update, tries to avoid service rate limiting. Added more logging. Added some missing null checks. Ensure recent data is fetched, not data from yesterday
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Updated to latest versio of API lib
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Added new channel waterconsumption_since_midnight that sums todays water consumption (same as in the Grohe app)
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Add more debug logging
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* More null checks, also set channels to Undef if a value is missing
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Fixed missing embedding of commons-text as it is a dependency of the api lib
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Refresh token 1 hour before expiry
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Re-login in case token refresh fails
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Factor in timezone when calculating consum since midnight
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Use QuantityType<Volume> for water consumption
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Minor
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* i18n of dynamic error messages
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* More i18n. Plus retry of failed refresh token - with a delay to possibly avoid rate limiting
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Adjust refresh token timeout to 5 minutes before expire. Also retry with username/pwd login if token login fails (could be an expired token)
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Clear old discovery results
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Fetch data further back to ensure battery device has been online
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Updated README with old data warning
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Typo
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Do not allow polling interval less than 900 as rate limiting most likely will block the calls
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Fix failed token refresh giving up
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Removed refresh token login webpage. Another attempt at handling token refresh
Signed-off-by: Arne Seime <arne.seime@gmail.com>
* Fix status detail
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Restore formatting
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Fix newly introduced warnings
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Remove redundant logging
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
Signed-off-by: Arne Seime <arne.seime@gmail.com>
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
Co-authored-by: Jacob Laursen <jacob-github@vindvejr.dk>
So that other pieces of openhab can know what unit it's going to be,
without it having a value yet. Importantly, any necessary conversion
that need to be applied to the other portion of the state description -
min, max, and step.
See also https://github.com/openhab/openhab-core/pull/3132
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [jsscripting] Share the lock mechanism that was used only for rules
This change moves the lock object that was originally created for ThreadsafeSimpleRuleDelegate to OpenhabGraalJSScriptEngine to make share it across the whole engine.
* [jsscripting] Inject the lock object into the JS runtime
* [jsscripting] Update `setTimeout` & `setInterval` polyfills to enable threadsafety
* [jsscripting] Upgrade GraalJS from 21.3.0 to 22.3.0
* [jsscripting] Reduce compiler warnings
* [jsscripting] Update node version of frontend-maven-plugin
Signed-off-by: Florian Hotze <florianh_dev@icloud.com>
* Changed discovery to MDNS; added HTTPS handling; refactor HTTPClient to use jetty shared client
Signed-off-by: Christoph Weitkamp <github@christophweitkamp.de>
* [homekit] increase flexibility of ColorTemperature
allow Number or Dimmer items, and mired or Kelvin units.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [homekit] Improve output of console's `homekit show` command
* include the full JSON from all the characteristics, so you can confirm
everything is configured correctly.
* only use simple class names; the fully qualified package is just a
distraction.
* show linked services if they exist
* include the class name of services, not just the GUID
Signed-off-by: Cody Cutrer <cody@cutrer.us>
If you have many instances, it can take a while. So stop all the
instances in parallel. Also, fix a race condition where the update
debouncer might get called again after being stopped, because the
change listener was deregistered _after_ the debouncer was stopped.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* Options to control polling frequency and sleep mode
* Update documentation
* Fix request token expiration calculation and additional logging for tokens
Signed-off-by: Bill Forsyth <git@billforsyth.net>
* New translations airquality.properties (Italian)
* New translations airq.properties (Italian)
* New translations airvisualnode.properties (Italian)
* New translations androiddebugbridge.properties (Italian)
* [unifi] Fix PoE port mode for 24V
The value UniFi expects is actually pasv24. Tested with different UniFi controller versions.
* [unifi] Added Hilbrand as codeowner to UniFi binding
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* [knx] Improve localization
- introduce localization of error messages
- add new strings for common exceptions
- provide helper functions for translation
- add test cases
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* [homekit] fix BooleanItemReader to work with DimmerItems
DimmerItems have a PercentType state, which is easily convertible
to OnOffType, but is not inherited from it. So take that into account.
i.e. a variable speed fan can use a single DimmerItem for both
ActiveStatus and RotationSpeed.
* [homekit] Document that Dimmer is a possible item type for several booleans
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [homekit] allow configuring maxValue on VOCDensity
the default of 1000 is quite low in reality. tested and confirmed
working with iOS 16
* [homekit] allow step value to be configured for VOCDensity
Signed-off-by: Cody Cutrer <cody@cutrer.us>
According to the add-on documentation the Derby driver is included which was no longer the case.
The derby version was also changed because 10.16.1.1 is for Java 17+.
Signed-off-by: Wouter Born <github@maindrain.net>
this helps to auto-configure if the binding is providing the necessary info
metadata config still overrides
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* New translations ambientweather.properties (Italian)
* New translations amazonechocontrol.properties (Italian)
* New translations jpa.properties (Italian)
* New translations openwebnet.properties (Italian)
* [linky] Avoid internal server error (getting power peak early in the morning)
Fix#13377
The binding now requests power peak data for 2 days (yesterday and the day before).
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
HASS registers availability topics before calling start(), so
the AbstractMQTTThingHandler was never subscribing/starting the
availability channel(s). So do so in start() of the base class.
I checked other implementations, and either they already handle
re-registering availabilityTopics in their start()
(GenericMQTTThingHandler), or they don't use availabilityTopics
at all from the base class and manage it themselves (Homie).
Note that this shows up as newly-added HASS things not having
a problem (because the components aren't discovered until after
the ThingHandler is started), but if you restart OpenHAB or
disable/enable the thing, the channels (and components) are
cached, thus how availabilityTopics are known before starting.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* Buffer last event requests per child modules
This is targetted to decrease the number of requests transmitted to Netatmo API.
Solves #13358
Signed-off-by: clinique <gael@lhopital.org>
* [openwebnet] added first support for WHO=0 scenarios
* [openwebnet] channels indent
* [openwebnet] formatting
* [openwebnet] set WHO=0 thing online automatically. Update to openwebnet4j 0.9.0
Signed-off-by: Massimo Valla <mvcode00@gmail.com>
* [SunSpec] Added missing InverterStatus
See e.g., https://github.com/sunspec/models/blob/master/json/model_101.json#L307
* [SunSpec] Added Channel for Vendor Specific Status
* [SunSpec] Fixing two old TODOs
VA and VAR are defined as alternate unit for WATT so no breaking change.
Signed-off-by: Andreas Lanz <alanz@gmx.de>
* Plus/Pro support and some refactoring, bugfixes
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Review changes applied
Signed-off-by: Markus Michels <markus7017@gmail.com>
* review changes
Signed-off-by: Markus Michels <markus7017@gmail.com>
Signed-off-by: Markus Michels <markus7017@gmail.com>
* New translations influxdb.properties (French)
* New translations tado.properties (Italian)
* New translations ecowatt.properties (Italian)
* New translations solarmax.properties (Italian)
* [unifi] Set PoE thing offline if no data could be found
This would better reflect the PoE thing status if there is a problem with either the data from the api or a configuration problem (like invalid port number).
* [unifi] Fix bug to detect PoE ports when first port is not PoE port
The binding assumed either all ports or no ports were PoE, and asssumed if port 0 was not PoE none was PoE.
However, some switches have ports starting at port 5 to be PoE. Therefor changed code to just test each port if it is PoE.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* Removed warning shown when thing is created with hexadecimal warning for read-only things
* Added missing configuration parameters into documentation
Signed-off-by: Jan Vybíral <jan.vybiral1@gmail.com>
* New translations openweathermap.properties (French)
* New translations openuv.properties (French)
* New translations openhabcloud.properties (French)
* New translations ecowatt.properties (French)
Changes:
Fix: Now using KTOR instead of building the url by simple string concad. This fixes the https and port 443 bug that existed prier to this change. (https://example.com would look like: https://example.com:443)
Added: Support for jellyfins Base URL option. This allows the addon to be used on installations were jellyfin uses a base path.
Signed-off-by: tliese <mail@tobiasliese.me>
* Correcting issue by late loading of the capability.
* Handle MAXIMUM_USAGE_REACHED at ApiBridgeHandler level.
Signed-off-by: clinique <gael@lhopital.org>
pass the actual class objects through, and post-process in Ruby, to
avoid the rescue nil -- and by extension, any issues with visibility
into private objects from JRuby.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
The tapocontrol plugin uses a static UUID which is now causing a an API rate limit exceeded error from the TP-Link API. This commit generates a separate UUID for every login attempt.
Signed-off-by: Peter Hicks <peter.hicks@opentraintimes.com>
* New translations openwebnet.properties (German)
* New translations sonos.properties (German)
* New translations openhabcloud.properties (German)
* New translations hueemulation.properties (German)
* New translations epsonprojector.properties (German)
* New translations hpprinter.properties (German)
* New translations http.properties (German)
* New translations knx.properties (German)
* New translations lcn.properties (German)
* New translations magentatv.properties (German)
* New translations onkyo.properties (German)
* New translations fineoffsetweatherstation.properties (German)
* New translations openweathermap.properties (German)
Range is 0..255, not 0..250.
rgb -> hsv -> rgb still isn't perfect, but it's better. In
particular, I found this when using HSBType.BLUE in a test,
and it was coming out as 0,0,250 in RGB. It now comes out as
a proper 0,0,255.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
this is a theme, and I've extracted a helper method and applied it to several
other locations as well
example, I have a double-sliding door, with two contact sensors
in the alarm system, defined as:
```
Group:Contact:AND(CLOSED,OPEN) DeckDoor_Contact "Deck Door [%s]" <door> (gExteriorDoors, gWarningVisibility_Contact, gDoor, lMainFloor, gInflux) { homekit="ContactSensor" [instance=2] }
Contact DeckNDoor_Contact "Deck Door North" <door> (gInflux, DeckDoor_Contact, gGreatContacts) { channel="dscalarm:zone:46c52f35:zone11:zone_status" }
Switch DeckNDoor_Tamper "Deck Door North Tamper [%s]" <warning> (gTamper, gWarningVisibility_Switch) { channel="dscalarm:zone:46c52f35:zone11:zone_tamper" }
Contact DeckSDoor_Contact "Deck Door South" <door> (gInflux, DeckDoor_Contact, gGreatContacts) { channel="dscalarm:zone:46c52f35:zone12:zone_status" }
Switch DeckSDoor_Tamper "Deck Door South Tamper [%s]" <warning> (gTamper, gWarningVisibility_Switch) { channel="dscalarm:zone:46c52f35:zone12:zone_tamper" }
```
This allows the Group:Contact to be used for the ContactSensor.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [KVV] Replace underlying API
The underlying API does no longer work so it is replace. An API key is no longer necessary.
Users need to replace the `stopId` in there station thing configuration. See README.md for details.
Signed-off-by: Maximilian Hess <mail@ne0h.de>
Co-authored-by: Laurent Garnier <lg.hc@free.fr>
* [pulseaudio] Removing isIdle test
The isIdle boolean was not properly handled.
When disconnection is called, isIdle is not relevant : we should always honnor the disconnection request.
In fact, isIdle prevented disconnection when it is necessary (example : when a IOException occurs when sending audio to sink)
+Little bug fix on volume parsing: some volume request doesn't respond with a space after the comma separating left/right channel.
* [pulseaudio] Enhancement to the idle detection for disconnection
Using a counter to count client instead of a isIdle variable, which was not thread safe.
The PulseaudioSimpleProtocolStream parent class is now the sole responsible for closing source or sink stream.
* [pulseaudio] Small performance enhancement
Avoid a costly synchronized operation for a method called very often.
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* Migrate start/finish channels to full DateTime channels
* Unmark start and duration as advanced channels
* Add end channel
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Fix target temperature command
1) Fix target temperature command
2) fixed typo in log
* Allow update status even if the unit is not alive
Seems 'acwand' status is always "DOWN" so ignore this and just log debug
Signed-off-by: Roie Geron <roie.geron@gmail.com>
* Update Shelly and Tradfri bindings for upgrade to Californium 2.7.3
* Fixes deprecated API usages
* Resolves itest runbundles
Signed-off-by: Wouter Born <github@maindrain.net>
* Add NuvoNet source communication
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* fix readme
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* remove commented code
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Add startup/shutdown keypad messages
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Minor cleanup before code review
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Add configurable favorites labels
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* add new config item to i18n properties
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Fix restart detection and improve version matching
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* review changes
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Increment version number
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* remove repeated word in channels.xml
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Review changes
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* [mqtt.openassistant] Better labels for discoverd things
This PR introduces more simple label for things, instead of
"My Sensor (Sensor, Sensor, Sensor, Sensor, Sensor, Switch)" we have
simply "Me Sensor (5x Sensor, Switch)".
Signed-off-by: Sami Salonen <ssalonen@gmail.com>
see reference in code comment, but a measurement sensor is assumed to
be numeric, even if it doesn't have a unit
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [mqtt.homeassistant] Stable jsondb serialization for discovery results
Similar to openhab/openhab-core#2436, we want
to have consistent ordering of data in JSONDB. This is fixing the jsondb
order for mqtt.homeassistant discovery results, specifically, the
"topics" property.
* [mqtt.homeassistant] order using full topic string, not by subcomponent
Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [ecowatt] Initial contribution
This binding uses the Ecowatt API to expose clear signals to adopt the right gestures and to ensure a good supply of electricity for all in France.
Close#13351
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* Update bundles/org.openhab.binding.ecowatt/src/main/resources/OH-INF/thing/thing-types.xml
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
Co-authored-by: Fabian Wolter <github@fabian-wolter.de>
* [miio] Qingping Air Monitor (cgllc.airmonitor.s1) support is broken #13258
1. Custom refresh command for "battery" was defined . The device with "4.1.8_9999" firmware version does not allowed to obtain this information by this way which prevents to obtain other values. The solution should work for both old firmware (the battery information would be requested as before) and it does not prevent the device with new firmware from sending other values (I checked it).
Signed-off-by: Dmitry Malenok <_mak_@bk.ru>
* [miio] Qingping Air Monitor (cgllc.airmonitor.s1) support is broken #13258
1. The comment clarifying the "battery" parameter behavior was added.
Signed-off-by: Dmitry Malenok <_mak_@bk.ru>
Signed-off-by: Dmitry Malenok <_mak_@bk.ru>
* [jellyfin] add play by id channels and update sdk
* [jellyfin] add missed Playing Item Id channel
Signed-off-by: Miguel Álvarez <miguelwork92@gmail.com>
After upgrading mysql-connector to 8.0.30 this exception was thrown: class java.time.LocalDateTime cannot be cast to class java.sql.Timestamp
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [velux] make vanePosition channel dynamic
* [velux] change category of window position from 'blinds' to 'window'
Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>
* Add CPU load channel, update dependencies
* use PercentType, correct process CPU load
* Add and fix test
Signed-off-by: Mark Herwege <mark.herwege@telenet.be>
When a user has configured additional settings on a PoE port, like name.
These settings where lost when changing the PoEPort status in openHAB.
This was because in the binding only some information of the override was stored and when writing the new state this information would have been sent too.
In this change the object to store the override has been replaced by a plain json object. Therefore we don't have to know what is in it and all information is kept.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* Taking configured onvalue into account when sending status to actuator
* Added documentation for onValue configuration
Signed-off-by: Haavar Valeur <haavar@haavar.com>
Re-use the same pattern as defined in class DateTimeTyoe.
Allows the support of 0 to 9 digits after the seconds.
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* Using default onvalue if configured is null
* Using DTO for channel configuration. Changing channel config parameter names to camel case
Signed-off-by: Haavar Valeur <haavar@haavar.com>
* Added INCREASE/DECREASE commands for brightness/color Channels
* Fixed NPE in HeatingModel
* Use set unmapped color command for color control of bulbs
Signed-off-by: Christoph Weitkamp <github@christophweitkamp.de>
* [mimictts] Use http method POST instead of GET
Using POST method allows longer request size.
Also, using InputStreamResponseListener avoid keeping the response in-memory
* [mimictts] quick fix for regression : providing length
Some audiosink needs it
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [fineoffsetweatherstation] add support for the new GW2001 weather station with its WH90 sensor
* [fineoffsetweatherstation] add missing channel labels
* [fineoffsetweatherstation] remove redundant translations
* [fineoffsetweatherstation] add test data + fix for WH90
* [fineoffsetweatherstation] fix wrong size for `CMD_READ_RAIN`
Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>
Using the pool prevents exceptions like:
```
java.nio.channels.ClosedByInterruptException: null
at java.nio.channels.spi.AbstractInterruptibleChannel.end(AbstractInterruptibleChannel.java:199) ~[?:?]
at sun.nio.ch.FileChannelImpl.endBlocking(FileChannelImpl.java:162) ~[?:?]
at sun.nio.ch.FileChannelImpl.size(FileChannelImpl.java:388) ~[?:?]
at org.rrd4j.core.RrdNioBackend.<init>(RrdNioBackend.java:94) ~[?:?]
at org.rrd4j.core.RrdNioBackendFactory.open(RrdNioBackendFactory.java:163) ~[?:?]
at org.rrd4j.core.RrdBackendFactory.getBackend(RrdBackendFactory.java:521) ~[?:?]
at org.rrd4j.core.RrdDb.<init>(RrdDb.java:627) ~[?:?]
at org.rrd4j.core.RrdDb.of(RrdDb.java:500) ~[?:?]
at org.openhab.persistence.rrd4j.internal.RRD4jPersistenceService.getDB(RRD4jPersistenceService.java:323) ~[?:?]
at org.openhab.persistence.rrd4j.internal.RRD4jPersistenceService.store(RRD4jPersistenceService.java:141) ~[?:?]
at org.openhab.persistence.rrd4j.internal.RRD4jPersistenceService.lambda$0(RRD4jPersistenceService.java:211) ~[?:?]
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:515) [?:?]
at java.util.concurrent.FutureTask.run(FutureTask.java:264) [?:?]
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:304) [?:?]
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) [?:?]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) [?:?]
at java.lang.Thread.run(Thread.java:829) [?:?]
```
Fixes#13297
Also includes a few code improvements.
Signed-off-by: Wouter Born <github@maindrain.net>
* Fixed null pointer exception on state update with missing state
* Added variable for state. Changed onvalue configuration type to integer.
Signed-off-by: Haavar Valeur <haavar@haavar.com>
Minor change which gives more properties to detected things, which
should make a little easyer for users with these devices to identify them.
Signed-off-by: Jørgen Austvik <jaustvik@acm.org>
* [jrubyscripting] Update to jruby 9.3.7.0
* [jrubyscripting] Exception fixed in jruby 9.3.7.0
The BootstrapMethodError should no longer be thrown by jruby since 9.3.7. Fixed in https://github.com/jruby/jruby/pull/7271
Signed-off-by: Jimmy Tanagra <jcode@tanagra.id.au>
* Fixes a concurrent modification exception, cleans up handler on dispose, fixes totally broken last contact channel
Fixes#13094
Signed-off-by: Dan Cunningham <dan@digitaldan.com>
* [tado] fix npe when target temperature json element is missing
* [tado] apply temperature command/value restrictions
Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>
* The Automower Connect API Authentication does not work anymore as they moved to a new authentication method. (AppKey and AppSecret) - adopted. Fixes issue #12980.
Signed-off-by: Boris Krivonog <boris.krivonog@inova.si>
* Adding base URL to config to allow for manually adding thing
* Simplified reading of the base URL configuration. Renamed field to baseUrl to be consistent.
* Changed config parameters to camel case
Signed-off-by: Haavar Valeur <haavar@haavar.com>
* Removed provider header, no longer necessary
* Fixed connection tracker not starting after some websocket restarts
Signed-off-by: Gerhard Riegler <gerhard.riegler@gmail.com>
For all models providing these information and relying on ASCII protocol.
The binding now supports reading of status message containing variable length content.
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* [velux] use new API, and log StatusReply codes
Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>
Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>
* [sonos] Added support of RadioApp music service
* Extract artist and song title from TITLE
* Extract code in methods to reduce the size of the method updateMediaInformation
* Create new class and add tests
Fix#13208
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* - bug fix in konnnected handler to update change of smarthome units to Units
- multiple changes to code to enable support for the konnected pro-module
* Added optional configuration for callback URI
* Added support for more than one buzzer sound. Made zone/pin variables consistent. Removed preconfigured channels to be consistent (either all should be added or none).
Signed-off-by: Haavar Valeur <haavar@haavar.com>
* [knx] Add support for KNX IP Secure
* add support for KNX IP Secure, new options SECURETUNNEL and
SECUREROUTER, refers to #8872
* add config options for credentials for secure connections
* update user documentation
* add test cases
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
given:
```
Group eThermostat { homekit="Thermostat" }
Number:Temperature Thermostat_AmbTemp (eThermostat) { homekit="CurrentTemperature" }
Number:Temperature Thermostat_SetTemp (eThermostat) { homekit="TargetTemperature" }
Group gThermostatZoneContacts
// in reality there are multiple thermostats and multiple of these groups,
// so that a rule on members of gThermostatZoneContacts can find the related
// thermostat to turn it off when a window is open
Group:Contact:OR(OPEN,CLOSED) gWindows (eThermostat, gThermostatZoneContacts)
Contact Window_Contact (gWindows) { homekit="ContactSensor" }
```
When constructing the Thermostat accessory for eThermostat, detects the
Window_Contact as a mandatory characteristic, because it's a base accessory
in a nested group. This leads to lots of warnings about the temperature
value of a contact item being out of range.
The fix is two-fold - first of all, there's no reason to search nested
groups for characteristics of a complex accessory. Second of all,
even if for some reason you were to nest an accessory in an accessory,
the nested accessory does not actually belong to the outer accessory,
so don't add it as a mandatory characteristic of the outer.
I suspect there's still one more bug, because AbstractHomekitAccessoryImpl.
getCharacteristic(HomekitCharacteristicType.CURRENT_TEMPERATURE) was
returning Window_Contact, which is only tagged as a ContactSensor. But
after fixing the above two bugs, it was no longer reproducible, and I
didn't continue digging.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [jrubyscripting] check if gems are installed before installing them
this avoids unecessary downloads and overwrites, or even more importantly
errors if the GEM_HOME is not writable by the openhab user.
this also adds a configuration option for if you want to check for
updates every time configuration is applied (or openhab restarts). this
is useful if your OpenHAB system can't access the internet regularly.
Signed-off-by: Cody Cutrer <cody@cutrer.us>
* [nibeheatpump] Added PRODINo ESP32 Ethernet v1 board support
Also added:
- telnet debug support (UDP debug removed)
- new configuration model
- OTA update support for PRODINo ESP32 Ethernet v1 board
Signed-off-by: Pauli Anttila <pauli.anttila@gmail.com>
* Fix thing offline on invalid command
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Rename exception
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Go back to last thing status after temporary disruptions
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Increase call frequency after device being unreachable
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Minor bugfixes from hardening
Signed-off-by: Markus Michels <markus7017@gmail.com>
* review changes applied
Signed-off-by: Markus Michels <markus7017@gmail.com>
* controlProfile is type String
Signed-off-by: Markus Michels <markus7017@gmail.com>
Concerns the models RSP-1570, RSP-1572 and RSX-1562
BYPASS as DSP mode is also removed for these models.
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* [rotel] Add missed command to switch between ProLogic modes
All models using the HEX protocol are concerned.
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* Optimize API calls for reduced load
* Add position tracking (on map)
* Provide faster updates when active
* Optimize state update after triggering commands
* Clean up duration variables
* Add initial test coverage for DeviceStatus
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Move test providers to dedicated folder
* Simplify resource loading
* Clarify what is being tested
* Extract online communication test to separate class
* Fix SAT findings
* Rename variable to comply with naming convention
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
support. In general Gen1 and Gen2 devices have a total different API so
I spliced the API code in version/gen 1 and 2. This means restructuring
the classes (e.h. api+coap became api+api1+api2) and therefor dummy
changes in the code, e.g. import statements. This creates a lot of
overhead and separating those "dummy changes" simplifies merging the
actual PR.
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Refresh cutting times right after next planned cutting
* Cancel cutting time future unconditionally
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [fineoffsetweatherstation] add support for ELV protocol
* [fineoffsetweatherstation] remove german translations
* [fineoffsetweatherstation] add representationProperty for gateway, fix unit of irradiation-uv
* [fineoffsetweatherstation] add representationProperties in descriptor xml file
* [fineoffsetweatherstation] set channels values to undef in case of communication errors
* [fineoffsetweatherstation] use lock for request synchronisation
* [fineoffsetweatherstation] marke sensors as gone, if they got unpaired
resolves#12763
Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>
* Fix communication error when no planned next cutting
* Provide targeted handling of missing cutting times
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [rotel] Add support of multiple zones (ASCII protocol)
Models C8 and C8+ (distribution amplifiers)
Code factorization.
Simulator updated.
* Set model/firmware thing properties (ASCII V2 protocol)
* Review comment: NumberOf rather than Nb
* Review comment: getZoneCommand: IllegalArgumentException if numZone is
outside 1-4
* Review comment: constant for volumeUpDown
* Simplification: method isPowerOn with numZone parameter (range 0-4)
* Review comment: fix for getPowerOffCommand
* Review comment: new method isZoneAvailable to factorize code
* Review comment: use MAX_NUMBER_OF_ZONES to check range validity
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
Separate Venstar thermostat API calls to change the away mode or
schedule-enabled mode so that the POST to the thermostat's REST
API settings endpoint contains only one of these two params.
Newer ColorTouch thermostat firmwares will reject any POSTs to the
settings endpoint that include the 'schedule' parameter when the
thermostat is currently in AWAY mode, regardless of the value
passed for 'schedule'. This had the effect of preventing the
OpenHab binding from un-setting away mode.
Signed-off-by: David Eberhart <git@daveeberhart.com>
* New translations astro.properties (Hungarian)
* New translations chromecast.properties (Hungarian)
* New translations darksky.properties (Hungarian)
* New translations coronastats.properties (Hungarian)
* New translations evohome.properties (Hungarian)
* New translations mcd.properties (Italian)
* New translations amazondashbutton.properties (Italian)
* New translations openwebnet.properties (Italian)
* New translations openhabcloud.properties (Italian)
* New translations voicerss.properties (Italian)
* New translations tado.properties (Italian)
* New translations wled.properties (Italian)
* New translations livisismarthome.properties (Italian)
* Allow hostname as gateway network address
* Document configuration parameters for things
* Add message for bridge communication error
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* - new device types added
- min firmware set to 1.8.2
- unit for gas concentration fixed (ppm)
- Auto numbering on channel labels for groups with multiple instances
(add sequence suffix)
- API and Thing interfaces defined to restrict access to those classes
- fix on TRV boost update via CoAP
- fix for status.temperature and status.uptime, internalTemp channels
- don’t use meter timestamp if not present (RGBW2)
- low battery indicator for sensor devices fixed
- device detection based on model/type improved
- various messages/translations fixed/improved
- README updated (missing thing types added)
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* missing properties added
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* minor changes
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* markdown fixed
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* review changes applied
Signed-off-by: Markus Michels <markus7017@gmail.com>
* shelly_de.properties restored from main branch
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Switch to fork of gatt parser library in order to fix incompatibility with xstream
* Add SAT suppressions
* Add gson dependency
Signed-off-by: Kai Kreuzer <kai@openhab.org>
* [mimictts] Initial contribution
Add a voice service for Mimic (version 3) TTS from Mycroft AI.
Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>
* [lcn] Add shutter positioning/angle, operating hours counters, tunable white, regulator mode, beeping
Also, fix possible race condition during connecting, when the PC coupler is not connected to the LCN data wire.
Replace discontinued LCN-PKE by LCN-VISU.
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
* [goecharger] fix data type for energy (nrg)
* nrg need to be double for V2
* [goecharger] update example
Signed-off-by: Reinhard Plaim <reinhardplaim@gmail.com>
* Fix multiple authentications during initialization
* Fix cutting times being fetched twice during initialization
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Add missing specialized text for unreachable device
* Document IndegoUnreachableException on relevant paths
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Fix auto-update policy for stateless channel
* Reflect appliance state in switch channel state
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [openhabcloud] Makes the baseURL and item updates options advanced, cleans up documentation, disabled sending updates to the community myopenHAB.org service.
Fixes#12582
Signed-off-by: Dan Cunningham <dan@digitaldan.com>
Subchannels were created by appending the key. However this was done inside a loop and if multiple updates were needed they would be appended to the channel name, instead of taking the channel name each time.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* New translations enigma2.properties (Norwegian)
* New translations enigma2.properties (Hungarian)
* New translations enigma2.properties (Norwegian)
* New translations iCloud.properties (Finnish)
* New translations tradfri.properties (Finnish)
* New translations map.properties (Finnish)
* New translations googletts.properties (German)
* New translations voicerss.properties (Finnish)
* New translations xmltv.properties (Finnish)
* New translations exec.properties (Finnish)
* New translations jinja.properties (Finnish)
* New translations js.properties (Finnish)
* New translations regex.properties (Finnish)
* New translations jsonpath.properties (Finnish)
* New translations scale.properties (Finnish)
* New translations xslt.properties (Finnish)
* New translations xpath.properties (Finnish)
* New translations opensprinkler.properties (Finnish)
* New translations porcupineks.properties (Finnish)
* New translations netatmo.properties (Finnish)
* New translations imperihome.properties (Finnish)
* [pidcontroller] Implement previous state recovery on startup
This feature allows the PID controller parameters to be updated and
OpenHAB to be restarted without losing the current controller state.
This is especially important for systems with a long response time.
For example it might take up to a day for an underfloor heating
controller to stabilise after losing state and having to build up
the integrator value from zero.
Signed-off-by: Lenno Nagel <lenno@nagel.ee>
* Change logger.info -> logger.debug
Signed-off-by: Lenno Nagel <lenno@nagel.ee>
* Change debug Item -> inspector Item in README
Signed-off-by: Lenno Nagel <lenno@nagel.ee>
* Add documentation regarding state persistence
Signed-off-by: Lenno Nagel <lenno@nagel.ee>
* Update bundles/org.openhab.automation.pidcontroller/README.md
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
* Update bundles/org.openhab.automation.pidcontroller/README.md
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
Co-authored-by: Fabian Wolter <github@fabian-wolter.de>
* Adaptation of the login for API version 1.1
* Fixed logging statement
* Fixed logging message
* Reverted changes in the german translation
Signed-off-by: Gerhard Riegler <gerhard.riegler@gmail.com>
* New translations googletts.properties (French)
* New translations googletts.properties (German)
* New translations googlestt.properties (German)
* New translations googlestt.properties (French)
* DALI: Implement DT8 (single-channel RGB & color temperature) device type, fix device and group addressing
* dali: Store BridgeHandler in a local variable instead of retrieving it over and over again.
* dali: Follow logging guidelines.
Signed-off-by: Sebastian Philipp <github-ebqurd@s3lph.me>
* New translations boschindego.properties (Danish)
* New translations remoteopenhab.properties (German)
* New translations remoteopenhab.properties (Hungarian)
Starting with openHAB 3.3, the framework enforces using serial
ports which are detected by the system by default. This feature
is now disabled for the KNX addon to allow using symlinks to
ports as well.
Refers-to: openhab/openhab-core#3014
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Clarify handling of initial read and readInterval in documentation.
Updated labels to distinguish readInterval and pollInterval.
Fixes#12921.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
