# HomeAssistant MQTT Components Binding

HomeAssistant MQTT Components are recognized as well. The base topic needs to be **homeassistant**.
The mapping is structured like this:

| HA MQTT                   | Framework     | Example MQTT topic                    |
| ------------------------- | ------------- | ------------------------------------- |
| Object                    | Thing         | `homeassistant/../../object`          |
| Component+Node            | Channel Group | `homeassistant/component/node/object` |
| → Component Features | Channel       | `state/topic/defined/in/comp/config`  |

## Requirements

The HomeAssistant MQTT requires two transformations to be installed:

* JINJA-Transformations
* JSONPath-Transformations

These can be installed under `Settings` → `Addon` → `Transformations`

## Limitations

* The HomeAssistant Fan Components only support ON/OFF.
* The HomeAssistant Cover Components only support OPEN/CLOSE/STOP.
* The HomeAssistant Light Component only supports RGB color changes.
* The HomeAssistant Climate Components is not yet supported.

## Tasmota auto discovery

To activate HomeAssistant discovery support on your Tasmota device you need to do the following:

* `Configuration` → `MQTT`: You must have unique `Client` name and `Topic` (should be the default).
* `Configuration` → `Other`: The `Device Name` will be used to identify the newly found device.
  And you need to enable MQTT, of course.
* `Console`: Enter `SetOption19 1`.

Your Tasmota device should now show up in your inbox.