New firmware type reported from the community that's not in the SDK. Also,
we don't actually _use_ the firmware type or device type for anything, so
lets not crash if we don't match the bytes - lets just flag it unknown.
https://community.openhab.org/t/rfxcom-binding-unsupported-value/123615/12
Signed-off-by: James Hewitt <james.hewitt@uk.ibm.com>
Based on the RFXtrx SDK, new blind types. They mostly seem to match existing logic,
so this shouldn't break existing things.
Signed-off-by: James Hewitt <james.hewitt@uk.ibm.com>
* [homeconnect] Improve logging of SSE connection and add backoff interval in case of connection error
Signed-off-by: Jonas Brüstel <jonas@bruestel.net>
* [homeconnect] Fix SSE authorization header problem
Signed-off-by: Jonas Brüstel <jonas@bruestel.net>
* [homeconnect] Fix synchronized monitor
Signed-off-by: Jonas Brüstel <jonas@bruestel.net>
* [miio] add support for Mi Smart Standing Fan Pro Global (dmaker.fan.p15)
add support Mi Smart Standing Fan Pro EU/Global (dmaker.fan.p15)
Improve p8 & p9 fans
close#10843
Signed-off-by: Marcel Verpaalen <marcel@verpaalen.com>
* [miio] improve timeunit
Signed-off-by: Marcel Verpaalen <marcel@verpaalen.com>
* fixes#10738, #10799
Signed-off-by: Markus Michels <markus7017@gmail.com>
* - Feature #10090 New device#supplyVoltage channel for Shelly 2.5, 1PM
and 1L
- Change #10039 Info on "not reachable / timeout" should be warning,
not info
- Fix #10799 Missing Channel Definition for Vibration Events
- Fix #10738 Shelly UNI - ADC Voltage units of measure missing
- Fix #10111 Creating Equipment from Shelly Bulb Duo causes wrong
min/max
- README updated
Signed-off-by: Markus Michels <markus7017@gmail.com>
* #10737 Shelly EM - add powerFactor channel support
Signed-off-by: Markus Michels <markus7017@gmail.com>
* README updated
Signed-off-by: Markus Michels <markus7017@gmail.com>
* channel powerFactor (EM+EM3) is now of type Number:Dimensionless
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Fix for #10864: Do not trigger same alarm within 5 minutes
Signed-off-by: Markus Michels <markus7017@gmail.com>
* better logic for alarm filter
Signed-off-by: Markus Michels <markus7017@gmail.com>
* Fix exception in aggregation function when daily forecast is empty
Also catch any Exception to prevent thread from crashing
Signed-off-by: Anders Alfredsson <andersb86@gmail.com>
* Refactor to improve robustness of calculations
Improve tests to cover different forecast scenarios
Signed-off-by: Anders Alfredsson <andersb86@gmail.com>
* Fix urls are null until binding restarts.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* Change to using port config.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* automate the ffmpeg output folder to follow the UID.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* spotless fixes.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* Update readme.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* change to using the userdata folder.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* change to better field description.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* Add advanced.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* Add link to docs.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* improve readme.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* improve example path in readme.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
* Update bundles/org.openhab.binding.ipcamera/README.md
Cut and paste bandit strikes again. thanks.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
Co-authored-by: Fabian Wolter <github@fabian-wolter.de>
* Change to using ipcamera as folder loc.
Signed-off-by: Matthew Skinner <matt@pcmus.com>
Co-authored-by: Fabian Wolter <github@fabian-wolter.de>
Based on both the SDK and experimentation, this commit correctly identifies the
firmware and hardware version. A warning has been added for people with really
old firmware that may be different, but we didn't handle those different cases
well anyway.
Also includes updated firmware types and device types and support for pretty-
printing of the device and firmware type.
Signed-off-by: James Hewitt <james.hewitt@uk.ibm.com>
This is a new feature in the Pro firmwares that provides the real raw RF
pulse lengths as shorts. Good for being able to parrot switches that aren't
otherwise supported, once we add the tx support as well.
Signed-off-by: James Hewitt <james.hewitt@uk.ibm.com>
* Update unit formating
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Updates per last review
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Updated units to decimal
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* [semsportal] Allow portal and station cofiguration with .things file
Signed-off-by: Iwan Bron <bron@olisa.eu>
* Fix README.md warning
Signed-off-by: Iwan Bron <bron@olisa.eu>
* Make thing type better visible in documentation
Signed-off-by: Iwan Bron <bron@olisa.eu>
Co-authored-by: Iwan Bron <bron@olisa.eu>
There's no reason not to read multiple bytes at a time (that I could find) so
for best practice, set the read limit to be the maximum size of an rfxcom
message. Tested fine on my system.
Signed-off-by: James Hewitt <james.hewitt@uk.ibm.com>
* correct handling of system date/time field to close#10684
Signed-off-by: Raphael Mack <ramack@raphael-mack.de>
* further fix
Signed-off-by: Raphael Mack <ramack@raphael-mack.de>
Without this, any message over 127 bytes reports a negative length and
fails the message start test, which puts the code out of sync with the
rfxcom leading to lots of errors, and eventually, complete loss of
connection.
Signed-off-by: James Hewitt <james.hewitt@uk.ibm.com>
* Provides the ability to specify a timeout in the config, instead of using hardcoded 10 seconds.
Signed-off-by: Geroen Dierckx <geroen.dierckx@gmail.com>
* Use a single numeric type (double), remove ints and floats
Signed-off-by: Dan Cunningham <dan@digitaldan.com>
* Rebases with master. Fixes All Checkstyle warning, renames package 'model' -> 'dto'
Signed-off-by: Dan Cunningham <dan@digitaldan.com>
* Prevent possible NPE
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Spotless
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Fixes missing unit information (especially for HmIP devices)
For some HmIP devices the "valueunit" attribute is empty and thus no
default unit type could be derived. Using the data point name solves
this problem (at least for the relevant data points).
Fixes#10533
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Condition result was wrong because of missing brackets
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Regenerated and reorganized descriptions
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Encoding changed to UTF-8 and some smaller text corrections
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Use default value as maximum if is greater than received max value
For some devices the data point definition retrieved from the CCU
contains default values that are higher than the maximum value. In order
to allow the configuration of these config options the allowed maximum
value needs to be set to the default value.
Fixes#10552
Signed-off-by: Martin Herbst <develop@mherbst.de>
* [VENSTAR THERMOSTAT BINDING] ADD AWAY MODE
Signed-off-by: Matthew Davies
matthew.davies@skynet.be
Signed-off-by: raveydavies <84205523+raveydavies@users.noreply.github.com>
* [VENSTAR THERMOSTAT] FIXED COMMAND AWAY MODE
Signed-off-by: Matthew Davies
matthew.davies@skynet.be
Signed-off-by: raveydavies <84205523+raveydavies@users.noreply.github.com>
* VENSTAR THERMOSTAT AWAY MODE AFTER INITIAL COMMIT FEEDBACK
This code includes the Away mode of the Venstar thermostat. It is
updated following initial feedback and suggestions on my first version
from @digitaldan.
Signed-off-by: Matthew Davies <matthew.davies@skynet.be>
Signed-off-by: raveydavies <84205523+raveydavies@users.noreply.github.com>
* VENSTAR THERMOSTAT BINDING - INCLUDE AWAY MODE
Removed the updateThermostat function, now have updateSettings and
updateControls corresponding to local API URLs.
Signed-off-by: Matthew Davies
<matthew.davies@skynet.be>
Signed-off-by: raveydavies <84205523+raveydavies@users.noreply.github.com>
* VENSTAR THERMOSTAT AWAY MODE - Modification updated as per feedback 1
June 2021
Signed-off-by: Matthew Davies
<matthew.davies@skynet.be>
Signed-off-by: raveydavies <84205523+raveydavies@users.noreply.github.com>
* VENSTAR THERMOSTAT AWAY MODE INCLUSION - UPDATED README
Signed-off-by: Matthew Davies <matthew.davies@skynet.be>
Signed-off-by: raveydavies <84205523+raveydavies@users.noreply.github.com>
new channels frequency and power factor.
Signed-off-by: Martin Hubert <github@martin-hubert.de>
Co-authored-by: Martin Hubert <github@martin-hubert.de>
* [velbus] Add new functionality PRESSED and LONG PRESSED and fix bug
New functionality:
Add the the possibility to simulate the PRESSED and LONG PRESSED message of an input.
Module supported with button simulation :
VMB1RYS (button : CH6)
VMB6IN (buttons : CH1 ... CH6)
VMB2PBN, VMB6PBN, VMB7IN, VMB8IR, VMB8PB, VMB8PBU, VMBEL1, VMBEL2, VMBEL4, VMBGP1, VMBGP1-2, VMBGP2, VMBGP2-2, VMBGP4, VMBGP4-2, VMBGP4PIR, VMBGP4PIR-2 (buttons : CH1 ... CH8)
VMBELO, VMBGPOD, VMBGPOD-2 (buttons : CH1 ... CH32)
Fix bug:
The channels names were not correctly assigned to the thing properties. The last channel had the default name, not the one retrieved from the module.
Also-by: cedricboon <cedric.boon@hotmail.com>
Signed-off-by: Daniel Rosengarten <github@praetorians.be>
Use the provided planned time for a washing program to set the channel "remaining_program_time_state" when no program is active
Fix#10744Fix#10703
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
Also-by: Bert Plonus <bert.plonus@miele.com>
Also-by: Martin Lepsy <martin.lepsy@miele.com>
Also-by: Benjamin Bolte <benjamin.bolte@itemis.de>
Signed-off-by: Björn Lange <bjoern.lange@itemis.de>
Previously there was a mismatch between the UIDs used by the handler and
the one actually registered from the XML-file.
This lead to channels not showing up in the UI.
(See https://github.com/openhab/openhab-webui/issues/406 )
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
To avoid the core framework updating automatically an item state while a
command is sent to this item but its handling by the binding is failing
or ignored
Fix#10700
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* [homeconnect] Returns an empty list of options for an unsupported program
Fix#10689
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* Review comment: List.of
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
Fix problem with historical Influx1 data that was generated with addon version <3.0.0 that didn't write generate item tag
Signed-off-by: Joan Pujol <joanpujol@gmail.com>
* add scheduler to start/stop sending instantaneous consumption
Signed-off-by: Conte Andrea <andrea@conte.com>
* added scheduler also in Initialize() in order to start reading data of a newly discovered thing
Signed-off-by: Conte Andrea <andrea@conte.com>
* removed setActivePowerNotificationsTime() from dispose()
Signed-off-by: Conte Andrea <andrea@conte.com>
* add log in dispose() method
Signed-off-by: Conte Andrea <andrea@conte.com>
