* Prevent possible NPE
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Spotless
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Fixes missing unit information (especially for HmIP devices)
For some HmIP devices the "valueunit" attribute is empty and thus no
default unit type could be derived. Using the data point name solves
this problem (at least for the relevant data points).
Fixes#10533
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Condition result was wrong because of missing brackets
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Regenerated and reorganized descriptions
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Encoding changed to UTF-8 and some smaller text corrections
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Use default value as maximum if is greater than received max value
For some devices the data point definition retrieved from the CCU
contains default values that are higher than the maximum value. In order
to allow the configuration of these config options the allowed maximum
value needs to be set to the default value.
Fixes#10552
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Removed method that was already marked as deprecated
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Handle HM-ES-TX-WM with firmware version >= 2.0 as different device
The device provides different data points (channels) depending on the
firmware version. Therefore devices with a firmware version >= 2.0 are
handled as a different device.
Fixes#9793
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Don't change uninitialized thing state automatically to online
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Listen to all network interfaces instead of limiting it to only one
This also makes the specification of a separate bind address
superfluous.
Fixes#9855Fixes#10075
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Add support for HmIP-eTRV-C-2 device
The event messages received for this device are not correctly formatted
and thus some special treatment for at least one data point is required.
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Spotless formatting applied
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Configured XML parsers to resist XXE attacks
Signed-off-by: Kai Kreuzer <kai@openhab.org>
* added fix for avmfritz
Signed-off-by: Kai Kreuzer <kai@openhab.org>
* added fix for sonos
Signed-off-by: Kai Kreuzer <kai@openhab.org>
* added fix for vitotronic and bosesoundtouch
Signed-off-by: Kai Kreuzer <kai@openhab.org>
* changed avmfritz to singleton pattern
Signed-off-by: Kai Kreuzer <kai@openhab.org>
* addressed roku binding
Signed-off-by: Kai Kreuzer <kai@openhab.org>
* address all uses of DocumentBuilderFactory
Signed-off-by: Kai Kreuzer <kai@openhab.org>
* fixed other occurrences in roku binding
Signed-off-by: Kai Kreuzer <kai@openhab.org>
Related to #8607.
In some cases removed information that is actually generic information and should not be in binding readme.
Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* Replace deprecated constructors
* Removed no longer existing settings from the documentation. They were already marked as deprecated since several versions.
* Refactored communication with the HM gateway
- simplified coding for the communication with the gateway
- buffer size for communication is now configurable to avoid problems
with too small buffers
- Previous solution for #6963 was not sufficient. Should be finally done
with these changes
* Retrieving the duty cycle is sufficient to check connection
- ping requests could therefore be safely removed problems with the automatic reconnection were solved.
* Changed to explicit list of Exception
Fixes#8808
Signed-off-by: Martin Herbst <develop@mherbst.de>
Older HM dimmers are using a maximum values of 1.0. But also for these
devices the values must be corrected.
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Max value and format pattern were not correct for dimmers (Fixes#8799)
* Fixed calls to deprecates methods/constructors
* Make sure channelLinked is executed at restart (see also: https://github.com/openhab/openhab-core/issues/1707)
Signed-off-by: Martin Herbst <develop@mherbst.de>
* Configures XStream security to prevent "Security framework of XStream not initialized, XStream is probably vulnerable" warnings.
* Resolves the itest bundles for the upgrade to XStream 1.4.13
Related to openhab/openhab-core#1688
Signed-off-by: Wouter Born <github@maindrain.net>
