The Teleinfo binding supports an interface to ENEDIS/ERDF [Teleinfo protocol](https://www.enedis.fr/sites/default/files/Enedis-NOI-CPT_54E.pdf) for (French) Electricity Meter. This binding works with a Teleinfo modem plugged to the I1 and I2 terminals of your electricity meter. Teleinfo modems can be ordered (see the [list of tested hardware](#tested-hardware) below) or build by yourself (see [this example](http://bernard.lefrancois.free.fr)).
Teleinfo is a protocol to read many electrical statistics of your electricity meter: instantaneous power consumption, current price period, meter reading...
Before the binding can be used, a serial controller must be added. This needs to be done manually. Select __Teleinfo Serial Controller__ and enter the serial port.
If you want to place the Teleinfo modem apart from your openHAB server, you can forward its serial messages over TCP/IP (_ser2net_).
In this case you have to define the serial port of your Teleinfo modem like this `rfc2217://ip:port`. When using _ser2net_ make sure to use _telnet_ instead of _raw_ in the _ser2net_ config file.
Once the serial controller added, electricity meters will automatically appear after starting discovery, with default label __Teleinfo ADCO #adco__ where __#adco__ is your electricity meter identifier.
| hhphc | `String` | Pricing schedule group | All | HCHP |
| hchc | `Number:Energy` | Total consumed energy at low rate pricing | All | HCHP |
| hchp | `Number:Energy` | Total consumed energy at high rate pricing | All | HCHP |
| base | `Number:Energy` | Total consumed energy | All | Base |
| ejphn | `Number:Energy` | Total consumed energy at low rate pricing | All | EJP |
| ejphpm | `Number:Energy` | Total consumed energy at high rate pricing | All | EJP |
| bbrhcjb | `Number:Energy` | Total consumed energy at low rate pricing on blue days | All | Tempo |
| bbrhpjb | `Number:Energy` | Total consumed energy at high rate pricing on blue days | All | Tempo |
| bbrhcjw | `Number:Energy` | Total consumed energy at low rate pricing on white days | All | Tempo |
| bbrhpjw | `Number:Energy` | Total consumed energy at high rate pricing on white days | All | Tempo |
| bbrhcjr | `Number:Energy` | Total consumed energy at low rate pricing on red days | All | Tempo |
| bbrhpjr | `Number:Energy` | Total consumed energy at high rate pricing on red days | All | Tempo |
| pejp | `Number:Duration` | Prior notice to EJP start | All | EJP |
| demain | `String` | Following day color | All | Tempo |
## Full Example
The following `things` file declare a serial USB controller on `/dev/ttyUSB0` for a Single-phase Electricity meter with HC/HP option - CBEMM Evolution ICC and adco `031528042289` :
`adco` is a 12-digit number written on the electricity meter (There might be two additional digits on the electricity meter, in this case the two last digits must be omitted to obtain 12 digits). The first 6 digits of `adco` can also be retrieved by pushing 6 times the `selection` button of your electricity meter, and the last 6 digits by pushing the `defilement` button.
On Linky telemeters, only *historical* TIC mode is currently supported.
The method for changing the TIC mode of a Linky telemeter is explained [here](https://forum.gce-electronics.com/t/comment-passer-un-cpt-linky-en-mode-standard/8206/7).
