demus/openhab-addons
1
0
Fork 0
mirror of https://github.com/openhab/openhab-addons.git synced 2025-01-10 15:11:59 +01:00
Code Issues Packages Projects Releases Wiki Activity

[nibeheatpump] Updated NibeGW readme (#16864)

Browse Source 
Added build information for ProDiNo ESP32 Ethernet v1 board.

Signed-off-by: Pauli Anttila <pauli.anttila@gmail.com>
Signed-off-by: Ciprian Pascu <contact@ciprianpascu.ro>
This commit is contained in:
pali 2024-06-12 20:45:48 +03:00 committed by Ciprian Pascu
parent 3ba3152077
commit 148324615c
1 changed files with 50 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

53
bundles/org.openhab.binding.nibeheatpump/contrib/NibeGW/Arduino/README.md
View File

@ -85,7 +85,30 @@ Enable support for HARDWARE_SERIAL:
## ProDiNo ESP32 Ethernet v1
Todo
NibeGW default settings are valid for ProDiNo ESP32 Ethernet v1 board.
Dynamic configuration is enabled by default.
### Config.h:
```c
//#define PRODINO_BOARD
#define PRODINO_BOARD_ESP32
//#define TRANSPORT_ETH_ENC28J6A0
```
### NibeGW.h:
```c
#define HARDWARE_SERIAL_WITH_PINS
//#define HARDWARE_SERIAL
```
### Install libraries
Install [ProDinoESP32](https://github.com/kmpelectronics/ProDinoESP32) library (tested with version 2.0.0).
NibeGW code is compatible with ESP32 v2.0.x board library by Espressif Systems.
Install correct ESP32 library via Arduino IDE board manager.
## ProDiNo Ethernet V2
@ -95,7 +118,8 @@ Todo
## Debugging
Debugging messages are available by connecting to port 23 to your NibeGW via telnet. Enable debugging in Config.h:
Debugging messages are available by connecting to port 23 to your NibeGW via telnet.
Enable debugging in Config.h:
```
#define ENABLE_DEBUG
@ -103,7 +127,9 @@ Debugging messages are available by connecting to port 23 to your NibeGW via tel
#define ENABLE_REMOTE_DEBUG // Remote debug is available in telnet port 23
```
You can connect to NibeGW with any telnet client. You can also set some options via telnet. With 'h' you get a menue with all available options:
You can connect to NibeGW with any telnet client.
You can also set some options via telnet.
With 'h' you get a menu with all available options:
```
Arduino NibeGW
@ -123,3 +149,24 @@ On the target IP you can see the receiving udp messages with netcat (if you chan
nc -lu 9999 | hexdump -C
```
## Dynamic Configuration
When dynamic configuration is enabled (only ESP32 boards), NibeGW can be configured via Wi-Fi connection.
Also OTA firmware update is supported.
The following libraries are required:
* Bleeper (tested with version 1.1.0)
* ElegantOTA (tested with version 2.2.9)
Dynamic configuration mode is loaded if input 0 is ON during boot.
When dynamic configuration mode is activated, login to the 'Bleeper' Wi-Fi access point.
Configuration page is available on port 80.
OTA update page on port 8080.
### Disable Dynamic Configuration
Dynamic configuration can be disabled by commenting out following line from config.h file.
```c
//#define ENABLE_DYNAMIC_CONFIG
```