2023-12-28 12:59:48 +01:00
# Home Assistant MQTT Components Binding
2020-09-21 01:58:32 +02:00
2023-12-28 12:59:48 +01:00
NOTE: This binding is provided by the [MQTT binding ](https://www.openhab.org/addons/bindings/mqtt/ ), and therefore no explicit installation is necessary beyond installing the MQTT binding.
2020-09-21 01:58:32 +02:00
2023-12-28 12:59:48 +01:00
Devices that use [Home Assistant MQTT Discovery ](https://www.home-assistant.io/integrations/mqtt/#mqtt-discovery ) are automatically configured with this binding.
Components that share a common `device.identifiers` will automatically be grouped together as a single Thing.
Each component will be represented as a Channel Group, with the attributes of that component being individual channels.
2020-09-21 01:58:32 +02:00
2023-12-28 12:59:48 +01:00
## Discovery
2020-09-21 01:58:32 +02:00
2023-12-28 12:59:48 +01:00
Any device that publishes the component configuration under the `homeassistant` prefix in MQTT will have their components automatically discovered and added to the Inbox.
You can also manually create a Thing, and provide the individual component topics, as well as a different discovery prefix.
2022-01-11 13:25:27 +01:00
2024-10-26 19:24:55 +02:00
## Supported Components and Channels
The following components (and their associated channels) are supported.
If a component has multiple channels, they are put together in a channel group with the component's ID.
If a component only has a single channel, that channel is renamed with the component's ID, and placed directly on the Thing, without a group.< br >
Note that most channels are optional, and may not be present.< br >
Note also that just because these tables show that a channel may be read/write, full functionality is dependent on the device.
### [Alarm Control Panel](https://www.home-assistant.io/integrations/alarm_control_panel.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|------------------------------------------------------------------------------------------------------------------------------------------|
| state | String | R/W | The current state of the alarm system, and the ability to change its state. Inspect the state and command descriptions for valid values. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Binary Sensor](https://www.home-assistant.io/integrations/binary_sensor.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| sensor | Switch | RO | The current state of the sensor (on/off). See [Home Assistant documentation ](https://www.home-assistant.io/integrations/binary_sensor/#device-class ) for how to interpret the value for specific device classes. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Button](https://www.home-assistant.io/integrations/button.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|------------------------------------------------------------------------------|
| button | String | WO | Inspect the state description for the proper string to send (usually PRESS). |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Camera](https://www.home-assistant.io/integrations/camera.mqtt/)<br>
Base64 encoding is not supported
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|-----------------------------------------------------|
| camera | Image | RO | The latest image received. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Climate](https://www.home-assistant.io/integrations/climate.mqtt/)
| Channel ID | Type | R/W | Description |
|---------------------|--------|-----|-------------------------------------------------------------------------------|
| action | String | RO | The current operating state of the HVAC device. |
| current-temperature | Number | RO | The current temperature |
| fan-mode | String | R/W | The desired fan speed. Inspect the state description for allowed values. |
| mode | String | R/W | The desired operating mode. Inspect the state description for allowed values. |
| swing | String | R/W | The desired swing mode. Inspect the state description for allowed values. |
| temperature | Number | R/W | The desired temperature. |
| temperature-high | Number | R/W | The desired maximum temperature. |
| temperature-low | Number | R/W | The desired minimum temperature. |
| power | Switch | WO | Use to turn the HVAC on or off, regardless of mode. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Cover](https://www.home-assistant.io/integrations/cover.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|----------------|-----|----------------------------------------------------------------------------------|
| cover | Rollershutter | R/W | Status and control of the cover, possibly including its current position. |
| state | String | RO | The current state of the cover, possibly including opening, closing, or stopped. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
2024-12-03 06:10:44 +01:00
### [Device Tracker](https://www.home-assistant.io/integrations/device_tracker.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|---------------|-----|------------------------------------------------------------------------------------------------------------------------------------|
| home | Switch | RO | If the tracker reports itself as home or not home. |
| location-name | String | RO | The arbitrary location the tracker reports itself as at (can often be "home" or "not_home"). |
| location | Location | RO | The GPS location, if the tracker can report it. |
| gps-accuracy | Number:Length | RO | The accuracy of a GPS fix. Even if a tracker can provide GPS location, it may not be able to determine and/or report its accuracy. |
| source-type | String | RO | The source of the data, if the tracker reports it. May be "gps", "router", "bluetooth", or "bluetooth_le". |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
2024-10-26 19:24:55 +02:00
### [Device Trigger](https://www.home-assistant.io/integrations/device_trigger.mqtt/)
If a device has multiple device triggers for the same subtype (the particular button), they will only show up as a single channel, and all events for that button will be delivered to that channel.
| Channel ID | Type | R/W | Description |
|----------------------------------|---------|-----|--------------------------------------------------------------------------------------|
| {the subtype from the component} | Trigger | N/A | A trigger channel that receives triggers (typically button presses) from the device. |
### [Event](https://www.home-assistant.io/integrations/event.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|---------|------|-----------------------------------------------------------|
| event-type | Trigger | N/A | The event type (e.g. a particular scene being triggered). |
| json-attributes | Trigger | N/A | Additional attributes, as a serialized JSON string. |
### [Fan](https://www.home-assistant.io/integrations/fan.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|---------|-----|-----------------------------------------------------------|
| switch | Switch | R/W | Only one of `switch` or `speed` will be present. |
| speed | Dimmer | R/W | Only one of `switch` or `speed` will be present. |
| preset-mode | String | R/W | Inspect the state description for valid values. |
| oscillation | Switch | R/W | If the fan itself is oscillating, in addition to blowing. |
| direction | String | R/W | `forward` or `backward` |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
2024-12-07 00:39:43 +01:00
### [Humidifier](https://www.home-assistant.io/integrations/humidifier.mqtt/)
| Channel ID | Type | R/W | Description |
|------------------|----------------------|-----|------------------------------------------------------------------------------------------|
| state | Switch | R/W | If the humidifier should be on or off. |
| action | String | RO | What the humidifier is actively doing. One of `off` , `humidifying` , `drying` , or `idle` . |
| mode | String | R/W | Inspect the state description for valid values. |
| current-humidity | Number:Dimensionless | RO | The current detected relative humidity, in %. |
| target-humidity | Number:Dimensionless | R/W | The desired relative humidity, in %. |
| device-class | String | RO | `humidifier` or `dehumidifier` |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
2024-10-26 19:24:55 +02:00
### [Light](https://www.home-assistant.io/integrations/light.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|---------|-----|-----------------------------------------------------------------|
| switch | Switch | R/W | Only one of `switch` , `brightness` , or `color` will be present. |
| brightness | Dimmer | R/W | Only one of `switch` , `brightness` , or `color` will be present. |
| color | Color | R/W | Only one of `switch` , `brightness` , or `color` will be present. |
| color-mode | String | RO | The current color mode |
| color-temp | Number | R/W | The color temperature (in mired) |
| effect | String | R/W | Inspect the state description to see possible effects. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Lock](https://www.home-assistant.io/integrations/lock.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|-----------------------------------------------------------------------------------------------------------------------------------------------|
| lock | Switch | R/W | Lock/unlocked state. |
| state | String | R/W | Additional states may be supported such as jammed, or opening the door directly. Inspect the state and command descriptions for availability. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Number](https://www.home-assistant.io/integrations/number.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|-----------------------------------------------------|
| number | Number | R/W | |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Scene](https://www.home-assistant.io/integrations/scene.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|-----------------------------------------------------------------------------------------------------------|
| scene | String | WO | Triggers a scene on the device. Inspect the state description for the proper string to send (usually ON). |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Select](https://www.home-assistant.io/integrations/select.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|-------------------------------------------------------------------------------------|
| select | String | R/W | The value for the component. Inspect the state description for all possible values. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Sensor](https://www.home-assistant.io/integrations/sensor.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|-----------------------|-----|-----------------------------------------------------|
| sensor | Number/String/Trigger | RO | The value from the sensor. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Switch](https://www.home-assistant.io/integrations/switch.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|-----------------------------------------------------|
| switch | Switch | R/W | If the device is on or off. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
2024-12-05 23:27:05 +01:00
### [Tag Scanner](https://www.home-assistant.io/integrations/tag.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|---------|-----|---------------------------------|
| tag | Trigger | N/A | The value of the "scanned" tag. |
2024-10-26 19:24:55 +02:00
### [Text](https://www.home-assistant.io/integrations/text.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|-----------------------------------------------------|
| text | String | R/W | The text to display on the device. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Update](https://www.home-assistant.io/integrations/update.mqtt/)<br>
This is a special component, that will show up as additional properties on the Thing, and add a button on the Thing to initiate an OTA update.
The `json-attributes` channel for this component will always appear as part of channel group, and not be renamed to match the component itself.
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|-----------------------------------------------------|
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Vacuum](https://www.home-assistant.io/integrations/vacuum.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|--------|-----|--------------------------------------------------------------------------------------------------|
| command | String | WO | Send a command to the vacuum. Inspect the state description for allowed values. |
| fan-speed | String | R/W | Set the fan speed. Inspect the state description fro allowed values. |
| custom-command | String | WO | Send an arbitrary command to the vacuum. This may be a raw command, or JSON. |
| battery-level | Dimmer | RO | The vaccum's battery level. |
| state | String | RO | The state of the vacuum. One of `cleaning` , `docked` , `paused` , `idle` , `returning` , or `error` . |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
### [Valve](https://www.home-assistant.io/integrations/valve.mqtt/)
| Channel ID | Type | R/W | Description |
|-----------------|---------------|-----|---------------------------------------------------------------------------------------------|
| valve | Switch/Dimmer | R/W | If the valve is on (open), or not. For a valve with position (a Dimmer), 100% is full open. |
| json-attributes | String | RO | Additional attributes, as a serialized JSON string. |
2023-12-28 12:59:48 +01:00
## Supported Devices
See the [Home Assistant documentation ](https://www.home-assistant.io/integrations/mqtt/#support-by-third-party-tools ) for a broad list of devices that should be supported by this binding.
It's not feasible to test every component from every device, so there may be issues with specific devices.
Please [report an issue on GitHub ](https://github.com/openhab/openhab-addons/issues/new?title=[mqtt.homeassistant]+Unsupported+Device ) if you find a device that is not working as expected, and not otherwise noted as a limitation above.
### ESPHome
Configure your device to connect to MQTT as described [in the documentation ](https://esphome.io/components/mqtt.html ), and make sure `discovery` is not set to `false` .
Assuming you're not running Home Assistant in parallel, you should also remove any `api:` block in your configuration.
### Tasmota
To activate Home Assistant discovery support on your Tasmota device you need to do the following:
2022-01-11 13:25:27 +01:00
2022-12-08 21:36:05 +01:00
- `Configuration` → `MQTT` : You must have unique `Client` name and `Topic` (should be the default).
- `Configuration` → `Other` : The `Device Name` will be used to identify the newly found device.
2022-01-11 13:25:27 +01:00
And you need to enable MQTT, of course.
2022-12-08 21:36:05 +01:00
- `Console` : Enter `SetOption19 1` .
2022-01-11 13:25:27 +01:00
Your Tasmota device should now show up in your inbox.
