contact-control items need to send to the bus like a switch item,
to trigger a state update in the external device.
* Add a new profile for contact-control items
* Add a profile factory and a profile advisor class
* Handle postUpdate like a command and send message on KNX bus
Fixes#16115.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Signed-off-by: Ciprian Pascu <contact@ciprianpascu.ro>
Allow lossy conversion from RGBW to HSBType and back instead
of using separate items for RGB and W.
Select via DPT 251.60600.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Signed-off-by: Ciprian Pascu <contact@ciprianpascu.ro>
* [knx] Allow receiving DPT 235.001
Composed type not yet supported by Calimero, thus only receiving
data is implemented.
Configure DPT 235.001 to receive ActiveEnergy.
Configure DPT 235.61001 to receive Tariff information.
Fixes#15159
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Signed-off-by: Ciprian Pascu <contact@ciprianpascu.ro>
* Allow assigning Switch or Contact to most of the DPT 1 subtypes
(exceptions 1.008 UpDownType, 1.010 StopMoveType, 1.022 DecimalType).
* Tests for all published subtypes for DPT 1.
* Fix sending of DPT 1.022.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Signed-off-by: Ciprian Pascu <contact@ciprianpascu.ro>
This helps with stopping the proliferation of unnecessary semicolons.
Signed-off-by: Wouter Born <github@maindrain.net>
Signed-off-by: Ciprian Pascu <contact@ciprianpascu.ro>
* [knx] New modifier to set mainGA write-only
Co-authored-by: Florian Hotze <florianh_dev@icloud.com>
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* Fix IOOB exception with missing DPT in number channels
Also improves test messages for DPT unit tests
Signed-off-by: Jan N. Klug <github@klug.nrw>
Co-authored-by: Holger Friedrich <mail@holger-friedrich.de>
* Fix problem with DPT 251.600.
In the old implementation the datatype was implemented with byte 0-255.
The DPT 251.600 is defined with 0-100%, change this from byte to
PercentType.
Signed-off-by: Marco Mueller <marco@ms.mueller.ch>
Special handling for temperature differences in °F and °F/%,
DPT 9.002 and 9.003, needs to be adapted due to change in core.
Refs openhab/openhab-core#3792.
Implementation is valid for 4.0 and 4.x snapshot.
Fixes#15567.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* [knx] Implement console commands
Add commands knx:* to openHAB console.
Initial implementation of knx:show_unknown_ga, which shows group
addresses which are seen in the installation but not used by
openHAB.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* New translations jruby.properties (German)
* New translations knx.properties (German)
* New translations openwebnet.properties (Italian)
* New translations anthem.properties (Italian)
* [knx] Fix decoding of DPT 242.600 and add tests
Correct handling of parameter Y for DPT 242.600.
Add back to back tests of DPT 232.600 and 242.600,
testing color conversion from raw bytes to HSB and
back to Calimero color representation as String.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Carryover from smarthomej/addons#107.
Update to match current implementation in KNX binding
and Calimero 2.5.1.
Also-by: Jan N. Klug <github@klug.nrw>
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* [knx] Improve config description for GAs
Carryover from smarthomej/addons#257.
Also-by: Jan N. Klug <github@klug.nrw>
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* [knx] Refactoring, add basic support for UOM
Preparation for refactoring KnxCoreTypeMapper.
Carryover from smarthomej/addons#107.
Merge UOM implementations.
* [knx] Adapt tests
DPT strings for QuantityType now strip off a tailing .0 when decimals
are converted.
* [knx] Refactoring
Use pattern matching with instanceof operator (new Java17 feature).
* [knx] Refactoring, performance improvements
Introduce KNXChannel class.
Carryover from smarthomej/addons#114.
* [knx] Add warning for incompatible DPT type
Configuring incompatible DPT/channel combinations (e.g. DPT 1.005 (alarm) on Contact channels
or DPT 1.019 (windows/door) on Switch channels) is not allowed but was silently ignored.
This PR adds a warning in case incompatible configurations are detected.
Carryover from smarthomej/addons#203.
* [knx] Add full support for UoM
Replace UoM handling with the implementation from smarthome/j.
Carryover from smarthomej/addons#206.
* [knx] Refactor KNXCoreTypeMapper, add RGBW and xyY
Carryover from smarthomej/addons#208.
* [knx] Fix RGB conversion
Carryover from smarthomej/addons#219.
* [knx] Remove workarounds obsoleted by Calimero 2.5
Carryover from smarthomej/addons#226.
* [knx] Add parameter for disabling incoming UoM
Carryover from smarthomej/addons#230.
* [knx] Fix fallback to DecimalType in number conversion
Carryover from smarthomej/addons#279.
* [knx] Fix DPT 251.600 decoding
Carryover from smarthomej/addons#349.
* [knx] Fix UoM handling for special types
* [knx] Add test for KNXChannelFactory
* [knx] Update CODEOWNERS for knx
* [knx] Default conversion for DPT 5.001 and 6.001
* [knx] Fix write blocked forever after read from bus
Carryover from smarthomej/addons#299 and smarthomej/addons#330.
* [knx] Use new class ColorUtil from core for HSB conversion
Also-by: Jan N. Klug <github@klug.nrw>
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
