The Plugwise Home Automation binding adds support to openHAB for the [Plugwise Home Automation ecosystem](https://www.plugwise.com/en_US/adam_zone_control).
This system is built around a gateway from Plugwise called the 'Adam' which incorporates a Zigbee controller to manage thermostatic radiator valves, room thermostats, floor heating pumps, et cetera.
The (web) app allows users to define heating zone's (e.g. rooms) and add radiator valves to those rooms to manage and control their heating irrespective of other rooms.
Using the Plugwise Home Automation binding you can incorporate the management of these devices and heating zones into openHAB.
The binding uses the same RESTfull API that both the mobile phone app and the web app use.
The binding requires users to have a working Plugwise Home Automation setup consisting of at least 1 gateway device (the 'Adam') and preferably 1 radiator valve as a bare minimum.
| - | A Plugwise heating zone configured with at least 1 of the devices below | zone |
| [Adam](https://www.plugwise.com/en_US/products/adam-ha) | The Plugwise Home Automation Bridge is needed to connect to the Adam boiler gateway | gateway |
| [Tom](https://www.plugwise.com/en_US/products/tom) | A Plugwise Home Automation radiator valve | appliance_valve |
| [Floor](https://www.plugwise.com/en_US/products/floor) | A Plugwise Home Automation radiator valve specifically used for floor heating | appliance_valve |
| [Circle](https://www.plugwise.com/en_US/products/circle) | A power outlet plug that provides energy measurement and switching control of appliances (e.g. floor heating pump) | appliance_pump |
| [Lisa](https://www.plugwise.com/en_US/products/lisa) | A room thermostat (also supports the 'Anna' room thermostat) | appliance_thermostat |
| [Boiler] | A central boiler used for heating and/or domestic hot water | appliance_boiler |
| temperature | Number:Temperature | Yes | The temperature of an appliance that supports the thermostat functionality |
| setpointTemperature | Number:Temperature | No | The setpoint temperature (read/write) of an appliance that supports the thermostat functionality |
| power | Switch | No | Toggle an appliance ON/OFF that supports the relay functionality |
| lock | Switch | No | Toggle an appliance lock ON/OFF that supports the relay functionality.(_When the lock is ON the gateway will not automatically control the corresponding relay switch depending on thermostat mode_) |
| powerUsage | Number:Power | Yes | The current power usage in Watts of an appliance that supports this |
| batteryLevel | Number | Yes | The current battery level of an appliance that is battery operated |
| batteryLevelLow | Switch | Yes | Switches ON when the battery level of an appliance that is battery operated drops below a certain threshold |
| chState | Switch | Yes | The current central heating state of the boiler |
| dhwState | Switch | Yes | The current domestic hot water state of the boiler |
| waterPressure | Number:Pressure | Yes | The current water pressure of the boiler |
| presetScene | String | No | The current active scene for the zone |
| regulationControl | String | No | Toggle current regulation control (Active, Passive, Off) for the zone |
| coolingAllowed | Switch | No | Toggle the cooling allowed of a zone ON/OFF |
| valvePosition | Number:Dimensionless | Yes | The current position of the valve |
| preHeat | Switch | No | Toggle the pre heating of a zone ON/OFF |
| coolingState | Switch | Yes | The current cooling state of the boiler |
| intendedBoilerTemp | Number:Temperature | Yes | The intended boiler temperature |
| flameState | Switch | Yes | The flame state of the boiler |
| intendedHeatingState | Switch | Yes | The intended heating state of the boiler |
| modulationLevel | Number:Dimensionless | Yes | The current modulation level of the boiler |
| otAppFaultCode | Number | Yes | The Opentherm application fault code of the boiler |
| dhwTemperature | Number:Temperature | Yes | The current central heating state of the boiler |
| otOEMFaultCode | Number | Yes | The Opentherm OEM fault code of the boiler |
| boilerTemperature | Number:Temperature | Yes | The current temperature of the boiler |
| dhwSetpoint | Number:Temperature | Yes | The domestic hot water setpoint |
| maxBoilerTemperature | Number:Temperature | Yes | The maximum temperature of the boiler |
| dhwComfortMode | Switch | Yes | The domestic hot water confortmode |
| burnerStartsFailed | Number | Yes | Total count of failed burner starts |
| burnerStarts | Number | Yes | Total count of burner starts |
| burnerIgnitionsFailed | Number | Yes | Total count of failed burner ignitions |
| burnerOpTime | Number:Time | Yes | Total operation time |
| burnerDHWOpTime | Number:Time | Yes | Total operation time for domestic hot water |
