mirror of
https://github.com/openhab/openhab-addons.git
synced 2025-01-10 23:22:02 +01:00
47 lines
1.3 KiB
Markdown
47 lines
1.3 KiB
Markdown
# SMA Energy Meter Binding
|
|
|
|
This Binding is used to display the measured values of a SMA Energy Meter device.
|
|
It shows purchased and grid feed-in power and energy.
|
|
|
|
## Supported Things
|
|
|
|
This Binding supports SMA Energy Meter devices.
|
|
|
|
## Discovery
|
|
|
|
The Energy Meter is discovered by receiving data on the default multicast IP address.
|
|
|
|
## Binding Configuration
|
|
|
|
No binding configuration required.
|
|
|
|
## Thing Configuration
|
|
|
|
Usually no manual configuration is required, as the multicast IP address and the port remain on their factory set values.
|
|
Optionally, a refresh interval (in seconds) can be defined.
|
|
|
|
## Channels
|
|
|
|
| Channel | Description |
|
|
|-------------|------------------------|
|
|
| powerIn | Purchased power |
|
|
| powerInL1 | Purchased power L3 |
|
|
| powerInL2 | Purchased power L2 |
|
|
| powerInL3 | Purchased power L3 |
|
|
| powerOut | Grid feed-in power |
|
|
| powerOutL1 | Grid feed-in power L1 |
|
|
| powerOutL2 | Grid feed-in power L2 |
|
|
| powerOutL3 | Grid feed-in power L3 |
|
|
| energyIn | Purchased energy |
|
|
| energyInL1 | Purchased energy L1 |
|
|
| energyInL2 | Purchased energy L2 |
|
|
| energyInL3 | Purchased energy L3 |
|
|
| energyOut | Grid feed-in energy |
|
|
| energyOutL1 | Grid feed-in energy L1 |
|
|
| energyOutL2 | Grid feed-in energy L2 |
|
|
| energyOutL3 | Grid feed-in energy L3 |
|
|
|
|
## Full example
|
|
|
|
N/A
|