* [rotel] Add missed command to switch between ProLogic modes
All models using the HEX protocol are concerned.
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* Optimize API calls for reduced load
* Add position tracking (on map)
* Provide faster updates when active
* Optimize state update after triggering commands
* Clean up duration variables
* Add initial test coverage for DeviceStatus
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* Move test providers to dedicated folder
* Simplify resource loading
* Clarify what is being tested
* Extract online communication test to separate class
* Fix SAT findings
* Rename variable to comply with naming convention
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
support. In general Gen1 and Gen2 devices have a total different API so
I spliced the API code in version/gen 1 and 2. This means restructuring
the classes (e.h. api+coap became api+api1+api2) and therefor dummy
changes in the code, e.g. import statements. This creates a lot of
overhead and separating those "dummy changes" simplifies merging the
actual PR.
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Refresh cutting times right after next planned cutting
* Cancel cutting time future unconditionally
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [fineoffsetweatherstation] add support for ELV protocol
* [fineoffsetweatherstation] remove german translations
* [fineoffsetweatherstation] add representationProperty for gateway, fix unit of irradiation-uv
* [fineoffsetweatherstation] add representationProperties in descriptor xml file
* [fineoffsetweatherstation] set channels values to undef in case of communication errors
* [fineoffsetweatherstation] use lock for request synchronisation
* [fineoffsetweatherstation] marke sensors as gone, if they got unpaired
resolves#12763
Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>
* Fix communication error when no planned next cutting
* Provide targeted handling of missing cutting times
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* [rotel] Add support of multiple zones (ASCII protocol)
Models C8 and C8+ (distribution amplifiers)
Code factorization.
Simulator updated.
* Set model/firmware thing properties (ASCII V2 protocol)
* Review comment: NumberOf rather than Nb
* Review comment: getZoneCommand: IllegalArgumentException if numZone is
outside 1-4
* Review comment: constant for volumeUpDown
* Simplification: method isPowerOn with numZone parameter (range 0-4)
* Review comment: fix for getPowerOffCommand
* Review comment: new method isZoneAvailable to factorize code
* Review comment: use MAX_NUMBER_OF_ZONES to check range validity
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
Separate Venstar thermostat API calls to change the away mode or
schedule-enabled mode so that the POST to the thermostat's REST
API settings endpoint contains only one of these two params.
Newer ColorTouch thermostat firmwares will reject any POSTs to the
settings endpoint that include the 'schedule' parameter when the
thermostat is currently in AWAY mode, regardless of the value
passed for 'schedule'. This had the effect of preventing the
OpenHab binding from un-setting away mode.
Signed-off-by: David Eberhart <git@daveeberhart.com>
* New translations astro.properties (Hungarian)
* New translations chromecast.properties (Hungarian)
* New translations darksky.properties (Hungarian)
* New translations coronastats.properties (Hungarian)
* New translations evohome.properties (Hungarian)
* New translations mcd.properties (Italian)
* New translations amazondashbutton.properties (Italian)
* New translations openwebnet.properties (Italian)
* New translations openhabcloud.properties (Italian)
* New translations voicerss.properties (Italian)
* New translations tado.properties (Italian)
* New translations wled.properties (Italian)
* New translations livisismarthome.properties (Italian)
* Allow hostname as gateway network address
* Document configuration parameters for things
* Add message for bridge communication error
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
* - new device types added
- min firmware set to 1.8.2
- unit for gas concentration fixed (ppm)
- Auto numbering on channel labels for groups with multiple instances
(add sequence suffix)
- API and Thing interfaces defined to restrict access to those classes
- fix on TRV boost update via CoAP
- fix for status.temperature and status.uptime, internalTemp channels
- don’t use meter timestamp if not present (RGBW2)
- low battery indicator for sensor devices fixed
- device detection based on model/type improved
- various messages/translations fixed/improved
- README updated (missing thing types added)
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* missing properties added
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* minor changes
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* markdown fixed
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017)
Signed-off-by: Markus Michels <markus7017@gmail.com>
* review changes applied
Signed-off-by: Markus Michels <markus7017@gmail.com>
* shelly_de.properties restored from main branch
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Switch to fork of gatt parser library in order to fix incompatibility with xstream
* Add SAT suppressions
* Add gson dependency
Signed-off-by: Kai Kreuzer <kai@openhab.org>
