* [pidcontroller] Remove limits, make Ki dependent from the loop time
Also fix naming of thread and shutdown executor.
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
* [dsmr] Fix handling problem reading gasmeter
The gasmeter seem to return an invalid date value in some cases.
Possible problems with the meter. This however caused the whole meter readings to be ignored, while it should only ignore the single problem value.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* [dsmr] Make eclipse happy again.
Don't ask...
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* [dsmr] Removed sat warnings
Removed usage of apache library and added NonNullByDefault to test classes..
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* [innogysmarthome] Bug-fix - NPE solved which could occur when devices without a corresponding device state were returned by the API. That happened with the virtual device "NotificationSender" which is unimportant for the binding.
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] JavaDoc fixed
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimizations (warnings fixed)
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code refactoring (InnogyClient class split to make it smaller)
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimization
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimization
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimization
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimization
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimization ; Potential bug with the reachable attribute solved (it was set multiple times within a loop)
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimization
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimization
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimization
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimization
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimization
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code optimization
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Tests added
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Tests added
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code changed to not overwrite the reachable state provided by the API (when no corresponding message is available)
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Copyright notice updated
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
* [innogysmarthome] Code and performance optimization
Signed-off-by: Sven Strohschein <sven.strohschein@gmail.com>
Co-authored-by: Sven Strohschein <sven.strohschein@gmail.com>
* add support qrcode based pairing
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* add screenshots
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* fix typo
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* update config only if differnt to prevent endless update loop
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* clean up
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* add support qrcode based pairing
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* add screenshots
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* fix typo
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* update config only if differnt to prevent endless update loop
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* clean up
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* incorporate review feedback
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* fix Nullable based on feedback
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* correct the java hap version
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* Update bundles/org.openhab.io.homekit/pom.xml
* adapt groupid
Signed-off-by: Eugen Freiter <freiter@gmx.de>
* incorporate review feedback
Signed-off-by: Eugen Freiter <freiter@gmx.de>
Co-authored-by: Eugen Freiter <freiter@gmx.de>
Co-authored-by: J-N-K <J-N-K@users.noreply.github.com>
* [openwebnet] Log messages cleanup
Signed-off-by: Massimo Valla <mvcode00@gmail.com>
* [openwebnet] Fixed normalizeWhere
* added builder for Bus Where addresses
* added messages to OwnIdTest
* depend on own4j 0.3.3-SNAPSHOT
Signed-off-by: Massimo Valla <mvcode00@gmail.com>
* [openwebnet] Discovery & reconnect for ZigBee USB gateways
* added mgmt of disconnect/reconnect of ZigBee USB Gateway from serial (#9170)
* added ZigBee USB Gateway auto discovery (#9171)
Signed-off-by: Massimo Valla <mvcode00@gmail.com>
* [openwebnet] fixed up/down automation for old fw (#9651)
* now using openwebnet4j 0.3.3 (nrjavaserial 5.2.1)
Signed-off-by: Massimo Valla <mvcode00@gmail.com>
* [openwebnet] Fixes lowering dimmers from 20 to 10% does not change device level #9317
- bump openwebnet4j to 0.3.4
Signed-off-by: Massimo Valla <mvcode00@gmail.com>
* [openwebnet] changes after PR review
Signed-off-by: Massimo Valla <mvcode00@gmail.com>
* [tr064] Normalize numbers in phone book entries.
Phone book numbers and numbers to be looked up might be formatted
differently (real world example: '+49 (12345) 67890' vs. '01234567890'
(where the former is phonebook formatting and the latter is the format
transmitted by the avmfritz binding). Make sure such formatting
differences do not cause lookup mismatches.
Signed-off-by: Danny Baumann <dannybaumann@web.de>
* add unit
Signed-off-by: Jan N. Klug <jan.n.klug@rub.de>
* documentation an XML
Signed-off-by: Jan N. Klug <jan.n.klug@rub.de>
* address review comments
Signed-off-by: Jan N. Klug <jan.n.klug@rub.de>
* improvements
Signed-off-by: Jan N. Klug <jan.n.klug@rub.de>
* improvements
Signed-off-by: Jan N. Klug <jan.n.klug@rub.de>
* added new channels and extra fixes
Signed-off-by: Benjamin Lafois <benjamin.lafois@gmail.com>
* wip
Signed-off-by: Benjamin Lafois <benjamin.lafois@gmail.com>
* added multiple channels
Signed-off-by: Benjamin Lafois <benjamin.lafois@gmail.com>
* fixes after PR comments
Signed-off-by: Benjamin Lafois <benjamin.lafois@gmail.com>
* added support for AUTO fan mode
Signed-off-by: Benjamin Lafois <benjamin.lafois@gmail.com>
* Fixes units
Signed-off-by: Benjamin Lafois <benjamin.lafois@gmail.com>
* Fix PR
Signed-off-by: Benjamin Lafois <benjamin.lafois@gmail.com>
* PR fixes
Signed-off-by: Benjamin Lafois <benjamin.lafois@gmail.com>
* PR fixes
Signed-off-by: Benjamin Lafois <benjamin.lafois@gmail.com>
* Fixed copyright 2020->2021
Signed-off-by: Benjamin Lafois <benjamin.lafois@gmail.com>
- Rename parameter 1 of "getActions" from "xmpp" to "xmppclient".
- Remove "getEvent()" as "receivedEvent" automatically contains the String since OH3.
In case of simulated Nikobus push button event refresh impacted modules too so binding fetches the updated state from affected modules.
Signed-off-by: Boris Krivonog <boris.krivonog@inova.si>
The original example references to the old telegram action, which is no longer supported. The updated example uses the (new) telegram binding.
Signed-off-by: Sören Berger <soeren.berger@u1337.de>
* [lgwebos] Remove outdated statement from README.md
Signed-off-by: Sebastian Prehn <sebastian.prehn@gmx.de>
* Adding a sentence on why these TV settings are relevant.
Signed-off-by: Sebastian Prehn <sebastian.prehn@gmx.de>
* [remoteopenhab] Catch exception when parsing item state
* Review comment: set channel state to UNDEF in case item state parsing failed
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* Added ConfigOptionProvider to provide file names ending with '.js' in Profile configuration
Signed-off-by: Christoph Weitkamp <github@christophweitkamp.de>
* open connection on refresh even if no modules exist
Signed-off-by: Wouter Denayer <wouter@denayer.com>
* ran mvn spotless:apply
Signed-off-by: Wouter Denayer <wouter@denayer.com>
* removed unnecessary file
Signed-off-by: Wouter Denayer <wouter@denayer.com>
* returning when the connection is offline since following code won't work
either.
Signed-off-by: Wouter Denayer <wouter@denayer.com>
Co-authored-by: Wouter Denayer <wouter@denayer.com>
* [icalendar] Fixed issues with moved events and wrong displayed events
* [icalendar] Changed test to use local time in test-calendar of #9647Fixes#9647.
Handling for RFC 5545's RECURRENCE-ID field inside of
events and rounded begin (and based on it end) down in subsecond
precision.
The calendar does not define a timezone. On a machine that uses a
different timezone than Europe/Berlin the test failed. As the behavior
itself is specified, the test was changed to use local time for its
dates.
Signed-off-by: Michael Wodniok <michi@noorganization.org>
