Additionally, they serve as a bridge for accessing other AHA devices.
For AHA functionality, the router has to run at least on firmware FRITZ!OS 6.00 and it has to support the "Smart Home" service.
### FRITZ!DECT 200 / FRITZ!DECT 210
This switchable outlets [FRITZ!DECT 210](https://avm.de/produkte/fritzdect/fritzdect-210/) and [FRITZ!DECT 200](https://avm.de/produkte/fritzdect/fritzdect-200/) have to be connected to a FRITZ!Box by DECT protocol.
They support switching the outlet and reading the current power, current voltage, accumulated energy consumption and temperature.
**NOTE:** The `voltage` channel will be added to the thing during runtime - if the interface supports it (FRITZ!OS 7 or higher).
### FRITZ!DECT Repeater 100
This [DECT repeater](https://avm.de/produkte/fritzdect/fritzdect-repeater-100/) has to be connected to a FRITZ!Box by DECT protocol.
These devices [FRITZ!DECT 302](https://avm.de/produkte/fritzdect/fritzdect-302/), [FRITZ!DECT 301](https://avm.de/produkte/fritzdect/fritzdect-301/), FRITZ!DECT 300 and [Comet DECT](https://eurotronic.org/produkte/dect-ule-heizkoerperthermostat/comet-dect/) ([EUROtronic Technology GmbH](https://eurotronic.org/)) are used to regulate radiators via DECT-ULE protocol.
The [FRITZ!DECT 400](https://avm.de/produkte/fritzdect/fritzdect-400/) and [FRITZ!DECT 440](https://avm.de/produkte/fritzdect/fritzdect-440/) are buttons for convenient operation of FRITZ! Smart Home devices (FRITZ!OS 7.08 or higher for FRITZ!DECT 400, 7.20 or higher for FRITZ!DECT 440).
The FRITZ!DECT 400 supports a configurable button to trigger short or long press events.
Beside four customizable buttons the FRITZ!DECT 440 supports temperature readings.
**NOTE:** FRITZ!DECT 440 now uses Channel Groups to group its Channels like `device#battery_level`, `device#battery_low` for device information, `sensors#temperature` for sensor data and `top-left`, `bottom-left`, `top-right` and `bottom-right` combined with `press` and `last_change` (see [Full Example](#full-example))
- [SmartHome Tür-/Fensterkontakt (optisch)](https://www.smarthome.de/geraete/eurotronic-smarthome-tuer-fensterkontakt-optisch) - an optical door/window contact (thing type `HAN_FUN_CONTACT`)
- [SmartHome Tür-/Fensterkontakt (magnetisch)](https://www.smarthome.de/geraete/smarthome-tuer-fensterkontakt-magnetisch-weiss) - a magnetic door/window contact (thing type `HAN_FUN_CONTACT`)
- [SmartHome Bewegungsmelder](https://www.smarthome.de/geraete/telekom-smarthome-bewegungsmelder-innen) - a motion sensor (thing type `HAN_FUN_CONTACT`)
- [SmartHome Rauchmelder](https://www.smarthome.de/geraete/smarthome-rauchmelder-weiss) - a smoke detector (thing type `HAN_FUN_CONTACT`)
- [SmartHome Wandtaster](https://www.smarthome.de/geraete/telekom-smarthome-wandtaster) - a switch with two buttons (thing type `HAN_FUN_SWITCH`)
- [Rollotron DECT 1213](https://www.rademacher.de/shop/rollladen-sonnenschutz/elektrischer-gurtwickler/rollotron-dect-1213) - an electronic belt winder (thing type `HAN_FUN_BLINDS`)
- [Becker BoxCTRL](https://becker-antriebe.shop/) - a radio controlled roller shutter drive (thing type `HAN_FUN_BLINDS`)
The first one provides the same channels and actions like the [FRITZ!DECT 302 / FRITZ!DECT 301 / FRITZ!DECT 300 / Comet DECT](https://www.openhab.org/addons/bindings/avmfritz/#fritz-dect-302-fritz-dect-301-fritz-dect-300-comet-dect) devices.
The latter provides the same channels like the [FRITZ!DECT 200 / FRITZ!DECT 210](https://www.openhab.org/addons/bindings/avmfritz/#fritz-dect-200-fritz-dect-210) / [FRITZ!Powerline 546E](https://www.openhab.org/addons/bindings/avmfritz/#fritz-powerline-546e) devices.
The FRITZ!Box has to run at least on firmware FRITZ!OS 6.69.
## Discovery
The FRITZ!Box and the powerline adapter are discovered through UPnP in the local network.
When added as things, a username/password has eventually to be set depending on your Box/Powerline security configuration.
The credentials given in the settings must have HomeAuto permissions.
This implies to enable "login to the home network with user name and password" setting in the FRITZ!Box.
To do so
- Click "System" in the FRITZ!Box user interface.
- Click "FRITZ!Box Users" in the "System" menu.
- Click on the "Login to the Home Network" tab.
- Enable the option "Login with FRITZ!Box user name and password".
The AIN (actor identification number) can be found in the FRITZ!Box interface -> Home Network -> SmartHome. When opening the details view for a device with the edit button, the AIN is shown. Use the AIN without the blank.
| incoming_call | Call | Details about incoming call. %2$s contains the external, calling number, %1$s is the internal, receiving number. | FRITZ!Box |
| outgoing_call | Call | Details about outgoing call. %1$s contains the external, called number, %2$s is the internal, calling number. | FRITZ!Box |
| active_call | Call | Details about active call. %1$s contains the external, calling number, %2$s is empty. | FRITZ!Box |
| call_state | String | Details about current call state, either IDLE, RINGING, DIALING or ACTIVE. | FRITZ!Box |
| apply_template | String | Apply template for device(s) (channel's state options contains available templates, for an alternative way see the description below) - FRITZ!OS 7 | FRITZ!Box, FRITZ!Powerline 546E |
| mode | String | States the mode of the device (MANUAL/AUTOMATIC/VACATION) | FRITZ!DECT 210, FRITZ!DECT 200, FRITZ!Powerline 546E, FRITZ!DECT 30x, Comet DECT |
| locked | Contact | Device is locked for switching over external sources (OPEN/CLOSE) | FRITZ!DECT 210, FRITZ!DECT 200, FRITZ!Powerline 546E, FRITZ!DECT 30x, Comet DECT |
| color | Color | Color lights | FRITZ!DECT 500, HAN_FUN_COLOR_BULB |
| color_temperature | Dimmer | Color temperature of lights in *white mode* | FRITZ!DECT 500, HAN_FUN_COLOR_BULB |
| color_temperature_abs | Number:Temperature | Color temperature of lights in *white mode* in Kelvin **Advanced** | FRITZ!DECT 500, HAN_FUN_COLOR_BULB |
| actual_temp | Number:Temperature | Current temperature of heating thermostat | FRITZ!DECT 30x, Comet DECT |
| set_temp | Number:Temperature | Set Temperature of heating thermostat | FRITZ!DECT 30x, Comet DECT |
| eco_temp | Number:Temperature | Eco Temperature of heating thermostat | FRITZ!DECT 30x, Comet DECT |
| comfort_temp | Number:Temperature | Comfort Temperature of heating thermostat | FRITZ!DECT 30x, Comet DECT |
| next_change | DateTime | Next change of the Set Temperature if scheduler is activated in the FRITZ!Box settings - FRITZ!OS 6.80 | FRITZ!DECT 30x, Comet DECT |
| next_temp | Number:Temperature | Next Set Temperature if scheduler is activated in the FRITZ!Box settings - FRITZ!OS 6.80 | FRITZ!DECT 30x, Comet DECT |
| contact_state | Contact | Contact state information (OPEN/CLOSED). | HAN-FUN contact (e.g. SmartHome Tür-/Fensterkontakt or SmartHome Bewegungsmelder)- FRITZ!OS 7 |
| last_change | DateTime | States the last time the button was pressed. | FRITZ!DECT 400, FRITZ!DECT 440, HAN-FUN switch (e.g. SmartHome Wandtaster) - FRITZ!OS 7 |
| rollershutter | Rollershutter | Rollershutter control and status. Accepts UP/DOWN/STOP commands and the opening level in percent. States the opening level in percent. | HAN-FUN blind (e.g. Rolltron DECT 1213) - FRITZ!OS 7 |
The trigger channel `press` for a FRITZ!DECT 440 device or HAN-FUN switch is of type `system.rawbutton` to allow the usage of the `rawbutton-toggle-switch` profile.
The trigger channel `press` for a FRITZ!DECT 400 device is of type `system.button`.
With the new [templates feature](https://en.avm.de/guide/smart-home/meet-the-smart-home-templates-from-fritz/) in FRITZ!OS 7, you can now save the settings of your Smart Home devices and groups as a template for certain occasions e.g. holidays or vacation.
Unfortunately it is not that simple to find out the unique identifier (AIN) for a template needed for sending it as command to the `apply_template` channel.
To retrieve the list of AINs assigned by FRITZ! for your templates, go to the FRITZ!Box' Support page at [http://fritz.box/html/support.html](http://fritz.box/html/support.html) within your local network and login.
Then in the section "Support Data" ("Support-Daten") press the button "Create Support Data" ("Support-Daten erstellen") and save the generated text file.
Open the file in a text editor and search for the term "avm_home_device_type_template".
You will find entries like the attached one.
The `identifyer 'tmpFC0F2C-3960B7EE6'` contains the templates AINs you need for using them in rules.
Name 'Demo Template', identifyer 'tmpFC0F2C-3960B7EE6', firmware version '0.1'
[aktive] ID 60013, emc 0x0, model 0x0, grouphash=0x0, devicetype 'avm_home_device_type_template', functionbitmask 0x4000, sortid 0, batt perc 255 low 255, pollinterval 0, polltimeout 0, validchangetime: 0
--------------------
```
templates.rules
```java
rule "Apply template"
when
...
then
ApplyTemplate.sendCommand("tmpFC0F2C-3960B7EE6")
end
```
### Actions
For heating devices and heating groups there are two actions available to set Boost or Window Open mode for a given duration: `setBoostMode(long)` and `setWindowOpenMode(long)`.
The duration has to be given in seconds, min. 1, max. 86400, 0 for deactivation.
Number:Temperature Temperature1 "Current measured temperature [%.1f %unit%]" { channel="avmfritz:FRITZ_DECT_Repeater_100:1:rrrrrrrrrrrr:temperature" }
Number:Temperature FRITZ_GROUP_HEATINGSetTemperature "Group temperature set point [%.1f %unit%]" { channel="avmfritz:FRITZ_GROUP_HEATING:1:AA_AA_AA_900:set_temp" }
