mirror of
https://github.com/openhab/openhab-addons.git
synced 2025-01-12 08:02:04 +01:00
73 lines
2.7 KiB
Markdown
73 lines
2.7 KiB
Markdown
|
# Getting Started
|
||
|
|
|
||
|
|
# Prepare Z-Way Server
|
||
|
|
|
||
|
|
1. [Download](https://razberry.z-wave.me/z-way-server/) Z-Way v2.2.3 or newer (further information about installing Z-Way you can find [here](http://razberry.z-wave.me/index.php?id=24))
|
||
|
|
|
||
|
|
# Prepare openHAB
|
||
|
|
|
||
|
|
1. [Download](https://www.openhab.org/download/) openHAB 2 (further information about installing openHAB you can find [here](https://www.openhab.org/docs/installation/))
|
||
|
|
2. Install Z-Way Binding
|
||
|
|
- via Extension Manager
|
||
|
|
- via Download
|
||
|
|
|
||
|
|
```shell
|
||
|
|
cd /opt/openhab2/addons
|
||
|
|
sudo wget https://github.com/openhab/openhab-addons/files/636686/org.openhab.binding.zway-2.0.0-SNAPSHOT.zip
|
||
|
|
sudo unzip org.openhab.binding.zway-2.0.0-SNAPSHOT.zip
|
||
|
|
sudo rm org.openhab.binding.zway-2.0.0-SNAPSHOT.zip
|
||
|
|
```
|
||
|
|
|
||
|
|
3. Start openHAB by running `start.bat` or `start.sh`
|
||
|
|
4. The first start may take up to 5 minutes. You should reach openHAB2 at `http://localhost:8080`
|
||
|
|
|
||
|
|
# Configure Z-Way in openHAB
|
||
|
|
|
||
|
|
## Create and configure a Z-Way Bridge
|
||
|
|
|
||
|
|
Open the *Paper UI*
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Open the *Inbox* and create a Z-Way Server
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Open the *Configuration* - *Things* and select Z-Way Server
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Change configuration: In order for the Observer mechanism works, the IP address, port and protocol of both systems are required.
|
||
|
|
|
||
|
|
- **Z-Way Server**
|
||
|
|
- **IP address** (default: localhost)
|
||
|
|
- **port** (default: 8083)
|
||
|
|
- **protocol** (default: http)
|
||
|
|
- **username** (default: admin)
|
||
|
|
- **password** must be set (no default value)
|
||
|
|
- **options**
|
||
|
|
- **polling interval** (default: 3600) in seconds
|
||
|
|
|
||
|
|
**The following picture is no longer up to date!**
|
||
|
|
|
||
|
|
|
||
|
|
## Create and configure Z-Way Devices
|
||
|
|
|
||
|
|
Open the *Inbox* and start manually the *Discovery* for the Z-Way Binding. The *Discovery* must be started manually at this point, because the *Discovery* is running only every 4 minutes. The start time of the interval is the creation of Z-Way Server, even if the configuration is not yet complete. After the Z-Way Server is fully configured, the interval must be awaited or started manually.
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Create *Things* from the *Discovery Results*
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Example: openHAB *Thing* compared to the equivalent Z-Way *Devices*
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|