From 9f35e7ba314f61c2f5e6efe32ab028445ec6ceb6 Mon Sep 17 00:00:00 2001 From: Michael B Date: Wed, 11 Aug 2021 12:00:30 +0200 Subject: [PATCH] Added inverted info for rollershutters (#11094) Currently openHAB and the CCU are using different values for the same state of a rollershutter. Added information about this under Troubleshooting and listed some examples. Signed-off-by: Michael Bredehorn --- bundles/org.openhab.binding.homematic/README.md | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/bundles/org.openhab.binding.homematic/README.md b/bundles/org.openhab.binding.homematic/README.md index 7d2e06ba52d..c923afcfc84 100644 --- a/bundles/org.openhab.binding.homematic/README.md +++ b/bundles/org.openhab.binding.homematic/README.md @@ -666,6 +666,15 @@ You have to delete the thing, start a scan and add it again. In case of problems in the discovery or if above mentioned error message appears in `openhab.log`, the size for the transmission buffer for the communication with the gateway is too small. The problem can be solved by increasing the `bufferSize` value in the bridge configuration. +**Rollershutters are inverted** + +openHAB and the CCU are using different values for the same state of a rollershutter. +Examples: HmIP-BROLL, HmIP-FROLL, HmIP-BBL, HmIP-FBL and HmIP-DRBLI4 +| | Open | Closed | +|---------|------|--------| +| openHAB | 0% | 100% | +| CCU | 100% | 0% | + ### Debugging and Tracing If you want to see what's going on in the binding, switch the log level to DEBUG in the Karaf console