demus/openhab-addons
1
0
Fork 0
mirror of https://github.com/openhab/openhab-addons.git synced 2025-01-10 15:11:59 +01:00
Code Issues Packages Projects Releases Wiki Activity
main
openhab-addons/bundles/org.openhab.binding.sonyprojector/README.md
lolodomo cc71808b78
[sonyprojector] Add discovery through SDDP (#16849) 
Only applicable to projector models having a network connector

Signed-off-by: Laurent Garnier <lg.hc@free.fr>
2024-06-14 17:48:02 +02:00

521 lines
43 KiB
Markdown
Raw Permalink Blame History

# SonyProjector Binding
This binding can be used to conrol Sony Projectors through:
- an Ethernet connection using PJ Talk
- or a (direct) serial connection
- or a serial over IP connection
For serial connection, you have to use a D-Sub 9 Pin cross (reverse) cable also called null modem.
For this cable, you will need a female connector on openHAB server side and a male connector on projector side (projector connector is female).
For users without serial connector on server side, of course you can add a serial to USB adapter to this serial cable.
Has been tested successfully using [this cable](https://www.amazon.fr/UGREEN-PL2303-Windows-Chrome-Connecteur/dp/B00QUZY4UG/ref=sr_1_3?ie=UTF8&qid=1548652565&sr=8-3&keywords=serial+usb) connected to a Windows 10 PC and Raspberry Pi 2.
In such cases, setup a serial connection thing type in openHAB.
You don't need to have your projector directly connected to your openHAB server.
You can connect it for example to a Raspberry Pi and use [ser2net Linux tool](https://sourceforge.net/projects/ser2net/) to make the serial connection available on LAN (serial over IP).
In such a case, setup a serial over IP connection thing type in openHAB.
Here is the list of supported Sony projectors based on Sony protocol manuals:
- VPL-HW15
- VPL-HW20
- VPL-HW30ES
- VPL-HW35ES
- VPL-HW40ES
- VPL-HW50ES
- VPL-HW55ES
- VPL-HW58ES
- VPL-HW60
- VPL-HW65
- VPL-HW68
- VPL-VW40
- VPL-VW50
- VPL-VW60
- VPL-VW70
- VPL-VW85
- VPL-VW95ES
- VPL-VW100
- VPL-VW315
- VPL-VW320
- VPL-VW328
- VPL-VW365
- VPL-VW515
- VPL-VW520
- VPL-VW528
- VPL-VW665
- VPL-VW1000ES
- VPL-VW1100ES
Here is the list of supported Sony projectors but not sure due to assumptions done based on Sony user manuals and protocol manuals of other similar models (because Sony protocol manuals unfortunately not available for these models):
- VPL-HW10
- VPL-HW45ES
- VPL-VW80
- VPL-VW90ES
- VPL-VW200
- VPL-VW260ES
- VPL-VW270ES
- VPL-VW285ES
- VPL-VW295ES
- VPL-VW300ES
- VPL-VW350ES
- VPL-VW385ES
- VPL-VW500ES
- VPL-VW550ES (= VW675)
- VPL-VW570ES
- VPL-VW600ES
- VPL-VW675ES
- VPL-VW695ES
- VPL-VW760ES
- VPL-VW870ES
- VPL-VW885ES
- VPL-VW995ES
Control of other (HW or VW) models could work with the binding by selecting one of the supported models but without any guarantee.
Here is a list of potential candidates:
- VPL-VW10HT
- VPL-VW11HT
- VPL-VW12HT
- VPL-VW360ES
- VPL-VW685ES
- VPL-VW5000ES
## Supported Things
This binding supports the following thing types:
| Thing Type | Description |
| ---------------------- | ------------------------------------------------------- |
| ethernetconnection | Ethernet connection to the Sony projector using PJ Talk |
| serialconnection | Serial connection to the Sony projector |
| serialoveripconnection | Serial over IP connection to the Sony projector |
## Discovery
If the projector is connected via Ethernet and the 'Start SDDP Service' option is present and enabled in the projector Advanced Settings->Service page, the Thing using Ethernet connection and PJ Talk will be discovered automatically.
Serial or Serial over IP connections must be configured manually.
## Binding Configuration
There are no overall binding configuration settings that need to be set.
All settings are through thing configuration parameters.
## Thing Configuration
### Ethernet connection
The Ethernet connection thing requires the following configuration parameters:
| Parameter Label | Parameter ID | Description | Required | Default | Accepted values |
| --------------- | ------------ | ------------------------------------------------------------------------ | -------- | ------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Address | host | Host name or IP address of the projector | true | | |
| Port | port | Communication port. Default is 53484 | false | 53484 | |
| Model | model | Projector model to be controlled. Default is AUTO | false | AUTO | AUTO, VPL-HW60, VPL-HW65, VPL-HW68, VPL-VW100, VPL-VW200, VPL-VW260ES, VPL-VW270ES, VPL-VW285ES, VPL-VW295ES, VPL-VW300ES, VPL-VW315, VPL-VW320, VPL-VW328, VPL-VW350ES, VPL-VW365, VPL-VW385ES, VPL-VW500ES, VPL-VW515, VPL-VW520, VPL-VW528, VPL-VW550ES, VPL-VW570ES, VPL-VW600ES, VPL-VW665, VPL-VW675ES, VPL-VW695ES, VPL-VW760ES, VPL-VW870ES, VPL-VW885ES, VPL-VW995ES, VPL-VW1000ES, VPL-VW1100ES |
| Community | community | Community of the projector. Length must be 4 characters. Default is SONY | false | SONY | |
Some notes:
- Take care to enable PJ Talk on your projector.
### Serial connection
The serial connection thing requires the following configuration parameters:
| Parameter Label | Parameter ID | Description | Required | Default | Accepted values |
| --------------- | ------------ | -------------------------------------------------- | -------- | --------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Serial Port | port | Serial port to use for connecting to the projector | true | | |
| Model | model | Projector model to be controlled | true | VPL-VW528 | VPL-HW10, VPL-HW15, VPL-HW20, VPL-HW30ES, VPL-HW35ES, VPL-HW40ES, VPL-HW45ES, VPL-HW50ES, VPL-HW55ES, VPL-HW58ES, VPL-HW60, VPL-HW65, VPL-HW68, VPL-VW40, VPL-VW50, VPL-VW60, VPL-VW70, VPL-VW80, VPL-VW85, VPL-VW90ES, VPL-VW95ES, VPL-VW100, VPL-VW200, VPL-VW260ES, VPL-VW270ES, VPL-VW285ES, VPL-VW295ES, VPL-VW300ES, VPL-VW315, VPL-VW320, VPL-VW328, VPL-VW350ES, VPL-VW365, VPL-VW385ES, VPL-VW500ES, VPL-VW515, VPL-VW520, VPL-VW528, VPL-VW550ES, VPL-VW570ES, VPL-VW600ES, VPL-VW665, VPL-VW675ES, VPL-VW695ES, VPL-VW760ES, VPL-VW870ES, VPL-VW885ES, VPL-VW995ES, VPL-VW1000ES, VPL-VW1100ES |
Some notes:
- On Linux, you may get an error stating the serial port cannot be opened when the SonyProjector binding tries to load. You can get around this by adding the `openhab` user to the `dialout` group like this: `usermod -a -G dialout openhab`.
- Also on Linux you may have issues with the USB if using two serial USB devices e.g. SonyProjector and RFXcom. See the [general documentation about serial port configuration](/docs/administration/serial.html) for more on symlinking the USB ports.
### Serial over IP connection
The serial over IP connection thing requires the following configuration parameters:
| Parameter Label | Parameter ID | Description | Required | Default | Accepted values |
| --------------- | ------------ | ----------------------------------------------------------------- | -------- | --------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Address | host | Host name or IP address of the machine connected to the projector | true | | |
| Port | port | Communication port | true | | |
| Model | model | Projector model to be controlled | true | VPL-VW528 | VPL-HW10, VPL-HW15, VPL-HW20, VPL-HW30ES, VPL-HW35ES, VPL-HW40ES, VPL-HW45ES, VPL-HW50ES, VPL-HW55ES, VPL-HW58ES, VPL-HW60, VPL-HW65, VPL-HW68, VPL-VW40, VPL-VW50, VPL-VW60, VPL-VW70, VPL-VW80, VPL-VW85, VPL-VW90ES, VPL-VW95ES, VPL-VW100, VPL-VW200, VPL-VW260ES, VPL-VW270ES, VPL-VW285ES, VPL-VW295ES, VPL-VW300ES, VPL-VW315, VPL-VW320, VPL-VW328, VPL-VW350ES, VPL-VW365, VPL-VW385ES, VPL-VW500ES, VPL-VW515, VPL-VW520, VPL-VW528, VPL-VW550ES, VPL-VW570ES, VPL-VW600ES, VPL-VW665, VPL-VW675ES, VPL-VW695ES, VPL-VW760ES, VPL-VW870ES, VPL-VW885ES, VPL-VW995ES, VPL-VW1000ES, VPL-VW1100ES |
Some notes:
- Here is an example of ser2net.conf you can use to share your serial port /dev/ttyUSB0 on IP port 3333 using [ser2net Linux tool](https://sourceforge.net/projects/ser2net/):
```text
3333:raw:0:/dev/ttyUSB0:38400 8DATABITS EVEN 1STOPBIT
```
## Channels
The following channels are available:
| Channel ID | Label | Item Type | Access Mode | Description | Possible values (depends on model) |
| ----------------- | ------------------------ | --------- | ----------- | ----------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------- |
| power | Power | Switch | RW | Power ON/OFF the projector | ON, OFF |
| powerstate | Power State | String | R | Current detailed power state of the projector | |
| input | Video Input | String | RW | Select the equipment from which to display images | Video, SVideo, InputA, Component, HDMI, HDMI1, HDMI2, DVI |
| calibrationpreset | Calibrated Preset | String | RW | Adjust the picture viewing mode by selecting one of the preset modes | Film1, Film2, Digital, Reference, TV, Photo, Game, BRTCINE, BRTTV, Dynamic, Standard, Cinema, Cinema1, Cinema2, Cinema3, User, User1, User2, User3 |
| contrast | Contrast | Dimmer | RW | Adjust the contrast of the picture | Value between 0 and 100 |
| brightness | Brightness | Dimmer | RW | Adjust the brightness of the picture | Value between 0 and 100 |
| color | Color | Dimmer | RW | Adjust the color density | Value between 0 and 100 |
| hue | Hue | Dimmer | RW | Adjust the color tone | Value between 0 and 100 |
| sharpness | Sharpness | Dimmer | RW | Sharpen the outline of the picture or reduce the noise | Value between 0 and 100 |
| colortemperature | Color Temperature | String | RW | Adjust the color temperature | D55, D65, D75, D93, DCI, High, Middle, Low, Low1, Low2, Custom, Custom1, Custom2, Custom3, Custom4, Custom5 |
| irismode | Iris Mode | String | RW | Switch the iris aperture function | AutoFull, Full, AutoLimited, Limited, On, Auto, Auto1, Auto2, Manual, Off |
| irismanual | Iris Manual | Dimmer | RW | Force the iris aperture to a fixed value | Value between 0 and 100 |
| irissensitivity | Iris Sensitivity | String | RW | Select the iris sensitivity | Recommend, Fast, Slow |
| lampcontrol | Lamp Control | String | RW | Switch the lamp output | High, Low |
| filmprojection | Film Projection | String | RW | Reproduce an image similar to that of projected film | On, Mode1, Mode2, Mode3, Off |
| motionenhancer | Motion Enhancer | String | RW | Reproduce fast-moving pictures smoothly without generating afterimages | High, Low, SmoothHigh, SmoothLow, Impulse, Combination, TrueCinema, Off |
| contrastenhancer | Contrast Enhancer | String | RW | Correct the level of bright and dark parts automatically | High, Middle, Low, Off, -3, -2, -1, 0, 1, 2, 3 |
| filmmode | Film Mode | String | RW | Select the playback mode for film sources | Auto, Auto1, Auto2, Off |
| gammacorrection | Gamma Correction | String | RW | Adjust the response characteristics of the tone of the picture | 1.8, 2.0, 2.1, 2.2, 2.4, 2.6, Gamma1, Gamma2, Gamma3, Gamma4, Gamma5, Gamma6, Gamma7, Gamma8, Gamma9, Gamma10, Off |
| colorspace | Color Space | String | RW | Convert the color space | BT709, BT2020, DCI, AdobeRGB, ColorSpace1, ColorSpace2, ColorSpace3, Custom, Normal, Wide, Wide1, Wide2, Wide3 |
| nr | Noise Reduction | String | RW | Reduce the roughness or noise of the picture | Auto, High, Middle, Low, Off |
| blocknr | Block Noise Reduction | String | RW | Reduce digital noise that appears in mosaic-like pattern | High, Middle, Low, Off |
| mosquitonr | Mosquito Noise Reduction | String | RW | Reduce digital noise that appears near the outline of the picture | High, Middle, Low, Off |
| mpegnr | MPEG Noise Reduction | String | RW | Reduce block noise and mosquito noise, in particular in digital signals | Auto, High, Middle, Low, Off |
| xvcolor | x.v.Color | Switch | RW | Set this when playing back an x.v.Color video signal | ON, OFF |
| picturemuting | Picture Muting | Switch | RW | Mute or unmute the picture | ON, OFF |
| aspect | Aspect Ratio | String | RW | Set the aspect ratio of the picture to be displayed | Normal, 185, 235, VStretch, Stretch, Squeeze, Full, Full1, Full2, WideZoom, Zoom, Anamorphic, Subtitle |
| overscan | Overscan | Switch | RW | Hide or not the edges of the picture | ON, OFF |
| pictureposition | Picture Position | String | RW | Adjust the picture position | 185, 235, Custom1, Custom2, Custom3, Position1, Position2, Position3, Position4, Position5 |
| lampusetime | Lamp Use Time | Number | R | Indicate how long the lamp has been turned on | |
| ircommand | IR Command | String | W | Send an infrared remote command | |
Here is the list of infrared remote commands you can use, some of them will work only on particular models.
| Command | Description |
| ------------------- | ------------------------- |
| POWER | Power On/Off |
| POWER_ON | Power On |
| POWER_OFF | Power Off |
| INPUT | Video Input |
| INPUT_DVI | DVI |
| INPUT_HDMI | HDMI |
| INPUT_HDMI1 | HDMI 1 |
| INPUT_HDMI2 | HDMI 2 |
| INPUT_COMPONENT | Component |
| INPUT_SVIDEO | S-Video |
| INPUT_VIDEO | Video |
| INPUT_INPUTA | Input A |
| CALIBRATION_PRESET | Calibration preset |
| PRESET_REFERENCE | Reference |
| PRESET_TV | TV |
| PRESET_PHOTO | Photo |
| PRESET_GAME | Game |
| PRESET_DYNAMIC | Dynamic |
| PRESET_STANDARD | Standard |
| PRESET_CINEMA | Cinema |
| PRESET_CINEMA1 | Cinema 1 |
| PRESET_CINEMA2 | Cinema 2 |
| PRESET_CINEMA3 | Cinema 3 |
| PRESET_DIGITAL | Cinema Digital |
| PRESET_FILM1 | Cinema Film 1 |
| PRESET_FILM2 | Cinema Film 2 |
| PRESET_BRTCINE | Bright Cinema |
| PRESET_BRTTV | Bright TV |
| PRESET_USER | User |
| PRESET_USER1 | User 1 |
| PRESET_USER2 | User 2 |
| PRESET_USER3 | User 3 |
| CONTRAST_UP | Contrast + |
| CONTRAST_DOWN | Contrast - |
| BRIGHTNESS_UP | Brightness + |
| BRIGHTNESS_DOWN | Brightness - |
| COLOR_UP | Color + |
| COLOR_DOWN | Color - |
| HUE_UP | Hue + |
| HUE_DOWN | Hue - |
| SHARPNESS_UP | Sharpness + |
| SHARPNESS_DOWN | Sharpness - |
| CONTRAST_ENHANCER | Contrast Enhancer |
| COLOR_TEMP | Color Temperature |
| GAMMA_CORRECTION | Gamma Correction |
| COLOR_SPACE | Color Space |
| PICTURE_MUTING | Picture Muting |
| REAL_COLOR | Real Color Processing |
| REALITY_CREATION | Reality Creation |
| FILM_PROJECTION | Film Projection |
| MOTION_ENHANCER | Motion Enhancer |
| IRIS_MODE | Iris Mode |
| ASPECT | Aspect Ratio |
| ASPECT_NORMAL | Normal |
| ASPECT_FULL | Full |
| ASPECT_FULL1 | Full 1 |
| ASPECT_FULL2 | Full 2 |
| ASPECT_ZOOM | Zoom |
| ASPECT_WIDEZOOM | Wide Zoom |
| ASPECT_VSTRETCH | V Stretch |
| ASPECT_STRETCH | Stretch |
| ASPECT_SQUEEZE | Squeeze |
| ASPECT_185 | 1.85:1 Zoom |
| ASPECT_235 | 2.35:1 Zoom |
| ASPECT_ANAMORPHIC | Anamorphic |
| ASPECT_SUBTITLE | Subtitle |
| PICTURE_POS_185 | Picture Position 1.85:1 |
| PICTURE_POS_235 | Picture Position 2.35:1 |
| PICTURE_POS_CUSTOM1 | Picture Position Custom 1 |
| PICTURE_POS_CUSTOM2 | Picture Position Custom 2 |
| PICTURE_POS_CUSTOM3 | Picture Position Custom 3 |
| MENU | Menu |
| UP | Cursor UP |
| DOWN | Cursor DOWN |
| LEFT | Cursor LEFT |
| RIGHT | Cursor RIGHT |
| ENTER | Enter |
| RESET | Reset |
| MEMORY | Memory |
| STATUS_ON | Status On |
| STATUS_OFF | Status Off |
| ADJUST_PICTURE | Adjust Picture |
| COLOR_CORRECTION | Color Correction |
| PITCH | Screen Pitch |
| SHIFT | Screen Shift |
| APA | APA |
| DOT_PHASE | Dot Phase |
| V_KEYSTONE | V Keystone |
| V_KEYSTONE_UP | V Keystone + |
| V_KEYSTONE_DOWN | V Keystone - |
| LENS_CONTROL | Lens Control |
| LENS_SHIFT | Lens Shift |
| LENS_SHIFT_LEFT | Lens Shift LEFT |
| LENS_SHIFT_RIGHT | Lens Shift RIGHT |
| LENS_SHIFT_UP | Lens Shift UP |
| LENS_SHIFT_DOWN | Lens Shift DOWN |
| LENS_ZOOM | Lens Zoom |
| LENS_ZOOM_LARGE | Lens Zoom Large |
| LENS_ZOOM_SMALL | Lens Zoom Small |
| LENS_FOCUS | Lens Focus |
| LENS_FOCUS_FAR | Lens Focus Far |
| LENS_FOCUS_NEAR | Lens Focus Near |
| LENS_POSITION | Lens Position |
| MODE_3D | 3D |
| OPTIONS | Options |
| EXIT | Exit |
| SYNC_MENU | Sync Menu |
| PLAY | Play |
| STOP | Stop |
| PAUSE | Pause |
| FAST_REWIND( | Fast Rewind |
| FAST_FORWARD | Fast Forward |
| PREVIOUS | Previous |
| NEXT | Next |
In case you know an infrared remote command not listed in this list and you know its hexadecimal code, you can send the hexadecimal value directly; it must be 4 characters started with either 17, 19 or 1B.
## Full Example
example.things:
```java
Thing sonyprojector:ethernetconnection:proj "Projector" [ host="192.168.0.200" ]
Thing sonyprojector:ethernetconnection:proj2 "Projector" [ host="192.168.0.205", port=53484, model="VPL-VW365", community="SONY" ]
Thing sonyprojector:serialconnection:proj3 "Projector" [ port="/dev/ttyUSB0", model="VPL-HW55ES" ]
Thing sonyprojector:serialoveripconnection:proj4 "Projector" [ host="192.168.0.210", port=3000, model="VPL-VW1000ES" ]
```
example.items:
```java
Switch proj_power "Power" { channel = "sonyprojector:ethernetconnection:proj:power" }
String proj_powerstate "Power State [%s]" { channel = "sonyprojector:ethernetconnection:proj:powerstate" }
String proj_input "Video Input [%s]" { channel = "sonyprojector:ethernetconnection:proj:input" }
String proj_calibrationpreset "Calibrated Preset [%s]" { channel = "sonyprojector:ethernetconnection:proj:calibrationpreset" }
Dimmer proj_contrast "Contrast [%d]" { channel = "sonyprojector:ethernetconnection:proj:contrast" }
Dimmer proj_brightness "Brightness [%d]" { channel = "sonyprojector:ethernetconnection:proj:brightness" }
Dimmer proj_color "Color [%d]" { channel = "sonyprojector:ethernetconnection:proj:color" }
Dimmer proj_hue "Hue [%d]" { channel = "sonyprojector:ethernetconnection:proj:hue" }
Dimmer proj_sharpness "Sharpness [%d]" { channel = "sonyprojector:ethernetconnection:proj:sharpness" }
String proj_colortemperature "Color Temperature [%s]" { channel = "sonyprojector:ethernetconnection:proj:colortemperature" }
String proj_irismode "Iris Mode [%s]" { channel = "sonyprojector:ethernetconnection:proj:irismode" }
Dimmer proj_irismanual "Iris Manual [%d]" { channel = "sonyprojector:ethernetconnection:proj:irismanual" }
String proj_irissensitivity "Iris Sensitivity [%s]" { channel = "sonyprojector:ethernetconnection:proj:irissensitivity" }
String proj_lampcontrol "Lamp Control [%s]" { channel = "sonyprojector:ethernetconnection:proj:lampcontrol" }
String proj_filmprojection "Film Projection [%s]" { channel = "sonyprojector:ethernetconnection:proj:filmprojection" }
String proj_motionenhancer "Motion Enhancer [%s]" { channel = "sonyprojector:ethernetconnection:proj:motionenhancer" }
String proj_contrastenhancer "Contrast Enhancer [%s]" { channel = "sonyprojector:ethernetconnection:proj:contrastenhancer" }
String proj_filmmode "Film Mode [%s]" { channel = "sonyprojector:ethernetconnection:proj:filmmode" }
String proj_gammacorrection "Gamma Correction [%s]" { channel = "sonyprojector:ethernetconnection:proj:gammacorrection" }
String proj_colorspace "Color Space [%s]" { channel = "sonyprojector:ethernetconnection:proj:colorspace" }
String proj_nr "Noise Reduction [%s]" { channel = "sonyprojector:ethernetconnection:proj:nr" }
String proj_blocknr "Block Noise Reduction [%s]" { channel = "sonyprojector:ethernetconnection:proj:blocknr" }
String proj_mosquitonr "Mosquito Noise Reduction [%s]" { channel = "sonyprojector:ethernetconnection:proj:mosquitonr" }
String proj_mpegnr "MPEG Noise Reduction [%s]" { channel = "sonyprojector:ethernetconnection:proj:mpegnr" }
Switch proj_xvcolor "x.v.Color" { channel = "sonyprojector:ethernetconnection:proj:xvcolor" }
Switch proj_picturemuting "Picture Muting" { channel = "sonyprojector:ethernetconnection:proj:picturemuting" }
String proj_aspect "Aspect Ratio [%s]" { channel = "sonyprojector:ethernetconnection:proj:aspect" }
Switch proj_overscan "Overscan" { channel = "sonyprojector:ethernetconnection:proj:overscan" }
String proj_pictureposition "Picture Position [%s]" { channel = "sonyprojector:ethernetconnection:proj:pictureposition" }
Number proj_lampusetime "Lamp Use Time [%d]" { channel = "sonyprojector:ethernetconnection:proj:lampusetime" }
Switch proj3_power "Power" { channel = "sonyprojector:serialconnection:proj3:power" }
String proj3_powerstate "Power State [%s]" { channel = "sonyprojector:serialconnection:proj3:powerstate" }
String proj3_input "Video Input [%s]" { channel = "sonyprojector:serialconnection:proj3:input" }
String proj3_calibrationpreset "Calibrated Preset [%s]" { channel = "sonyprojector:serialconnection:proj3:calibrationpreset" }
Dimmer proj3_contrast "Contrast [%d]" { channel = "sonyprojector:serialconnection:proj3:contrast" }
Dimmer proj3_brightness "Brightness [%d]" { channel = "sonyprojector:serialconnection:proj3:brightness" }
Dimmer proj3_color "Color [%d]" { channel = "sonyprojector:serialconnection:proj3:color" }
Dimmer proj3_hue "Hue [%d]" { channel = "sonyprojector:serialconnection:proj3:hue" }
Dimmer proj3_sharpness "Sharpness [%d]" { channel = "sonyprojector:serialconnection:proj3:sharpness" }
String proj3_colortemperature "Color Temperature [%s]" { channel = "sonyprojector:serialconnection:proj3:colortemperature" }
String proj3_irismode "Iris Mode [%s]" { channel = "sonyprojector:serialconnection:proj3:irismode" }
Dimmer proj3_irismanual "Iris Manual [%d]" { channel = "sonyprojector:serialconnection:proj3:irismanual" }
String proj3_irissensitivity "Iris Sensitivity [%s]" { channel = "sonyprojector:serialconnection:proj3:irissensitivity" }
String proj3_lampcontrol "Lamp Control [%s]" { channel = "sonyprojector:serialconnection:proj3:lampcontrol" }
String proj3_filmprojection "Film Projection [%s]" { channel = "sonyprojector:serialconnection:proj3:filmprojection" }
String proj3_motionenhancer "Motion Enhancer [%s]" { channel = "sonyprojector:serialconnection:proj3:motionenhancer" }
String proj3_contrastenhancer "Contrast Enhancer [%s]" { channel = "sonyprojector:serialconnection:proj3:contrastenhancer" }
String proj3_filmmode "Film Mode [%s]" { channel = "sonyprojector:serialconnection:proj3:filmmode" }
String proj3_gammacorrection "Gamma Correction [%s]" { channel = "sonyprojector:serialconnection:proj3:gammacorrection" }
String proj3_colorspace "Color Space [%s]" { channel = "sonyprojector:serialconnection:proj3:colorspace" }
String proj3_nr "Noise Reduction [%s]" { channel = "sonyprojector:serialconnection:proj3:nr" }
String proj3_blocknr "Block Noise Reduction [%s]" { channel = "sonyprojector:serialconnection:proj3:blocknr" }
String proj3_mosquitonr "Mosquito Noise Reduction [%s]" { channel = "sonyprojector:serialconnection:proj3:mosquitonr" }
String proj3_mpegnr "MPEG Noise Reduction [%s]" { channel = "sonyprojector:serialconnection:proj3:mpegnr" }
Switch proj3_xvcolor "x.v.Color" { channel = "sonyprojector:serialconnection:proj3:xvcolor" }
Switch proj3_picturemuting "Picture Muting" { channel = "sonyprojector:serialconnection:proj3:picturemuting" }
String proj3_aspect "Aspect Ratio [%s]" { channel = "sonyprojector:serialconnection:proj3:aspect" }
Switch proj3_overscan "Overscan" { channel = "sonyprojector:serialconnection:proj3:overscan" }
String proj3_pictureposition "Picture Position [%s]" { channel = "sonyprojector:serialconnection:proj3:pictureposition" }
Number proj3_lampusetime "Lamp Use Time [%d]" { channel = "sonyprojector:serialconnection:proj3:lampusetime" }
Switch proj4_power "Power" { channel = "sonyprojector:serialoveripconnection:proj4:power" }
String proj4_powerstate "Power State [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:powerstate" }
String proj4_input "Video Input [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:input" }
String proj4_calibrationpreset "Calibrated Preset [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:calibrationpreset" }
Dimmer proj4_contrast "Contrast [%d]" { channel = "sonyprojector:serialoveripconnection:proj4:contrast" }
Dimmer proj4_brightness "Brightness [%d]" { channel = "sonyprojector:serialoveripconnection:proj4:brightness" }
Dimmer proj4_color "Color [%d]" { channel = "sonyprojector:serialoveripconnection:proj4:color" }
Dimmer proj4_hue "Hue [%d]" { channel = "sonyprojector:serialoveripconnection:proj4:hue" }
Dimmer proj4_sharpness "Sharpness [%d]" { channel = "sonyprojector:serialoveripconnection:proj4:sharpness" }
String proj4_colortemperature "Color Temperature [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:colortemperature" }
String proj4_irismode "Iris Mode [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:irismode" }
Dimmer proj4_irismanual "Iris Manual [%d]" { channel = "sonyprojector:serialoveripconnection:proj4:irismanual" }
String proj4_irissensitivity "Iris Sensitivity [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:irissensitivity" }
String proj4_lampcontrol "Lamp Control [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:lampcontrol" }
String proj4_filmprojection "Film Projection [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:filmprojection" }
String proj4_motionenhancer "Motion Enhancer [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:motionenhancer" }
String proj4_contrastenhancer "Contrast Enhancer [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:contrastenhancer" }
String proj4_filmmode "Film Mode [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:filmmode" }
String proj4_gammacorrection "Gamma Correction [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:gammacorrection" }
String proj4_colorspace "Color Space [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:colorspace" }
String proj4_nr "Noise Reduction [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:nr" }
String proj4_blocknr "Block Noise Reduction [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:blocknr" }
String proj4_mosquitonr "Mosquito Noise Reduction [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:mosquitonr" }
String proj4_mpegnr "MPEG Noise Reduction [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:mpegnr" }
Switch proj4_xvcolor "x.v.Color" { channel = "sonyprojector:serialoveripconnection:proj4:xvcolor" }
Switch proj4_picturemuting "Picture Muting" { channel = "sonyprojector:serialoveripconnection:proj4:picturemuting" }
String proj4_aspect "Aspect Ratio [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:aspect" }
Switch proj4_overscan "Overscan" { channel = "sonyprojector:serialoveripconnection:proj4:overscan" }
String proj4_pictureposition "Picture Position [%s]" { channel = "sonyprojector:serialoveripconnection:proj4:pictureposition" }
Number proj4_lampusetime "Lamp Use Time [%d]" { channel = "sonyprojector:serialoveripconnection:proj4:lampusetime" }
```
example.sitemap:
```perl
Frame label="Projector" {
Switch item=proj_power
Text item=proj_powerstate
Switch item=proj_input
Selection item=proj_calibrationpreset
Slider item=proj_contrast
Slider item=proj_brightness
Slider item=proj_color
Slider item=proj_hue
Slider item=proj_sharpness
Selection item=proj_colortemperature
Selection item=proj_irismode
Slider item=proj_irismanual
Switch item=proj_irissensitivity
Switch item=proj_lampcontrol
Switch item=proj_filmprojection
Switch item=proj_motionenhancer
Switch item=proj_contrastenhancer
Switch item=proj_filmmode
Selection item=proj_gammacorrection
Selection item=proj_colorspace
Switch item=proj_nr
Switch item=proj_blocknr
Switch item=proj_mosquitonr
Switch item=proj_mpegnr
Switch item=proj_xvcolor
Switch item=proj_picturemuting
Selection item=proj_aspect
Switch item=proj_overscan
Selection item=proj_pictureposition
Text item=proj_lampusetime
}
Frame label="Projector" {
Switch item=proj3_power
Text item=proj3_powerstate
Switch item=proj3_input
Selection item=proj3_calibrationpreset
Slider item=proj3_contrast
Slider item=proj3_brightness
Slider item=proj3_color
Slider item=proj3_hue
Slider item=proj3_sharpness
Selection item=proj3_colortemperature
Selection item=proj3_irismode
Slider item=proj3_irismanual
Switch item=proj3_irissensitivity
Switch item=proj3_lampcontrol
Switch item=proj3_filmprojection
Switch item=proj3_motionenhancer
Switch item=proj3_contrastenhancer
Switch item=proj3_filmmode
Selection item=proj3_gammacorrection
Selection item=proj3_colorspace
Switch item=proj3_nr
Switch item=proj3_blocknr
Switch item=proj3_mosquitonr
Switch item=proj3_mpegnr
Switch item=proj3_xvcolor
Switch item=proj3_picturemuting
Selection item=proj3_aspect
Switch item=proj3_overscan
Selection item=proj3_pictureposition
Text item=proj3_lampusetime
}
Frame label="Projector" {
Switch item=proj4_power
Text item=proj4_powerstate
Switch item=proj4_input
Selection item=proj4_calibrationpreset
Slider item=proj4_contrast
Slider item=proj4_brightness
Slider item=proj4_color
Slider item=proj4_hue
Slider item=proj4_sharpness
Selection item=proj4_colortemperature
Selection item=proj4_irismode
Slider item=proj4_irismanual
Switch item=proj4_irissensitivity
Switch item=proj4_lampcontrol
Switch item=proj4_filmprojection
Switch item=proj4_motionenhancer
Switch item=proj4_contrastenhancer
Switch item=proj4_filmmode
Selection item=proj4_gammacorrection
Selection item=proj4_colorspace
Switch item=proj4_nr
Switch item=proj4_blocknr
Switch item=proj4_mosquitonr
Switch item=proj4_mpegnr
Switch item=proj4_xvcolor
Switch item=proj4_picturemuting
Selection item=proj4_aspect
Switch item=proj4_overscan
Selection item=proj4_pictureposition
Text item=proj4_lampusetime
}
```
Reference in New Issue View Git Blame Copy Permalink