# Pulseaudio Binding

This binding integrates pulseaudio devices.

## Supported Things

The Pulseaudio bridge is required as a "bridge" for accessing any other Pulseaudio devices.

You need a running pulseaudio server with module **module-cli-protocol-tcp** loaded and accessible by the server which runs your openHAB instance. The following pulseaudio devices are supported:

*   Sink
*   Source
*   Sink-Input
*   Source-Output
*   Combined-Sink

## Discovery

The Pulseaudio bridge is discovered through mDNS in the local network.

## Thing Configuration

The Pulseaudio bridge requires the host (ip address or a hostname) and a port (default: 4712) as a configuration value in order for the binding to know where to access it.
You can use `pactl -s <ip-address|hostname> list-sinks | grep "name:"` to find the name of a sink.

## Channels

All devices support some of the following channels:

| Channel Type ID | Item Type | Description                                                             |
|-----------------|-----------|-------------------------------------------------------------------------|
| volume          | Dimmer    | Volume of an audio device in percent                                    |
| mute            | Switch    | Mutes the device                                                        |
| state           | String    | Current state of the device (suspended, idle, running, corked, drained) |
| slaves          | String    | Slave sinks of a combined sink                                          |
| routeToSink     | String    | Shows the sink a sink-input is currently routed to                      |

## Audio sink

Sink things can register themselves as audio sink in openHAB. MP3 and WAV files are supported.
Use the appropriate parameter in the sink thing to activate this possibility (activateSimpleProtocolSink).
This requires the module **module-simple-protocol-tcp** to be present on the server which runs your openHAB instance. The binding will try to command (if not discovered first) the load of this module on the pulseaudio server.

## Full Example
### pulseaudio.things
```
Bridge pulseaudio:bridge:<bridgname> "<Bridge Label>" @ "<Room>" [ host="<ipAddress>", port=4712 ] {
  Things:
  	Thing sink          multiroom       "Snapcast"           @ "Room"       [name="alsa_card.pci-0000_00_1f.3", activateSimpleProtocolSink="true", simpleProtocolSinkPort="4711"] // the name corresponds to pactl list-sinks output
	Thing source        microphone      "microphone"         @ "Room"       [name="alsa_input.pci-0000_00_14.2.analog-stereo"]
	Thing sink-input    openhabTTS      "OH-Voice"           @ "Room"       [name="alsa_output.pci-0000_00_1f.3.hdmi-stereo-extra1"]
	Thing source-output remotePulseSink "Other Room Speaker" @ "Other Room" [name="alsa_input.pci-0000_00_14.2.analog-stereo"]
	Thing combined-sink hdmiAndAnalog   "Zone 1+2"           @ "Room"       [name="combined"]
  }
```
<!--
### pulseaudio.items
```

```
-->