Robonect is a piece of hardware which has to be put into your Husqvarna, Gardena and other branded automower and makes it accessible in your internal network.
This binding integrates mowers having the robonect module installed as a thing into the home automation solution, allowing to control the mower and react on mower status changes in rules.
| `mowing-hours` | Number | Retrieves the number of hours of mowing operation |
| `mode` | String | Retrieves or sets the mode of the mower. Possible values retrieval values are <ul><li>HOME</li><li>AUTO</li><li>MANUAL</li><li>EOD : triggers the "end of day" mode. The mower will switch in to the HOME mode and stay int this mode for the rest of the day. After midnight it will switch back to the mode which was set previously.</li></ul> |
| `status` | Number | Retrieves the current mower status which can be <ul><li>0 : DETECTING_STATUS</li><li>1 : PARKING</li><li>2 : MOWING</li><li>3 : SEARCH_CHARGING_STATION</li><li>4 : CHARGING</li><li>5 : SEARCHING</li><li>6 : UNKNOWN_6</li><li>7 : ERROR_STATUS</li><li>16 : OFF</li><li>17 : SLEEPING</li><li>98 : OFFLINE (Binding cannot connect to mower)</li><li>99 : UNKNOWN</li></ul> |
| `start` | Switch | Starts the mower. ON is started (analog to pressing the start button on mower) or OFF (analog to the stop button on mower). |
| `job` | Switch | Starts a job. The channels can be configured with the three parameters `remoteStart`, `afterMode` and `duration`. `remoteStart` defines the mowing start point with the corresponding options `REMOTE_1`, `REMOTE_2` and `DEFAULT`. `afterMode` is the mode the mower will be set after the job is done. Allowed values are `AUTO`, `HOME` or `EOD`. `duration` is the job duration in minutes. Please note, if the mower is charging it will wait to start the job until it is fully charged, but the jobs duration is already started.|
| `timer-status` | String | Retrieves the status of the timer which can be <ul><li>INACTIVE : no timer set</li><li>ACTIVE - timer set and currently running</li><li>STANDBY - timer set but not triggered/running yet</li></ul> |
| `timer-next` | DateTime | Retrieves the Date and Time of the next timer set. This is just valid if there is an ACTIVE timer status (see `timer-status`). |
| `wlan-signal` | Number | Retrieves the current WLAN Signal strength in dB |
| `error-code` | Number | The mower manufacturer code in case the mower is in status 7 (error). The binding resets this to UNDEF, once the mower is not in error status anymore. |
| `error-message` | String | The error message in case the mower is in status 7 (error). The binding resets this to UNDEF, once the mower is not in error status anymore. |
| `error-date ` | DateTime | The date and time the error happened. The binding resets this to UNDEF, once the mower is not in error status anymore. |
| `last-error-code` | Number | The mower manufacturer code of the last error happened |
| `last-error-message` | String | The error message of the last error happened |
| `last-error-date ` | DateTime | The date and time of the last error happened |
| `health-temperature` | Number | The temperature of the mower (just available for robonect firmware >= 1.0) |
| `health-humidity ` | Number | The humidity of the mower (just available for robonect firmware >= 1.0) |
