* [knx] Upgrade Calimero to 2.6-rc1
- Bugfixes and new subtypes for DPTs 20, 21, 22.
- Remove workarounds for issues in v2.5.1.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Allow lossy conversion from RGBW to HSBType and back instead
of using separate items for RGB and W.
Select via DPT 251.60600.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* [knx] Allow receiving DPT 235.001
Composed type not yet supported by Calimero, thus only receiving
data is implemented.
Configure DPT 235.001 to receive ActiveEnergy.
Configure DPT 235.61001 to receive Tariff information.
Fixes#15159
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* [knx] New modifier to set mainGA write-only
Co-authored-by: Florian Hotze <florianh_dev@icloud.com>
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* [knx] Implement console commands
Add commands knx:* to openHAB console.
Initial implementation of knx:show_unknown_ga, which shows group
addresses which are seen in the installation but not used by
openHAB.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* [knx] Refactoring, add basic support for UOM
Preparation for refactoring KnxCoreTypeMapper.
Carryover from smarthomej/addons#107.
Merge UOM implementations.
* [knx] Adapt tests
DPT strings for QuantityType now strip off a tailing .0 when decimals
are converted.
* [knx] Refactoring
Use pattern matching with instanceof operator (new Java17 feature).
* [knx] Refactoring, performance improvements
Introduce KNXChannel class.
Carryover from smarthomej/addons#114.
* [knx] Add warning for incompatible DPT type
Configuring incompatible DPT/channel combinations (e.g. DPT 1.005 (alarm) on Contact channels
or DPT 1.019 (windows/door) on Switch channels) is not allowed but was silently ignored.
This PR adds a warning in case incompatible configurations are detected.
Carryover from smarthomej/addons#203.
* [knx] Add full support for UoM
Replace UoM handling with the implementation from smarthome/j.
Carryover from smarthomej/addons#206.
* [knx] Refactor KNXCoreTypeMapper, add RGBW and xyY
Carryover from smarthomej/addons#208.
* [knx] Fix RGB conversion
Carryover from smarthomej/addons#219.
* [knx] Remove workarounds obsoleted by Calimero 2.5
Carryover from smarthomej/addons#226.
* [knx] Add parameter for disabling incoming UoM
Carryover from smarthomej/addons#230.
* [knx] Fix fallback to DecimalType in number conversion
Carryover from smarthomej/addons#279.
* [knx] Fix DPT 251.600 decoding
Carryover from smarthomej/addons#349.
* [knx] Fix UoM handling for special types
* [knx] Add test for KNXChannelFactory
* [knx] Update CODEOWNERS for knx
* [knx] Default conversion for DPT 5.001 and 6.001
* [knx] Fix write blocked forever after read from bus
Carryover from smarthomej/addons#299 and smarthomej/addons#330.
* [knx] Use new class ColorUtil from core for HSB conversion
Also-by: Jan N. Klug <github@klug.nrw>
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Slightly change wording of docs related to localSourceAddress to avoid
address conflicts during initial setup.
Add remark about knxd.
Fixes#13602.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
* [knx] Add support for KNX IP Secure
* add support for KNX IP Secure, new options SECURETUNNEL and
SECUREROUTER, refers to #8872
* add config options for credentials for secure connections
* update user documentation
* add test cases
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Clarify handling of initial read and readInterval in documentation.
Updated labels to distinguish readInterval and pollInterval.
Fixes#12921.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Items with dimensions (QuantityType) are now translated and can be sent to the
KNX bus. This requires the correct DPT to be specified in the channel
definition. Fixes#10706.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
CEMI frame format is used by newer serial devices like kBerry.
Calimero library can be configured to use CEMI instead of default EMI.
Followup on #10407. Relates to #4026.
Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
Changed Example of Dimmer channel. Makes no sense to provide both Switch and Position Status in configuration, as an update of Switch Status will delete Position and vice versa. Position Status makes sense.
Related to #8607.
In some cases removed information that is actually generic information and should not be in binding readme.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
