mirror of
https://github.com/openhab/openhab-addons.git
synced 2025-01-10 15:11:59 +01:00
85b165208c
* Make Markdown code block languages consistent Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk> * Fix indentation Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk> --------- Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
379 lines
29 KiB
Markdown
379 lines
29 KiB
Markdown
# AVM FRITZ! Binding
|
|
|
|
The binding integrates AVM FRITZ!Boxes with a special focus on the AHA ([AVM Home Automation](https://avm.de/ratgeber/filter/smart-home/)) features.
|
|
|
|
|
|
|
|
## Supported Things
|
|
|
|
### FRITZ!Box
|
|
|
|
FRITZ!Boxes (thing type `fritzbox`) are supported as bridges and they offer channels for call monitoring.
|
|
To activate the call monitor interface on a FRITZ!Box, you need to dial once `#96*5*` on a connected telephone.
|
|
You should hear a short audio signal as confirmation.
|
|
This procedure opens TCP/IP port 1012 on your FRITZ!Box.
|
|
(It can be deactivated again by dialing `#96*4*`.)
|
|
You can test if everything is working with the Telnet program from your openHAB server:
|
|
|
|
```shell
|
|
telnet fritz.box 1012
|
|
```
|
|
|
|
If you see an output like this:
|
|
|
|
```shell
|
|
Trying 192.168.178.1...
|
|
Connected to fritz.box.
|
|
Escape character is '^]'.
|
|
```
|
|
|
|
then it successfully connected to the call monitor.
|
|
If not, please make sure that the target openHAB system does not block the port on its firewall.
|
|
|
|
Additionally, they serve as a bridge for accessing other AHA devices.
|
|
For AHA functionality, the router has to run at least on firmware FRITZ!OS 6.00 and it has to support the "Smart Home" service.
|
|
|
|
### FRITZ!DECT 200 / FRITZ!DECT 210
|
|
|
|
This switchable outlets [FRITZ!DECT 210](https://avm.de/produkte/fritzdect/fritzdect-210/) and [FRITZ!DECT 200](https://avm.de/produkte/fritzdect/fritzdect-200/) have to be connected to a FRITZ!Box by DECT protocol.
|
|
They support switching the outlet and reading the current power, current voltage, accumulated energy consumption and temperature.
|
|
**NOTE:** The `voltage` channel will be added to the thing during runtime - if the interface supports it (FRITZ!OS 7 or higher).
|
|
|
|
### FRITZ!DECT Repeater 100
|
|
|
|
This [DECT repeater](https://avm.de/produkte/fritzdect/fritzdect-repeater-100/) has to be connected to a FRITZ!Box by DECT protocol.
|
|
It only supports temperature readings.
|
|
|
|
### FRITZ!Powerline 546E
|
|
|
|
This [powerline adapter](https://avm.de/produkte/fritzpowerline/) can be used via the bridge or in stand-alone mode.
|
|
It supports switching the outlet and reading the current power, current voltage and accumulated energy consumption.
|
|
This device does not contain a temperature sensor.
|
|
**NOTE:** The `voltage` channel will be added to the thing during runtime - if the interface supports it (FRITZ!OS 7 or higher).
|
|
|
|
### FRITZ!DECT 302 / FRITZ!DECT 301 / FRITZ!DECT 300 / Comet DECT
|
|
|
|
These devices [FRITZ!DECT 302](https://avm.de/produkte/fritzdect/fritzdect-302/), [FRITZ!DECT 301](https://avm.de/produkte/fritzdect/fritzdect-301/), FRITZ!DECT 300 and [Comet DECT](https://eurotronic.org/produkte/dect-ule-heizkoerperthermostat/comet-dect/) ([EUROtronic Technology GmbH](https://eurotronic.org/)) are used to regulate radiators via DECT-ULE protocol.
|
|
The FRITZ!Box can handle up to twelve heating thermostats.
|
|
The binding provides channels for reading and setting the temperature.
|
|
Additionally you can check the eco temperature, the comfort temperature and the battery level of the device.
|
|
The FRITZ!Box has to run at least on firmware FRITZ!OS 6.35.
|
|
**NOTE:** The `battery_level` channel will be added to the thing during runtime - if the interface supports it (FRITZ!OS 7 or higher).
|
|
|
|
### FRITZ!DECT 400 / FRITZ!DECT 440
|
|
|
|
The [FRITZ!DECT 400](https://avm.de/produkte/fritzdect/fritzdect-400/) and [FRITZ!DECT 440](https://avm.de/produkte/fritzdect/fritzdect-440/) are buttons for convenient operation of FRITZ! Smart Home devices (FRITZ!OS 7.08 or higher for FRITZ!DECT 400, 7.20 or higher for FRITZ!DECT 440).
|
|
The FRITZ!DECT 400 supports a configurable button to trigger short or long press events.
|
|
Beside four customizable buttons the FRITZ!DECT 440 supports temperature readings.
|
|
**NOTE:** FRITZ!DECT 440 now uses Channel Groups to group its Channels like `device#battery_level`, `device#battery_low` for device information, `sensors#temperature` for sensor data and `top-left`, `bottom-left`, `top-right` and `bottom-right` combined with `press` and `last_change` (see [Full Example](#full-example))
|
|
|
|
### FRITZ!DECT 500
|
|
|
|
The [FRITZ!DECT 500](https://avm.de/produkte/fritzdect/fritzdect-500/) is a dimmable colorized light bulb.
|
|
|
|
#### Supported Channel Groups
|
|
|
|
| Channel Group ID | Description | Available on thing |
|
|
|--------------------------------------------------------|---------------------|--------------------|
|
|
| `device` | Device information. | FRITZ!DECT 440 |
|
|
| `sensors` | Sensor data. | FRITZ!DECT 440 |
|
|
| `top-left`, `bottom-left`, `top-right`, `bottom-right` | Button and trigger. | FRITZ!DECT 440 |
|
|
|
|
### DECT-ULE / HAN-FUN Devices
|
|
|
|
The following sensors have been successfully tested using FRITZ!OS 7 for FRITZ!Box 7490 / 7590:
|
|
|
|
- [SmartHome Tür-/Fensterkontakt (optisch)](https://www.smarthome.de/geraete/eurotronic-smarthome-tuer-fensterkontakt-optisch) - an optical door/window contact (thing type `HAN_FUN_CONTACT`)
|
|
- [SmartHome Tür-/Fensterkontakt (magnetisch)](https://www.smarthome.de/geraete/smarthome-tuer-fensterkontakt-magnetisch-weiss) - a magnetic door/window contact (thing type `HAN_FUN_CONTACT`)
|
|
- [SmartHome Bewegungsmelder](https://www.smarthome.de/geraete/telekom-smarthome-bewegungsmelder-innen) - a motion sensor (thing type `HAN_FUN_CONTACT`)
|
|
- [SmartHome Rauchmelder](https://www.smarthome.de/geraete/smarthome-rauchmelder-weiss) - a smoke detector (thing type `HAN_FUN_CONTACT`)
|
|
- [SmartHome Wandtaster](https://www.smarthome.de/geraete/telekom-smarthome-wandtaster) - a switch with two buttons (thing type `HAN_FUN_SWITCH`)
|
|
- [SmartHome Zwischenstecker innen](https://www.smarthome.de/geraete/smarthome-zwischenstecker-innen-weiss) - a switchable indoor outlet (thing type `HAN_FUN_ON_OFF`)
|
|
- [SmartHome Zwischenstecker außen](https://www.smarthome.de/geraete/smarthome-zwischenstecker-aussen-schwarz) - a switchable outdoor outlet (thing type `HAN_FUN_ON_OFF`)
|
|
- [Rollotron DECT 1213](https://www.rademacher.de/shop/rollladen-sonnenschutz/elektrischer-gurtwickler/rollotron-dect-1213) - an electronic belt winder (thing type `HAN_FUN_BLINDS`)
|
|
- [Becker BoxCTRL](https://becker-antriebe.shop/) - a radio controlled roller shutter drive (thing type `HAN_FUN_BLINDS`)
|
|
- SmartHome LED-Lampe E27 (farbig) - a dimmable colorized light bulb (thing type `HAN_FUN_COLOR_BULB`)
|
|
- SmartHome LED-Lampe E27 (warmweiß) - a dimmable light bulb (thing type `HAN_FUN_DIMMABLE_BULB`)
|
|
|
|
The use of other Sensors should be possible, if these are compatible with DECT-ULE / HAN-FUN standards.
|
|
|
|
The FRITZ!Box has to run at least on firmware FRITZ!OS 7.
|
|
|
|
### FRITZ! Groups
|
|
|
|
The FRITZ!OS supports two different types of groups.
|
|
On the one hand there are groups for heating thermostats on the other hand there are groups for switchable outlets and power meters.
|
|
The first one provides the same channels and actions like the [FRITZ!DECT 302 / FRITZ!DECT 301 / FRITZ!DECT 300 / Comet DECT](https://www.openhab.org/addons/bindings/avmfritz/#fritz-dect-302-fritz-dect-301-fritz-dect-300-comet-dect) devices.
|
|
The latter provides the same channels like the [FRITZ!DECT 200 / FRITZ!DECT 210](https://www.openhab.org/addons/bindings/avmfritz/#fritz-dect-200-fritz-dect-210) / [FRITZ!Powerline 546E](https://www.openhab.org/addons/bindings/avmfritz/#fritz-powerline-546e) devices.
|
|
The FRITZ!Box has to run at least on firmware FRITZ!OS 6.69.
|
|
|
|
## Discovery
|
|
|
|
The FRITZ!Box and the powerline adapter are discovered through UPnP in the local network.
|
|
When added as things, a username/password has eventually to be set depending on your Box/Powerline security configuration.
|
|
The credentials given in the settings must have HomeAuto permissions.
|
|
This implies to enable "login to the home network with user name and password" setting in the FRITZ!Box.
|
|
To do so
|
|
|
|
- Click "System" in the FRITZ!Box user interface.
|
|
- Click "FRITZ!Box Users" in the "System" menu.
|
|
- Click on the "Login to the Home Network" tab.
|
|
- Enable the option "Login with FRITZ!Box user name and password".
|
|
- Click "Apply" to save the settings.
|
|
|
|
**NOTE:** Now you can only log in to the FRITZ!Box with a user account, i.e. after entering a user name and password.
|
|
|
|
Auto-discovery is enabled by default.
|
|
To disable it, you can add the following line to `<openHAB-conf>/services/runtime.cfg`:
|
|
|
|
```ini
|
|
discovery.avmfritz:background=false
|
|
```
|
|
|
|
If correct credentials are set in the bridge configuration, connected AHA devices are discovered automatically (may last up to 3 minutes).
|
|
|
|
## Thing Configuration
|
|
|
|
### FRITZ!Box
|
|
|
|
- `ipAddress` (mandatory), default "fritz.box"
|
|
- `protocol` (optional, "http" or "https"), default "http"
|
|
- `port` (optional, 1 to 65535), no default (derived from protocol: 80 or 443)
|
|
- `password` (optional for call monitoring, but mandatory for AHA features), no default (depends on FRITZ!Box security configuration)
|
|
- `user` (optional), no default (depends on FRITZ!Box security configuration)
|
|
- `pollingInterval` (optional, 1 to 60), default 15 (in seconds)
|
|
- `asyncTimeout` (optional, 1000 to 60000), default 10000 (in milliseconds)
|
|
- `syncTimeout` (optional, 500 to 15000), default 2000 (in milliseconds)
|
|
|
|
### FRITZ!Powerline 546E
|
|
|
|
- `ain` (optional, advanced), no default (AIN number of the device)
|
|
- `ipAddress` (mandatory), default "fritz.powerline"
|
|
- `protocol` (optional, "http" or "https"), default "http"
|
|
- `port` (optional, 1 to 65535), no default (derived from protocol: 80 or 443)
|
|
- `password` (optional), no default (depends on FRITZ!Powerline security configuration)
|
|
- `pollingInterval` (optional, 1 to 60), default 15 (in seconds)
|
|
- `asyncTimeout` (optional, 1000 to 60000), default 10000 (in milliseconds)
|
|
- `syncTimeout` (optional, 500 to 15000), default 2000 (in milliseconds)
|
|
|
|
If the FRITZ!Powerline 546E is added via auto-discovery it determines its own `ain`, otherwise you have to configure it manually.
|
|
|
|
### Things Connected To FRITZ!Box Or FRITZ!Powerline 546E
|
|
|
|
- `ain` (mandatory), no default (AIN number of the device)
|
|
|
|
### Finding The AIN
|
|
|
|
The AIN (actor identification number) can be found in the FRITZ!Box interface -> Home Network -> SmartHome. When opening the details view for a device with the edit button, the AIN is shown. Use the AIN without the blank.
|
|
|
|
## Supported Channels
|
|
|
|
| Channel Type ID | Item Type | Description | Available on thing |
|
|
|-----------------------|--------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------|
|
|
| incoming_call | Call | Details about incoming call. %2$s contains the external, calling number, %1$s is the internal, receiving number. | FRITZ!Box |
|
|
| outgoing_call | Call | Details about outgoing call. %1$s contains the external, called number, %2$s is the internal, calling number. | FRITZ!Box |
|
|
| active_call | Call | Details about active call. %1$s contains the external, calling number, %2$s is empty. | FRITZ!Box |
|
|
| call_state | String | Details about current call state, either IDLE, RINGING, DIALING or ACTIVE. | FRITZ!Box |
|
|
| apply_template | String | Apply template for device(s) (channel's state options contains available templates, for an alternative way see the description below) - FRITZ!OS 7 | FRITZ!Box, FRITZ!Powerline 546E |
|
|
| mode | String | States the mode of the device (MANUAL/AUTOMATIC/VACATION) | FRITZ!DECT 210, FRITZ!DECT 200, FRITZ!Powerline 546E, FRITZ!DECT 30x, Comet DECT |
|
|
| locked | Contact | Device is locked for switching over external sources (OPEN/CLOSE) | FRITZ!DECT 210, FRITZ!DECT 200, FRITZ!Powerline 546E, FRITZ!DECT 30x, Comet DECT |
|
|
| device_locked | Contact | Device is locked for switching manually (OPEN/CLOSE) - FRITZ!OS 6.90 | FRITZ!DECT 210, FRITZ!DECT 200, FRITZ!Powerline 546E, FRITZ!DECT 30x, Comet DECT |
|
|
| temperature | Number:Temperature | Current measured temperature | FRITZ!DECT 210, FRITZ!DECT 200, FRITZ!DECT Repeater 100, FRITZ!DECT 30x, Comet DECT, FRITZ!DECT 440 |
|
|
| humidity | Number:Dimensionless | Current measured humidity - FRITZ!OS 7.24 | FRITZ!DECT 440 |
|
|
| energy | Number:Energy | Accumulated energy consumption | FRITZ!DECT 210, FRITZ!DECT 200, FRITZ!Powerline 546E |
|
|
| power | Number:Power | Current power consumption | FRITZ!DECT 210, FRITZ!DECT 200, FRITZ!Powerline 546E |
|
|
| voltage | Number:ElectricPotential | Current voltage - FRITZ!OS 7 | FRITZ!DECT 210, FRITZ!DECT 200, FRITZ!Powerline 546E |
|
|
| outlet | Switch | Switchable outlet (ON/OFF) | FRITZ!DECT 210, FRITZ!DECT 200, FRITZ!Powerline 546E |
|
|
| on_off | Switch | Switchable device (ON/OFF) | HAN_FUN_ON_OFF |
|
|
| brightness | Dimmer | Dimmable lights | HAN_FUN_DIMMABLE_BULB |
|
|
| color | Color | Color lights | FRITZ!DECT 500, HAN_FUN_COLOR_BULB |
|
|
| color_temperature | Dimmer | Color temperature of lights in *white mode* | FRITZ!DECT 500, HAN_FUN_COLOR_BULB |
|
|
| color_temperature_abs | Number:Temperature | Color temperature of lights in *white mode* in Kelvin **Advanced** | FRITZ!DECT 500, HAN_FUN_COLOR_BULB |
|
|
| actual_temp | Number:Temperature | Current temperature of heating thermostat | FRITZ!DECT 30x, Comet DECT |
|
|
| set_temp | Number:Temperature | Set Temperature of heating thermostat | FRITZ!DECT 30x, Comet DECT |
|
|
| eco_temp | Number:Temperature | Eco Temperature of heating thermostat | FRITZ!DECT 30x, Comet DECT |
|
|
| comfort_temp | Number:Temperature | Comfort Temperature of heating thermostat | FRITZ!DECT 30x, Comet DECT |
|
|
| radiator_mode | String | Mode of heating thermostat (ON/OFF/COMFORT/ECO/BOOST/WINDOW_OPEN) | FRITZ!DECT 30x, Comet DECT |
|
|
| next_change | DateTime | Next change of the Set Temperature if scheduler is activated in the FRITZ!Box settings - FRITZ!OS 6.80 | FRITZ!DECT 30x, Comet DECT |
|
|
| next_temp | Number:Temperature | Next Set Temperature if scheduler is activated in the FRITZ!Box settings - FRITZ!OS 6.80 | FRITZ!DECT 30x, Comet DECT |
|
|
| battery_level | Number | Battery level (in %) - FRITZ!OS 7 | FRITZ!DECT 30x, Comet DECT, FRITZ!DECT 400, FRITZ!DECT 440 |
|
|
| battery_low | Switch | Battery level low (ON/OFF) - FRITZ!OS 6.80 | FRITZ!DECT 30x, Comet DECT, FRITZ!DECT 400, FRITZ!DECT 440 |
|
|
| contact_state | Contact | Contact state information (OPEN/CLOSED). | HAN-FUN contact (e.g. SmartHome Tür-/Fensterkontakt or SmartHome Bewegungsmelder)- FRITZ!OS 7 |
|
|
| last_change | DateTime | States the last time the button was pressed. | FRITZ!DECT 400, FRITZ!DECT 440, HAN-FUN switch (e.g. SmartHome Wandtaster) - FRITZ!OS 7 |
|
|
| rollershutter | Rollershutter | Rollershutter control and status. Accepts UP/DOWN/STOP commands and the opening level in percent. States the opening level in percent. | HAN-FUN blind (e.g. Rolltron DECT 1213) - FRITZ!OS 7 |
|
|
| obstruction_alarm | Obstruction Alarm | Rollershutter obstruction alarm (ON/OFF) | HAN-FUN blind (e.g. Rolltron DECT 1213) - FRITZ!OS 7 |
|
|
| temperature_alarm | Temperature Alarm | Rollershutter temperature alarm (ON/OFF) | HAN-FUN blind (e.g. Rolltron DECT 1213) - FRITZ!OS 7 |
|
|
|
|
### Triggers
|
|
|
|
| Channel Type ID | Item Type | Description | Available on thing |
|
|
|-----------------|-----------|--------------------------------------------------------------------------------|-----------------------------------------------------------|
|
|
| press | Trigger | Dispatches a `PRESSED` event when a button is pressed. | FRITZ!DECT440, HAN-FUN switch (e.g. SmartHome Wandtaster) |
|
|
| press | Trigger | Dispatches a `SHORT_PRESSED` or `LONG_PRESSED` event when a button is pressed. | FRITZ!DECT 400 |
|
|
|
|
The trigger channel `press` for a FRITZ!DECT 440 device or HAN-FUN switch is of type `system.rawbutton` to allow the usage of the `rawbutton-toggle-switch` profile.
|
|
The trigger channel `press` for a FRITZ!DECT 400 device is of type `system.button`.
|
|
|
|
### FRITZ! Smart Home Templates
|
|
|
|
With the new [templates feature](https://en.avm.de/guide/smart-home/meet-the-smart-home-templates-from-fritz/) in FRITZ!OS 7, you can now save the settings of your Smart Home devices and groups as a template for certain occasions e.g. holidays or vacation.
|
|
Unfortunately it is not that simple to find out the unique identifier (AIN) for a template needed for sending it as command to the `apply_template` channel.
|
|
Here is a work-around:
|
|
To retrieve the list of AINs assigned by FRITZ! for your templates, go to the FRITZ!Box' Support page at [http://fritz.box/html/support.html](http://fritz.box/html/support.html) within your local network and login.
|
|
Then in the section "Support Data" ("Support-Daten") press the button "Create Support Data" ("Support-Daten erstellen") and save the generated text file.
|
|
Open the file in a text editor and search for the term "avm_home_device_type_template".
|
|
You will find entries like the attached one.
|
|
The `identifyer 'tmpFC0F2C-3960B7EE6'` contains the templates AINs you need for using them in rules.
|
|
|
|
```text
|
|
Name 'Demo Template', identifyer 'tmpFC0F2C-3960B7EE6', firmware version '0.1'
|
|
[aktive] ID 60013, emc 0x0, model 0x0, grouphash=0x0, devicetype 'avm_home_device_type_template', functionbitmask 0x4000, sortid 0, batt perc 255 low 255, pollinterval 0, polltimeout 0, validchangetime: 0
|
|
--------------------
|
|
```
|
|
|
|
templates.rules
|
|
|
|
```java
|
|
rule "Apply template"
|
|
when
|
|
...
|
|
then
|
|
ApplyTemplate.sendCommand("tmpFC0F2C-3960B7EE6")
|
|
end
|
|
```
|
|
|
|
### Actions
|
|
|
|
For heating devices and heating groups there are two actions available to set Boost or Window Open mode for a given duration: `setBoostMode(long)` and `setWindowOpenMode(long)`.
|
|
The duration has to be given in seconds, min. 1, max. 86400, 0 for deactivation.
|
|
|
|
```java
|
|
val actions = getActions("avmfritz","avmfritz:Comet_DECT:1:aaaaaabbbbbb")
|
|
|
|
// set Boost mode for 5 min
|
|
actions.setBoostMode(300)
|
|
```
|
|
|
|
## Full Example
|
|
|
|
demo.things:
|
|
|
|
```java
|
|
Bridge avmfritz:fritzbox:1 "FRITZ!Box" [ ipAddress="192.168.x.x", password="xxx", user="xxx" ] {
|
|
Thing FRITZ_DECT_440 vvvvvvvvvvvv "FRITZ!DECT 440 #15" [ ain="vvvvvvvvvvvv" ]
|
|
Thing FRITZ_DECT_200 xxxxxxxxxxxx "FRITZ!DECT 200 #1" [ ain="xxxxxxxxxxxx" ]
|
|
Thing FRITZ_Powerline_546E yy_yy_yy_yy_yy_yy "FRITZ!Powerline 546E #2" [ ain="yy:yy:yy:yy:yy:yy" ]
|
|
Thing Comet_DECT aaaaaabbbbbb "Comet DECT #3" [ ain="aaaaaabbbbbb" ]
|
|
Thing HAN_FUN_CONTACT zzzzzzzzzzzz_1 "HAN-FUN Contact #4" [ ain="zzzzzzzzzzzz-1" ]
|
|
Thing HAN_FUN_SWITCH zzzzzzzzzzzz_2 "HAN-FUN Switch #5" [ ain=zzzzzzzzzzzz-2" ]
|
|
Thing FRITZ_DECT_Repeater_100 rrrrrrrrrrrr "DECT Repeater 100 #6" [ ain="rrrrrrrrrrrr" ]
|
|
Thing FRITZ_GROUP_HEATING AA_AA_AA_900 "Heating group" [ ain="AA:AA:AA-900" ]
|
|
Thing FRITZ_GROUP_SWITCH BB_BB_BB_900 "Switch group" [ ain="BB:BB:BB-900" ]
|
|
}
|
|
```
|
|
|
|
demo.items:
|
|
|
|
```java
|
|
String CallState "Call State [%s]" { channel="avmfritz:fritzbox:1:call_state" }
|
|
Call IncomingCall "Incoming call: [%1$s to %2$s]" { channel="avmfritz:fritzbox:1:incoming_call" }
|
|
Call OutgoingCall "Outgoing call: [%1$s to %2$s]" { channel="avmfritz:fritzbox:1:outgoing_call" }
|
|
Call ActiveCall "Call established [%1$s]" { channel="avmfritz:fritzbox:1:active_call" }
|
|
String ApplyTemplate "Apply template" { channel="avmfritz:fritzbox:1:apply_template" }
|
|
|
|
Number:Temperature SwitchTemperature "Current measured temperature [%.1f %unit%]" { channel="avmfritz:FRITZ_DECT_440:1:vvvvvvvvvvvv:sensors#temperature" }
|
|
Number SwitchBatteryLevel "Battery level" { channel="avmfritz:FRITZ_DECT_440:1:vvvvvvvvvvvv:device#battery_level" }
|
|
Switch SwitchBatteryLow "Battery low" { channel="avmfritz:FRITZ_DECT_440:1:vvvvvvvvvvvv:device#battery_low" }
|
|
DateTime TopLeftSwitchLastChanged "Last change" { channel="avmfritz:FRITZ_DECT_440:1:vvvvvvvvvvvv:top-left#last_change" }
|
|
DateTime BottomLeftSwitchLastChanged "Last change" { channel="avmfritz:FRITZ_DECT_440:1:vvvvvvvvvvvv:bottom-left#last_change" }
|
|
DateTime TopRightSwitchLastChanged "Last change" { channel="avmfritz:FRITZ_DECT_440:1:vvvvvvvvvvvv:top-right#last_change" }
|
|
DateTime BottomRightSwitchLastChanged "Last change" { channel="avmfritz:FRITZ_DECT_440:1:vvvvvvvvvvvv:bottom-right#last_change" }
|
|
|
|
Switch Outlet1 "Switchable outlet" { channel="avmfritz:FRITZ_DECT_200:1:xxxxxxxxxxxx:outlet" }
|
|
Number:Temperature Temperature1 "Current measured temperature [%.1f %unit%]" { channel="avmfritz:FRITZ_DECT_200:1:xxxxxxxxxxxx:temperature" }
|
|
Number:Energy Energy1 "Accumulated energy consumption [%.3f kWh]" { channel="avmfritz:FRITZ_DECT_200:1:xxxxxxxxxxxx:energy" }
|
|
Number:Power Power1 "Current power consumption [%.2f %unit%]" { channel="avmfritz:FRITZ_DECT_200:1:xxxxxxxxxxxx:power" }
|
|
Number:ElectricPotential Voltage1 "Current voltage [%.1f %unit%]" { channel="avmfritz:FRITZ_DECT_200:1:xxxxxxxxxxxx:voltage" }
|
|
|
|
Switch Outlet2 "Switchable outlet" { channel="avmfritz:FRITZ_Powerline_546E:1:yy_yy_yy_yy_yy_yy:outlet" }
|
|
|
|
Number:Temperature COMETDECTTemperature "Current measured temperature [%.1f %unit%]" { channel="avmfritz:Comet_DECT:1:aaaaaabbbbbb:actual_temp" }
|
|
Number:Temperature COMETDECTSetTemperature "Thermostat temperature set point [%.1f %unit%]" { channel="avmfritz:Comet_DECT:1:aaaaaabbbbbb:set_temp" }
|
|
String COMETDECTRadiatorMode "Radiator mode [%s]" { channel="avmfritz:Comet_DECT:1:aaaaaabbbbbb:radiator_mode" }
|
|
Number COMETDECTBattery "Battery level" { channel="avmfritz:Comet_DECT:1:aaaaaabbbbbb:battery_level" }
|
|
Switch COMETDECTBatteryLow "Battery low" { channel="avmfritz:Comet_DECT:1:aaaaaabbbbbb:battery_low" }
|
|
|
|
Contact HANFUNContactState "Status [%s]" { channel="avmfritz:HAN_FUN_CONTACT:1:zzzzzzzzzzzz_1:contact_state" }
|
|
|
|
DateTime HANFUNSwitchLastChanged "Last change" { channel="avmfritz:HAN_FUN_SWITCH:1:zzzzzzzzzzzz_2:last_change" }
|
|
|
|
Number:Temperature Temperature1 "Current measured temperature [%.1f %unit%]" { channel="avmfritz:FRITZ_DECT_Repeater_100:1:rrrrrrrrrrrr:temperature" }
|
|
|
|
Number:Temperature FRITZ_GROUP_HEATINGSetTemperature "Group temperature set point [%.1f %unit%]" { channel="avmfritz:FRITZ_GROUP_HEATING:1:AA_AA_AA_900:set_temp" }
|
|
|
|
Switch Outlet3 "Group switch" { channel="avmfritz:FRITZ_GROUP_SWITCH:1:BB_BB_BB_900:outlet" }
|
|
```
|
|
|
|
demo.sitemap:
|
|
|
|
```java
|
|
sitemap demo label="Main Menu" {
|
|
|
|
Frame label="FRITZ!Box" {
|
|
Text item=CallState
|
|
Text item=IncomingCall
|
|
Text item=OutgoingCall
|
|
Text item=ActiveCall
|
|
Selection item=ApplyTemplate
|
|
}
|
|
|
|
Frame label="FRITZ!DECT 200 switchable outlet" {
|
|
Switch item=Outlet1 icon="poweroutlet"
|
|
Text item=Temperature1 icon="temperature"
|
|
Text item=Energy1 icon="energy"
|
|
Text item=Power1 icon="energy"
|
|
Text item=Voltage1 icon="energy"
|
|
}
|
|
|
|
Frame label="FRITZ!Powerline 546E switchable outlet" {
|
|
Switch item=Outlet2 icon="poweroutlet"
|
|
}
|
|
|
|
Frame label="Comet DECT heating thermostat" {
|
|
Text item=COMETDECTTemperature icon="temperature"
|
|
Setpoint item=COMETDECTSetTemperature minValue=8.0 maxValue=28.0 step=0.5 icon="temperature"
|
|
Selection item=COMETDECTRadiatorMode mappings=["ON"="ON", "OFF"="OFF", "COMFORT"="COMFORT", "ECO"="ECO", "BOOST"="BOOST"] icon="heating"
|
|
Text item=COMETDECTBattery icon="battery"
|
|
Switch item=COMETDECTBatteryLow icon="lowbattery"
|
|
}
|
|
|
|
Frame label="HAN-FUN Contact" {
|
|
Text item=HANFUNContactState
|
|
}
|
|
|
|
Frame label="HAN-FUN Switch" {
|
|
Text item=HANFUNSwitchLastChanged
|
|
}
|
|
}
|
|
```
|
|
|
|
demo.rules:
|
|
|
|
```java
|
|
rule "FRITZ!DECT 440 Top Left Button pressed"
|
|
when
|
|
Channel "avmfritz:FRITZ_DECT_440:1:vvvvvvvvvvvv:top-left#press" triggered PRESSED
|
|
then
|
|
logInfo("demo", "Top Left Button pressed")
|
|
end
|
|
```
|
|
|
|
```java
|
|
rule "HAN-FUN Button pressed"
|
|
when
|
|
Channel "avmfritz:HAN_FUN_SWITCH:1:zzzzzzzzzzzz_2:press" triggered
|
|
then
|
|
logInfo("demo", "Button pressed")
|
|
end
|
|
```
|